Multi-Function Wall Stud Sensor DetectorMulti-Function Wall Stud Sensor Detector
Stud finder is a easy-to-use, also a necessary tool that quickly locates the edges of wood and metal studs and joists behind walls, floors, and ceilings etc.

This stud finder operates by slowly slide device horizontally across wall, right of left. When full bars appears on the LCD and steady tone sounds, you have located the edge of the stud.

Battery installation 1.Open battery door on back of case. 2.Connect a 9-volt battery to battery clip. 3.Insert battery into case and replace battery door.

【Electronic Stud Finder】 - Used to detect the specific location of wood, wires, metal, nails, pipes, and other building materials in walls. Equipped with 4 advanced upgraded sensors and a magnetic stud detector function, this wall scanner provides higher accuracy than comparable products, helping us complete renovation work quickly and efficiently.
【Upgrade 7-in-1 Multi-function Scanner】-With 3-stage wooden beam keel detection mode: (12/25/38mm); Magnetic and non-magnetic metal detection and identification: (up to 81mm); AC line scan: (up to 51mm); Magnetic stud detector function; Ruler function; Automatic calibration
【Smart Stud Sensor】 - Just turn on the "Wall Detector" button, then press and hold the scan button to start automatic calibration and move horizontally against the wall. When it encounters an object on the wall, the LCD sn shows the precise location of the required stud material and stud, and displays a red light and buzzer. The best woodworking drilling positioners in 2021.
【High performance】-This wall scanner has a backlit LCD display; Three-color LED display: (green light - no signal), (yellow light - signal), (red light - strong signal); Low battery indicator; 9V carbon battery power supply (included), the maximum working current is 15mA, can be used continuously for 6 hours, 5 minutes a day can be used for half a year.
【One machine for multiple purposes】-We have been committed to the research and development of stud detectors for many years. It is ergonomic, comfortable to use and lightweight. For your DIY home projects such as: TV, cabinets, garage racks, paint, house decoration, etc. With the Wall Detector, accurate and fast positioning avoids loss or rework due to opening errors.

LCD & 3 color LEDs show measurement results
Low battery prompt
Beep code prompt
Wood Stem Center Positioning & Edge Positioning
3) Detects the center of the wooden terrier with a wall thickness of within 1/2 inch (12 mm)
4) Detectable wood stem center with wall thickness within 1 inch (25 mm)
5) Detectable wood stem center with wall thickness within 1 1/2 inches (38mm)
Magnetic and non-magnetic metal detection (up to 81mm)
AC wire detection mode (up to 51mm deep)
Look for the nail feature
Working temperature: 0~40°
Working voltage: single 9V battery
Operating current: 〈20mA
Product size: 185*80*23mm
The product has a scale scale function
Product certification: CE\ROHS\UKCA

Pack List:
1* stud finder scanner
1* Battery

 

Your satisfaction is our top goal,we appreciate your business.

1. If you have any questions, please feel free to contact with us by ebay Message during our business hours ( 9:00a.m. to 6:00 p.m.), or email us through eBay, we will try our best to help you to resolve it.

2. If you are satisfied with our service, please rate the details of the transaction (Detailed Seller Ratings) on eBay and We will do the 
same for you.

3. If you are not satisfied with the product or service ,please contact us before leave negative or natural feedback, we will try our best to solve the issue to your satisfaction, thanks.

☆★☆★☆

Thanks for your patronizing, good luck ！！