Description: 

---

PCIEX8 To NVME M.2 MKEY Expansion Card 2 Ports RAID Array Expansion Adapter Motherboard 2x32Gbps Transfer Speed SATA M.2 SSD PCIE Adapter
Features:
1. Product name and model: The name of this expansion card is Dual PCIEX8 To NVME M.2 MKEY expansion Card, with a model number of PH45.
2. Supported hard drive types: This expansion card supports MKEY hard drive types, making it perfect for use with NVME M.2 SSDs.
3. Transfer speed: This raid array expansion adapter motherboard provides two channels, each with a transfer speed of 32Gbps, resulting in a total transfer speed of up to 64Gbps.
4. Packaging: This sata m.2 ssd pcie adapter comes in neutral leather box packaging, with a size of 19.5x13x3.2cm, net weight of 52g, and gross weight of 109g.
5. Usage instructions: In order to use this add on card, the following conditions must be met:
- The motherboard must support PCI-E splitting and be able to set PCI-E X4X4X4 or 4X4 mode.
- The motherboard must support PCI-E RAID.
- ASUS motherboards need to support HyperM.2X16 expansion card function.
- The number of PCI-E splitting channels on the motherboard will affect the number of M.2 SSDs or devices supported by this card. Different motherboards may have different splitting channel numbers, so the appropriate motherboard should be chosen.
- For some motherboards that share PCI-E channels, even if they support PCI-E splitting, they may not be able to recognize multiple M.2 SSDs or devices. In such cases, remove or replace other PCI-E devices, such as graphics cards, expansion cards, or onboard NVME SSDs.
- It is recommended to refer to the list of ASUS and ASRock motherboards that support PCI-E splitting when selecting an appropriate motherboard.
- Server motherboards, X299 and X399 motherboards usually have splitting functionality.

 

Specification:
Certification: NONE
Origin: Mainland China
Interface Type: PCI Express
Model: PH45
Support hard disk: MKEY hard disk
Transfer speed: 2*32Gbps
Packaging: neutral kraft box packaging
Package size: 19.5*13*3.2CM/7.68*5.12*1.26INCH
Product weight: net weight 52g gross weight: 109g

Instructions for use:
1. The motherboard must support
motherboard support PCI-E split function, able to set PCI-E X4X4X4 or 4X4 mode;
Motherboard supports PCI-E RAID function;
ASUS motherboards support the function of HyperM.2X16 expansion cards;
different motherboards PCI-E split channel number varies, some motherboards PCI-E RAID is X8 + X4 + X4, this motherboard 4-bit M.2 card can only support 3 M.2 SSD or device, 2-bit M.2 card can only support 1 M.2 SSD or device, if you need to use this product properly please select the correct motherboard;;
    Many motherboards are shared PCI-E lanes, make sure the motherboard can support the PCI-E split function, but can not identify so many M.2 SSDs or devices, please remove or replace the other PCI-E devices in the slot, such as graphics cards, expansion cards, onboard NVME SSDs, etc.

For ASUS motherboards that support PCI-E splitting, please refer to the following link
https://www.asus.com/tw/support/FAQ/1037507

For ASRock motherboards that support PCI-E splitting, please refer to the following link
https://www.asrock.com/mb/spec/product.cn.asp?Model=ULTRA%20QUAD%20M.2%20CARD#SupportList

Server motherboards, X299, X399 motherboards many of them have split function.

2. Need CPU support, the CPU should have enough channels, generally low-end CPUs do not have enough PCI-E channels so may not be able to support, in the purchase of CPUs can refer to the introduction of the motherboard to make the right choice;

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.

     Included:

---

1 x Adaptor card
1 x Full height chassis baffle
1 x Half-height chassis bezel
1 x Chassis screws
2 x Locking bezel screws
2 x Locking plate screws
2 x Mobile studs
1 x Screwdriver