Product Overview
White LED Headlight Fog Light Bulbs For Chevy Silverado 1500 2500 2007-2015

Detail 

Description
--Plug Type: 9005 + H11 + 5202,Hi-Lo Beam
--Power(per set): 1320W@high beam, 1320W@ low beam
--LED Quantity(each bulb): 2pcs
--Luminous Flux: 198000lm/set(99000lm/bulb)
--Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
--Color Temperature: 6000K Pure White
--IP67 rated water and dust seal,over 50000hrs lifetime
--Beam Angle: 270 degree@low beam,360 degree@high beam
--Material: Aviation 6063 aluminum profile
--Operating Temperature: -40-80 degree Celsius
--Usage: Headlight
 
Feature:
--(6pcs/set)9005+H11+5202 Hi-Lo Beam LED headlight conversion kit
--Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
--Xenon white light reflect road paint/signs better to show clearer road situation during night driving
--270 degree low beam angle with cut-off line,will not dazzle oncoming traffic
--All-in-one heat conduction+high speed mute fan system keep the light bulb in appropriate working temperature
--Built-in constant current CPU, instant full brightness without start-up relay
--It can directly replace the traditional tungsten bulb of the original car;
--The LED has high luminous purity, no need for lampshade filtering, and the light wavelength error is within 5 nanometers
--There is no delay when the LED lights up, while the traditional tungsten bulb has a delay of 0.3 seconds.
--LED has low power consumption. When it reaches the same brightness of traditional bulbs, it consumes only 6% of traditional bulbs, and it also saves electricity and fuel!
--It has a long life, its filament-free structure does not generate heat, and it can be used for more than 6 years under normal conditions
--LED car lights can make the vehicle control circuit not easy to oxidize, with a maximum load current of 0.1A.
--High-power chips, ultra-thin board shape design makes the installation and fit better, the illumination is more uniform, and avoids the disadvantages of poor illumination width caused by the point light source; Our Lights suitable for use with 12-30V voltage.Our Lights has the characteristics of light diffusivity, wide-angle illumination and high lumen;
--No delay in lighting, high light purity, strong color rendering and penetrating power;
--Using LED light-emitting diodes, low power consumption, can better protect the car circuit;
--Our LED Lights has no filament, good heat dissipation, low current, low heat generation, and the vehicle circuit is not easy to oxidize;
--Super bright, can be used for a long time in the temperature range of (-30℃ to +85℃)
--Strong shock resistance and low temperature rise, it is a new generation of revolutionary solid-state light source;
 
Two-way heat dissipation channel
1.All-in-one aluminum profile as heat conduction system, 360 degree heat radiating
2.High speed mute fan(12000R/Min),high Air flow for faster cooling rate
 
 
 
 
【Note】:
No need to modify the circuit, directly replace the original traditional glass bulb, pay attention to the high temperature of the original bulb to prevent burns!
When installing, refer to the product dimensions and pay attention to the size of the installation location. Carefully press and do not squeeze the LED chip to avoid damage. The LED has positive and negative polarity, if it is not bright, turn the direction and reinstall;
 

 
Package Included:
2 x 9005 LED headlight bulbs
2 x H11 LED headlight bulbs
2 x 5202/H16 LED Fog Light bulbs
 
LED headlight advantages:
****LED lamps are more energy and power than conventional halogen lamps.
****The brightness is close to the xenon lamp, but the LED lights are illuminated without delay to enhance road safety.
****Instantly start without strong current impact, improve battery life by more than 30%.
****Fast cooling , using the most advanced, heat-dissipating structural design.
****The power driver adopts a wide voltage constant current mode which has a simple structure, so that the automobile can flexibly cope with various voltage unstable conditions, and has achieved the purpose of less component damage. Compared to HID ballast maintenance, The repair probability is very low which is less than 80%.
****Low heating temperature, The working temperature of helium can reach 800°-1000°
****LED headlight has a simple structure, and the parts are less than the xenon lamp, which is lower than the xenon lamp failure rate!
 
 
 
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.

All items will be checked before packing. All items are new and of high quality.

Item will be shipped within 1 business days upon receipt of payment, excluding weekends and public holidays.

If to USA, we will ship your order by USPS, it will take about 7-10 working days to you, and you can track it on line. If to other country, we will ship your order by China Post or Hong Kong Post Air Mail, it will take about 14-21 working days to you, you also can track it on line.

Delivery time is about 14-28 business days and it may take up to 8 weeks to some European countries and South American countries due to strict custom inspection. We ship worldwide.

Shipping fee include packing, warehouse, distribution, order handling and processing costs.We offer combined shipping discount on Shipping & Handling.

Please note that some countries will have custom duty or tax for certain items. It is the buyer's responsibility to pay all endued custom duty or tax. We are not responsible for any custom duty or tax since our price do not include this charge.

1. PayPal payment accepted only.

2. Items will be shipped to your eBay address. Please make sure it is correct.

3. Payment must be received 4 days after auction ended.

1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.

2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.

3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.

4. We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication with us. Please allow max 2 business days for us to response.

When you satisfied with our product and services please leave us positive feedback.

If a problem occurs, contact us immediately with any email request. Just contact us using the " Ask the seller a question" link on eBay.

Product Overview
Description
--Plug Type: 9005 + H11 + 5202,Hi-Lo Beam
--Power(per set): 1320W@high beam, 1320W@ low beam
--LED Quantity(each bulb): 2pcs
--Luminous Flux: 198000lm/set(99000lm/bulb)
--Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
--Color Temperature: 6000K Pure White
--IP67 rated water and dust seal,over 50000hrs lifetime
--Beam Angle: 270 degree@low beam,360 degree@high beam
--Material: Aviation 6063 aluminum profile
--Operating Temperature: -40-80 degree Celsius
--Usage: Headlight
 
Feature:
--(6pcs/set)9005+H11+5202 Hi-Lo Beam LED headlight conversion kit
--Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
--Xenon white light reflect road paint/signs better to show clearer road situation during night driving
--270 degree low beam angle with cut-off line,will not dazzle oncoming traffic
--All-in-one heat conduction+high speed mute fan system keep the light bulb in appropriate working temperature
--Built-in constant current CPU, instant full brightness without start-up relay
--It can directly replace the traditional tungsten bulb of the original car;
--The LED has high luminous purity, no need for lampshade filtering, and the light wavelength error is within 5 nanometers
--There is no delay when the LED lights up, while the traditional tungsten bulb has a delay of 0.3 seconds.
--LED has low power consumption. When it reaches the same brightness of traditional bulbs, it consumes only 6% of traditional bulbs, and it also saves electricity and fuel!
--It has a long life, its filament-free structure does not generate heat, and it can be used for more than 6 years under normal conditions
--LED car lights can make the vehicle control circuit not easy to oxidize, with a maximum load current of 0.1A.
--High-power chips, ultra-thin board shape design makes the installation and fit better, the illumination is more uniform, and avoids the disadvantages of poor illumination width caused by the point light source; Our Lights suitable for use with 12-30V voltage.Our Lights has the characteristics of light diffusivity, wide-angle illumination and high lumen;
--No delay in lighting, high light purity, strong color rendering and penetrating power;
--Using LED light-emitting diodes, low power consumption, can better protect the car circuit;
--Our LED Lights has no filament, good heat dissipation, low current, low heat generation, and the vehicle circuit is not easy to oxidize;
--Super bright, can be used for a long time in the temperature range of (-30℃ to +85℃)
--Strong shock resistance and low temperature rise, it is a new generation of revolutionary solid-state light source;
 
Two-way heat dissipation channel
1.All-in-one aluminum profile as heat conduction system, 360 degree heat radiating
2.High speed mute fan(12000R/Min),high Air flow for faster cooling rate
 
 
 
 
【Note】:
No need to modify the circuit, directly replace the original traditional glass bulb, pay attention to the high temperature of the original bulb to prevent burns!
When installing, refer to the product dimensions and pay attention to the size of the installation location. Carefully press and do not squeeze the LED chip to avoid damage. The LED has positive and negative polarity, if it is not bright, turn the direction and reinstall;
 

 
Package Included:
2 x 9005 LED headlight bulbs
2 x H11 LED headlight bulbs
2 x 5202/H16 LED Fog Light bulbs
 
LED headlight advantages:
****LED lamps are more energy and power than conventional halogen lamps.
****The brightness is close to the xenon lamp, but the LED lights are illuminated without delay to enhance road safety.
****Instantly start without strong current impact, improve battery life by more than 30%.
****Fast cooling , using the most advanced, heat-dissipating structural design.
****The power driver adopts a wide voltage constant current mode which has a simple structure, so that the automobile can flexibly cope with various voltage unstable conditions, and has achieved the purpose of less component damage. Compared to HID ballast maintenance, The repair probability is very low which is less than 80%.
****Low heating temperature, The working temperature of helium can reach 800°-1000°
****LED headlight has a simple structure, and the parts are less than the xenon lamp, which is lower than the xenon lamp failure rate!
 
 
 
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.

All items will be checked before packing. All items are new and of high quality.

1. Can you tell me when my order will be shipped?
Actually we will ship the item within 1 business day after receiving orders, excluding weekends and public holidays.
But USPS need to take longer time to update tracking info and arrange delivery during the challenging time for now.
If your order was not shipped more than 3 business days, please contact us with your order number to get quick support.

2. My item has not arrived, what's taking so long?
Sometimes items take longer than expected, especially if it's going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap.

1. Instant PayPal payment is the preferred method of payment.
We also accept payment via PayPal, DebitCard, Visa, MasterCard, Discover.

2. Items will be shipped to your eBay address. Please make sure it is correct.

3. If you want to ship to other address, please change your PayPal shipping address before you make payment.

4. Payment must be received 4 days after auction ended.

1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.

2. We offer free return & money back guarantee. If you are not satisfied with your purchase for any reasons, you can return the item for refund or replacement/exchange. All returns must include the original packaging.

3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner. Any items damaged because of incorrect installation will not be refunded. Please contact us for return or troubleshooting help prior to returning any products.

4. We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication with us. Please allow max 2 business days for us to response.

1. When you satisfied with our product and services please leave us positive feedback.

2. If you have ANY questions with shipping, product or service, please Contact Us first before leaving feedback/write a review or filing a return case. We will solve the problem! If you have ANY questions with shipping, product or service, please Contact Us first before leaving feedback/write a review or filing a return case. We will solve the problem! We always put our customers first and your satisfaction is guaranteed.

 

DataCaciques