System Features:

48 kinds of commonly used graphics library (including grid graphics), instead of setting sheet size and hole size.

  �1�78�1�75 supports EIA code (G code) and FastCAM, FreeNest, SmartNest, IBE and other categories

Support suffix TXT, CNC, NC, MPG, B3 and other G codes.

  �1�78�1�75 supports common commands of ESSI code.

  �1�78�1�75 compact keyboard design, but the function is not simple, making manual input file more comprehensive



Graphic scale, rotation, precision adjustment

  �1�78�1�75 graphics can be divided by matrix, interactively, and stacked

  �1�78�1�75 The original size of the workpiece and the slit size are displayed simultaneously, which is intuitive and convenient

  �1�78�1�75 Graphic steel plate correction, any steel plate edge can be used as correction edge

  �1�78�1�75 Customizable coordinate system, supporting all eight possibilities of two-dimensional coordinates

  �1�78�1�75 can customize the type (normally open or normally closed) and number of all input and output ports

  �1�78�1�75 can self-diagnose all IO states and button states of the system for easy inspection and troubleshooting

  �1�78�1�75 front U disk interface, convenient for gram transfer

  �1�78�1�75 system upgrade adopts U disk upgrade method, which is convenient, simple, practical, and vides lifetime upgrade service

  �1�78�1�75 supports system backup and system restore functions. The system restore can restore the operating system alone or restore

Factory status

  �1�78�1�75 All functions and cesses of the entire system are slightly upgraded online, eliminating the after-sales worry

  �1�78�1�75 can be split or all import and export cessing files

  �1�78�1�75 Parameter backup and parameter restoration

  �1�78�1�75 supports 4 modes: oxygen gas, plasma, powder spraying and demonstration

  �1�78�1�75 category cessing parameters are complete, can meet the needs of different cesses

  �1�78�1�75 Oxygen gas and plasma IO are controlled separately

  �1�78�1�75 Oxygen gas automatic height adjustment, two-stage preheating, three-stage perforation

  �1�78�1�75 Plasma arc voltage feedback, positioning feedback, automatic turning off arc voltage height adjustment

  �1�78�1�75 suffixed with T controller, its own integrated arc voltage height control function (THC)

  �1�78�1.75 Built-in plasma arc voltage automatic/manual height adjustment function: can display the actual arc voltage and set arc voltage, set arc voltage

Increase the parameters, detect collision/positioning success signal, arc starting signal control, positioning test

  �1�78�1�75 Plasma arc voltage control supports two closed arc voltage height adjustment methods of speed and distance, which makes the machine tool more stable.

Safety

  �1�78�1�75 supports edge cutting, which can reduce preheating time for thicker steel plates

  �1�78�1�75 Real-time acceleration and deceleration during movement

  �1�78�1�75 According to the thickness of the steel plate, the speed can be automatically limited at the corner to effectively prevent overburn

  �1�78�1�75 Manually select the starting line or select the perforation point

  �1�78�1�75 dynamic/static cessing graphics display, graphics zoom in/out, dynamic tracking of cutting points in zoomed state

  �1�78�1�75DSP high-speed, advanced interpolation control, high-speed operation, stable operation, low noise

  �1�78�1�75 arbitrarily set the starting speed, the lifting speed

  �1�78�1�75 has power failure, breakpoint tection memory function

  �1�78�1�75 The ``cutting size'' function can avoid the waste of the plate caused by the wrong layout calculation

  �1�78�1�75 can set different management permissions and corresponding passwords to tect the rights and interests of equipment manufacturers

  �1�78�1�75 supports P2P mode or BCD (8421) and serial RS232 mode remote control

  �1�78�1�75 supports laser point function

  �1�78�1�75 supports plasma dynamic perforation function

  �1�78�1�75 Processing piece counting, running time, perforation times and other information statistics

 


Technical index:

1) Number of control axes: 2-axis linkage (three-axis or four-axis can be customized)

2) Control accuracy: ±0.001mm

3) Coordinate range: ±99999.99mm

4) Maximum pulse frequency: 200KHz; Maximum operating speed: 15m/min

5) Maximum number of gram lines: 80,000 lines

6) The largest gram: 4M

7) Time resolution: 10ms

8) System working power: DC + 24V DC power input, power is greater than 80W.

9) System working environment: temperature -10℃ to +60℃; relative humidity 0-95% non-condensing

10) Maximum power of driving arc voltage height adjustment motor: 45W (Note: only with T system). If you need volume work

Rate, optional up to 200W.

System interface:

a) DB15 core male two-axis motor drive interface

b) DB25 core female head 16-channel photoelectric isolation output, the maximum reverse current is 300mA

c) DB25 core male connector 16-channel photoelectric isolation input, maximum input current 300mA

d) Built-in USB interface on the front panel, convenient for users to transfer cutting code

e) Extended IO input and output port; PWM input port; analog input port

f) Optional standard DB9 core male serial port RS232 interface

The following interfaces are only available for F2000 series CNC systems with "T":

g) The arc voltage input divider ratio is selected instead of 1:50 or 1:100

h) 5-core arc voltage height adjustment motor output and limit input port

i) 7-core arc voltage and positioning input, arc starting signal output port

 


Hardware Configuration:

1. Display: 7 inch 800 * 480 high resolution 16 million colors color high brightness LCD screen

2. Memory: 64M SDRAM

3. User gram space: 256M

4. Main frequency: 400MHZ system main frequency

5. USB: USB1.1 interface front end, supports at least 16GB USB flash drive.

6. Keyboard: PCB film keyboard

7. Chassis: The all-steel structure is completely shielded, which can truly prevent electromagnetic radiation, anti-interference, and anti-static