Welcome to llppwe❤, have a good day!!!
 |  |  |
| The Hi/Lo Section of the Pump Is All Aluminum and the End Plates Are Cast Steel. Good Abrasion Resistance, Durable. | The 2-Stage Pump Can Give You Faster Cycle Times and Higher Possible Pressure with a Small Engine. Excellent for Use on Log Splitters. | Equipped with 1/2" Pump Shaft, the Log Separator Is Compatible with Horizontal and Vertical Shaft Engines. It Greatly Reduces the Difficult-to-solve Problems When Replacing and Operating Products. |
 Packing Include:1 * 13 Gpm Hydraulic Log Splitter Pump | 13gpm Hydraulic Log Splitter Pump
Features:Minimum 8 Hp or Larger Gas Engine For Use with Open Center Hydraulic Systems Only | Specifications:
|
Widely Application:
Very Suitable for Power Devices of Fellers, Presses, Machine Tools, and Snowplows.
 |  |  |
The 2-Stage Pump Can Give You Faster Cycle Times and Higher Possible Pressure with a Small Engine. Excellent for Use on Log Splitters. 85% Efficient.
Suggested Applications: Presses, Log Splitters, Clamping Units and Compacto
Specifications:
New Hydraulic Log Splitter Pump 13 Gpm
Shaft: ½"
Inlet Port: 150mm
Outlet Port: 230mm
Minimum 8 Hp or Larger Gas Engine.
For Use with Open Center Hydraulic Systems Only
Maximum Pressure: 3000 Psi
Bolt Circle: 2.83in.
4 Holes Spaced 2" on Center
Mounting Hole Diameter: 344in
Woodruff Key: 1/8in
Rotation Is Clockwise
This 2 Stage Pump Can Give You Much Faster Cycle Times and Higher Possible Pressures with a Small Engine. Excellent for Use on Log Splitters. 85% Efficient.
The Hi/Lo Section of the Pump Is All Aluminum and the End Plates Are Cast Steel. Applications for the Hi/Lo Pump Are Log Splitters, Presses Etc Where Rapid Movement of the Cylinder at Low Pressure Is Required Prior to Automatically Switching to the High Pressure Mode to Meet Load Requirements.
Packing Include:
1 Pc 13 Gpm Hydraulic Log Splitter Pump
New Hydraulic Log Splitter Pump 13 Gpm
Shaft: ½"
Inlet Port: 150mm
Outlet Port: 230mm
Minimum 8 Hp or Larger Gas Engine.
For Use with Open Center Hydraulic Systems Only
Maximum Pressure: 3000 Psi
Bolt Circle: 2.83in.
4 Holes Spaced 2" on Center
Mounting Hole Diameter: 344in
Woodruff Key: 1/8in
Rotation Is Clockwise
This 2 Stage Pump Can Give You Much Faster Cycle Times and Higher Possible Pressures with a Small Engine. Excellent for Use on Log Splitters. 85% Efficient.
The Hi/Lo Section of the Pump Is All Aluminum and the End Plates Are Cast Steel. Applications for the Hi/Lo Pump Are Log Splitters, Presses Etc Where Rapid Movement of the Cylinder at Low Pressure Is Required Prior to Automatically Switching to the High Pressure Mode to Meet Load Requirements.
Packing Include:
1 Pc 13 Gpm Hydraulic Log Splitter Pump
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Shipping:
2-9 working days to: USA
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
