Description
ADS1292R ECG Module ECG Front End Respiration Heart Rate Impedance Acquisition Suitable for STM32
Description:
ADS1292R is a dual-channel, 24-bit analog front end with low power consumption. It is used for bio-potential measurements. The ECG front end is particularly suitable for medical instrumentation and high-precision data acquisition. The board is added with pin function and Bluetooth wireless transmission, which is free from the shackles of measurement, making the experiment simple and enabling easy application.
Features:
- Two low-noise PGAs and two high-resolution ADCs
- Maximum power consumption: 335μW/channel
- Input-referred noise: 8μVPP
- Data rate: 125SPS to 8kSPS
- CMRR: 120dB
- Programmable gain
- Supported power supplies: uni-polar or bipolar. Analog: 2.7V to 5.25V; Digital: 1.7V to 3.6V
- Built-in right leg drive amplifier, lead-off detection and test signals
- Integrated respiration impedance measurement
- SPI-compatible serial interface
- Operating temperature range: –40°C to +85°C
Package Included:
- 1 x Board
- 1 x Electrode cable
- 3 x Stick-on electrodes
Packaging Details:
- G.W.: 0.3kg
Notice:
- This device is NOT intended to be used in/as medical diagnostic equipment. This is intended to be used solely for evaluation and research purposes only.
Attention:
1. Place the electrodes as close to the heart as possible.
2. Ensure the accurate location of RA and LA.
3. Keep your body still during the test.
4. Try to use disposable electrodes and avoid reuse.
5. The contact surface should be cleaned to ensure good contact with the body.
6. Pay attention to waterproofing and do not short circuit.
Description:
ADS1292R is a dual-channel, 24-bit analog front end with low power consumption. It is used for bio-potential measurements. The ECG front end is particularly suitable for medical instrumentation and high-precision data acquisition. The board is added with pin function and Bluetooth wireless transmission, which is free from the shackles of measurement, making the experiment simple and enabling easy application.
Features:
- Two low-noise PGAs and two high-resolution ADCs
- Maximum power consumption: 335μW/channel
- Input-referred noise: 8μVPP
- Data rate: 125SPS to 8kSPS
- CMRR: 120dB
- Programmable gain
- Supported power supplies: uni-polar or bipolar. Analog: 2.7V to 5.25V; Digital: 1.7V to 3.6V
- Built-in right leg drive amplifier, lead-off detection and test signals
- Integrated respiration impedance measurement
- SPI-compatible serial interface
- Operating temperature range: –40°C to +85°C
Package Included:
- 1 x Board
- 1 x Electrode cable
- 3 x Stick-on electrodes
Packaging Details:
- G.W.: 0.3kg
Notice:
- This device is NOT intended to be used in/as medical diagnostic equipment. This is intended to be used solely for evaluation and research purposes only.
Attention:
1. Place the electrodes as close to the heart as possible.
2. Ensure the accurate location of RA and LA.
3. Keep your body still during the test.
4. Try to use disposable electrodes and avoid reuse.
5. The contact surface should be cleaned to ensure good contact with the body.
6. Pay attention to waterproofing and do not short circuit.
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
On Apr 23, 2024 at 05:54:56 PDT, seller added the following information: