THINKCAR THINKTOOL Obd2 Automotive Scanner All System Professional ECU Coding Active Test IMMO A/F 30 Reset Car Diagnostic Tools
THINKTOOL Advantages
1. All-In-One This pro-level diagnostic scanner combines the advanced ECU Coding,Active Test, TPMS Programming,into one solution, For the cost you’ll get a lot of value.You don't need buy second scanner in the next ten years.
2. Full system diagnose with 28 kinds Service Functions Electrical Throttle Relearn | Immobilizer/Keys | Inject Coding | Reset AFS | Reset Brake | Reset Oil | Reset SAS | Reset Bleeding etc...
3. Bi-Directional Control / Active Test Enjoy the easy operation to transmit control commands to operate the vehicle systems, without using the vehicle's controls, to verify system input and output such as: turn on the radiator fan, open & close windows and more.
4. TPMS Programming, Active, Learning
5. Printer Accessories as a free gift. You can customized the report tile address, very convenient and efficient. the device also support other accessories, such as WORKLIGHT, THEMAL IMAGER , VIDEO SCOPE. if you need these , please contact us.
6. Lifetime technical support,5 Year Quality Warranty.
Think Tool Feature:
1.Full System Diagnostic
2.28 Hot Servive
3.1 Year Free Update
All System System
ABS System TPMS System Engine System SAS System TPMS System IMMO System Battery System Oil Service System SRS System DPF System Air Conditioning System Transmission System ect...stem Diagnostic
Basic Functions
Read Codes Erase Codes Live Data Freeze Frame O2 Sensor Test On-board Monitor Test Vehicle Information Evap System
Thinktool MINI 16 Special Service Function:
The Thinktool Mini supports 28 commonly used special reset functions, allowing you to quickly access the vehicle system for various scheduled services, maintenance and reset performance, eliminating the need to reset the car after solving common problems Troubles.Listed some commonly used special reset services for your reference:
1.Oil Lamp Reset Service
Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.
2.EPB Electronic Park Brake Reset
It is important in the maintenance of electronic braking system's safety and efficiency.
3.BAT battery service
Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
4.DPF Diesel Particulate Filter Reset
Specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.
5.SAS Steering Angel Sensor Reset
Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.
6.TPMS Tire Pressure Monitoring System Reset
Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
7.IMMO Key Programming
The unique car key programming and read pin code function, it is mainly used to disable the lost vehicle keys and program a new replacement key fob.
8.ABS Bleeding
ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system.
9.Sunroof Reset
The sunroof needs to be reset when the sunroof control unit have communication problem or changed.
10.Suspension Reset
Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off.
11.Gearbox (Transmission )Reset
Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.
12.AFS Headlamp Reset
'AFS' means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels either side, pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel.
13.Injector Coding
Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.
14.Throttle Adaptation
The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair.
15.Gear Learning
The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.
16.EGR Reset
Reduce nitrogen oxides (NOx) in the exhaust gas and improve fuel economy at partial load.
17.A/F Reset
This function is applied to set or learn Air/Fuel ratio parameters.
18.Adblue Reset(Diesel Engine Exhaust Gas Filter)
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required.
19.Airbag Reset
This function resets the airbag data to clear the airbag collision fault indicator.
20.Coolant Bleeding
Use this function to activate the electronic water pump before venting the cooling system.
21.AT Learning
This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift
22.Language Change
This function is used to change the system language of the vehicle central control panel.
23.Nox Sensor Reset
Nox sensor is a sensor used to detect the content of nitrogen oxides (Nox) in engine exhaust. lf the Nox fault is re-initialized and the Nox catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine Ecu.
24.ODO Reset
a) ODO reset is to copy,write, or rewrite the value of kilometers in the chip of odometer by using a car diagnostic computer and data cable, so that the odometer shows the actual mileage. b)Usually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure, it is necessary to do ODO reset after maintenance.
25.Stop/Start Reset
This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware).
26.Seat Calibration
This function is applied to match the seats with memory function that are replaced and repaired.
27.Transport Mode
ln order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc.At this time, the transport mode needs to be deactivated to restore the vehicle to normal.
28.Windows Calibration
This feature is designed to perform door window matching to recover ECU initial memory, and recover the automatic ascending and descending function of power window.
Thinktool supports languages:
English, German, Spanish, French, Italian, Japanese, Portuguese, Russian, Polish, Turkish, Dutch, Hungarian, Traditional Chinese, Korean, Greek, Slovak, Romanian, Arabic, Croatian, Slovenian, Finnish, Czech
Support more than 220+ Car Brands:
For ASTONMARTIN ;For AUDI ;For BENZ ;For BMW ;For CHRYSLER ;For CITROEN ;For DAEWOO ;For FERRARI ;For FIAT ;For GM ;For HONDA ;For HYUNDAI ;For JPISUZU ;For KIA ;For LANDROVER ;For MASERATI ;For MAZDA ;For MITSUBISHI ;For NISSAN ;For OPEL ;For PEUGEOT ;For PORSCHE ;For RENAULT ;For ROVER ;For SAAB ;For SEAT ;For SGM ;For SKODA ;For SMART ;For SPRINTER ;For SSANGYONG For SUBARU ;For SUZUKI ;For TOYOTA ;For USA FORD ;For VOLVO ;For VW ;More...
Thinktool mini supports OBD II (on-board diagnostics) protocols.
Mode 01---Request current powertrain diagnostic data. Mode 02—Request freeze frame information. Mode 03—Request emissions-related diagnostic code . Mode 04—Clear/reset emissions-related diagnostic information. Mode 05—Request oxygen sensor monitoring test results. Mode 06—Request on-board monitoring test results for specific monitored systems. Mode 07—Request emission-related diagnostic trouble codes detected during current or last completed driving cycle. Mode 08—Request control of on-board system, test or component. Mode 09—Request vehicle information. Mode 0A—Request emissions-related diagnostic trouble codes with permanent status after a clear/reset emission-related diagnostic information.
Automatic VIN Recognition
Identities cars quickly and easily with one-key VIN reading.
Product introduction and product parameters
Operating System: Android 7.0 RAM: 32G LCD: 5.99 inch LCD Resolution: 1920*1200 IPS Touch Screen Camera:800 megapixel Connection Method: Wi-Fi Bluetooth: Supported Working Temperature: 0 ~ ℃ 45℃ Storage Temperature: -20 ~ ℃ 70℃
1*OBD2 diagnose cable 1* USB cable 1* User's manual 1*US plug 1*THINKTOOL Tablet Scanner 1*Plastic box 1*OBD Adapter set
|