1. Built-in Smart Coulombmeter chip. It has high-precision computing power. Can display the remaining power in real time.
2. Digital display: It has a high-definition digital display sn. Display countdown in various modes
Headlight parameters
Name: Bicycle Headlight
Material: aluminum alloy
Charging interface: TYPE-C
Battery : Battery*2 Battery capacitance:4000mAh
input / output: 5V / 2A Voltage: 3.7V
Charging time: 4.5 Hours
Working time: 4~14 Hours High Mode:W orking 4Hours , low mode:working 14hours.
Szie: 98 * 46 * 38mm
Irradiation distance: 300-500 meters
Bulb type: 5 LED white led
Holder: 15 ° rotating stand
Waterproof: IPX5 (proof from rain and splash water)
Power Bank function:
5200 mAh battery(*2). 5V / 2A input / output. Can charge your phone. also can use it as a bicycle power bank
TYPE-C Charging port:
Fast charging. After fully charged. It will automatically disconnect the power. To protect the battery. Extend battery life
5LED Tailight:
50Lumens USB Rechargeable Bicycle Rear Light Cycling LED Taillight Waterproof MTB Road Bike Tail Light Back Lamp for Bicycle
Features and specifications:
Key features:
• Built with super bright 5 Red LED and RGB Blue+red led
• Compact in size, light weight, rain waterproof design
• Casing made of 100% new PC+ABS material
• 330 mAH lithium battery;runtime:8hours
• USB Rechargeable
• Angle 240°
• Equipped with gel strap, wide range of applications
• Easy installation without involving any tools
Specifications:
• Light source: 5 Red LED
• Output: 50 lm
• Color: Red
Light Modes:
Red Light
- 4 Modes:Slowly Flash/Fast Flash/SOS/ Steady Light
- Light Color: red
- Light Mode: Single color change
• Beam angle: 120° chips, 240° diffuser
• Battery: Lithium battery 330 mAH (volume cheating condemned)
• Charge: 5 V/1A max (about 2 hours to full charge)
• Burning time: Please refer to the below chart
• Ingress protection: IPX6, rain waterproof (do not use in water)
• Material: PC + ABS plastic casing, electronic devices
• Size: 71 x 22 x 21 mm (approx.)
• Net weight: 35 grams (approx.)
• Origin: Made in China (Mainland)
Product includes:
• 1 x Lamp with mount gel strap
• 1 x USB cable
Warnings:
1) Do not charge over 5 V/1A to prevent battery damage.
2) Do not look at or shine the light directly in eyes.
3) Keep away from children.
4) Charge the light before the battery is low or off.
5) Do not use in water for long time.
6) Do not place this list in or near fire.
Laser Tailight:
Descriptions:
Material: High quality ABS
LED: 5 pieces LEDs
LD: 1 piece LD (leser)
Brightness: 150 lumens
Waterproof: IP55 waterproof rate
Product size: 95*28*23mm
Battery: 3.7V 500mAh Li battery
Working hours: With Leser and LED function working together, constant light for about 2.5 hours, quick flash 5 hours, slow flash,7 hours
With a quick release silicone strap, fits for most bike handlebars, easy to install and remove without any tool
IP55 Waterproof rate can fit for different kinds of environment, no worry about rainy days, lengthen it’s working life
USB rechargeable can be convenient and more environment friendly.
LD & Leser Function, with cool laser line, makes you and your bicycle be protected in the center of the leser line.
With leser line and leser point function, can use as a leser pen, play with your pets!
Package include:
1 * LED & Leser Bicycle light
1 * Silicone bracket
1 * USB Cable
Remote Control Bicycle Direction Lamp
High quality remote control LED directional light is used for night use, such as cycling, baby carriage, jogging, walking, road emergency and camping. Its directional flashing indicates that night travel safety factor is greatly enhanced.
Characteristic:
1. wide visual range.
2. easy to install.
3. use the built-in500mAh Rechargeable battery;Lift time:4-5hours
4. surface waterproof effect reaches IPX2,guarantee daily use.
5. high quality LED, guarantee the warning effect.
6.Warning LED:RED AND BLUE FLASHing
Matters needing attention:
1. do not disassemble and refit without permission.
2. This product only protects again rain. Please don’t immerse it in water.
3. after use ,please turn off the tail switch button ,to avoid battery leakage of electricity.
4. Pay attention to the battery is not allowed to replace by self.
Bicycle light function description:
1. Remote Control: A total of 3 buttons, each button is equipped with an
1 The left turn key: Press the left turn button ,the button indicator flashes, and the rear left turn indicator flashes, and then press the button to turn off the indicator light.
2 Right turn key: Press the right turn button, the button indicator flashes, and the rear right turn indicator flashes, and then press the button to turn off the indicator light.
3 LED light key: press the LED button, the button indicator is always on ,and the red light in the tail lamp is always on .Press the LED button again, the button light flashes, and the red light in the rear light blinks. Press the LED button for the third time, and turn off the red light on the tail light.
2. Tail lights: a switch button, red LED warning light, yellow LED indicator light.
What include
1X Rechargeable Rear light
Package Type:
A=1X Bike Headlight only
1X USB Cable
B=1x Bike Headlight
1x 5LED Tailight
1x USB Cable
C=1x Bike Headlight
1x Laser Tailight
1x USB Cable
D=1x Bike Headlight
1x Remote Control Drection Tailight
1x USB Cable