Description

The hammer machine is made of premium aluminum and plastic with high strength. The three functions (hammer/drill/pick) can meet your various needs and the powerful engine can promote your efficient work. It is an ideal choice for electricians, carpenters, etc.

Applications

Hammer Function (Drilling While Hammering)

Scope of Application:

This applies to drilling holes in concrete, floors, brick walls, stones, and solid walls. It is suitable for electricians and carpenters.

Pick Function (Hammer Without Drilling)

Scope of Application:

It is suitable for crushing, chiseling, digging, grooving, cutting, and other operations on concrete, masonry structure, and asphalt pavement.

Specification

Color: Black

Material: Aluminum, Plastic

Style: Modern

Surface Treatment: Painted Process

Assembly Required: Yes

Power: 1200W

Displacement: 32.6cc  

Engine Type: Single Cylinder, Air Cooling, 2-stroke

Impact Frequency: 3200min-1

Impact Energy: 30J

Max Torque and Speed: 1.5N.m/5000rpm

Fuel Mixture Ratio: 25:1 (Gasoline: Motor Oil)

Fuel Tank Capacity: 0.9L/0.2gal/30Oz

Fuel Consumption Rate: ≤0.5L/0.1gal/16Oz Per Hour

Max Drilling Diameter: 40mm/1.5inch

Starter System: Hand Pull Start

Noise: ≤104dB

Net Weight (Exclude Drill): About 10.5kg/23lbs

Product Size (L*H): 63*24cm/24*9inch

Engine Size: 36*32mm/14*12inch

Drill Size: 22*350mm/0.8*13inch

Point Chisel Size: 18*350mm/0.7*13inch

Flat Chisel Size: 16*280mm/6*11inch

Auxiliary Handle Length: 13cm/5inch

Installation

• Press down the collet.
• Put in a drill bit or chisel.
• Release your hand.
• The installation is complete.

Package Included

1* Hammer Drilling Machine

3* Drills

1* Point Chisel

1* Flat Chisel

1* Fuel Tank

1* Funnel

Other Accessories for Assembly

Key Features

Strong Power: The two-stroke engine with high power (1200W) and large displacement (32.6cc ), as well as an enlarged thick-walled cylinder, can achieve a high impact frequency (3200min-1) and impact energy (30J) to easily and quickly penetrate concrete, bricks, rocks, etc with a high speed (5000rpm).

3-in-1 Functions: Equipped with three drill bits and two different chisels, it can be used for hammer, drill, or pick by adjusting the knob on the side to meet your diversified needs .

Saving Fuel: The built-in carburetor can fully atomize fuel to decrease its consumption rate to save costs.

Good Filtering Effect: The built-in air filter can well filter impurities in gasoline to reduce engine consumption and extend its service life.

High-quality Materials: The aluminum material with a painted process is glossy and can resist wear, corrosion, and heat. Meanwhile, the plastic material is shock-resistant and anti-deformation.

Easy to Use: The wireless design and light weight can improve the flexibility of operation. You can pull the rope to start the machine. Besides, the throttle switch, one-button flameout switch, and anti-skid auxiliary handle allow for convenient use.

Firm Clamping: The collet adopts a clamping design to prevent the drill bit or chisel from falling off.

Guaranteed Customer Service: We aim to provide quality products and services. If you have problems, please feel free to contact us. We will reply and solve the problem for you as soon as possible.

Details

Heat Dissipation Holes: The heat dissipation holes on the sides can dissipate heat in time and prolong the service life of this product.

Fuel Tank: The large fuel tank (0.9L) can avoid frequent adding. Meanwhile, the semi-translucent design is convenient for you to observe the remaining fuel quantity and add fuel in time.

Muffler: The internal silencer can reduce the noise (≤104dB) when in use to protect your hearing.

Notes

• Before each use, please check whether the oil bubble is full of oil. If the oil is not enough, you need to press the carburetor until the oil is full. It is best to press the carburetor every time you use it. Please replace the air filter sponge after 36 hours of continuous operation to avoid damage to the engine cylinder.
• Please clean up the oil in the carburetor if it is not used for a long time. The carburetor does not need to be replaced if it can be used normally.
• Please add lubricating oil regularly to ensure strong power.
• Please do not touch the muffler exhaust hole to avoid scalding.
• The mixing ratio of gasoline and engine oil is generally 25:1, but due to the difference of engine oil quality in different regions, we recommend the ratio of 20:1. Please do not use cheap inferior engine oil.
• Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.