12V 24V DC Dual Spindle Motor Drive Kit 775 795 895 DC Motor Large Torque Timing Belt Pulley 60 80 Teeth Synchronous Wheels
Introduction
The dual-motor drive increases the torque output, has low noise, and can be used in a fixed manner.
It can be installed with various tools such as grinding wheels, cutting, chucks, chucks, etc.,
Dual motors drive an 8mm shaft
Designed to increase motivation
High speed, low noise, high synchronization rate, can be used as power generation or power output shaft.
Specifications
775 DC Motor
Power : 80W
Rated voltage : DC 12V ; DC 24V
No load speed : 12v is 5000rpm per minute ; 24v is 10000rpm per minute (plus and minus 10% fluctuation)
Working current : 4A or more
795 DC Motor
Power : 100W
Rated voltage : DC 12V ; DC 24V
No load speed : 12v is 6000rpm per minute ; 24v is 12000rpm per minute (plus and minus 10% fluctuation)
Working current : 4A or more
895 DC Motor
Power : 368W
Rated voltage : DC 12V ; DC 24V
No load speed : 12v is 6000rpm per minute ; 24v is 12000rpm per minute (plus and minus 10% fluctuation)
No load current : 0.9A
Timing Belt Pulley
60 teeth with 16 teeth, the speed ratio is 1 to 3.75
Timing belt length is 200mm and 280mm circumference
The total length of the output shaft is 130mm, the diameter is 8mm, and the material is hardened shaft with high precision
There are 4 shock-absorbing leather feet installed on the bottom to slow down vibration and eliminate noise very well
Some Samples: