Adjustable Range: 5-20mm/0.2"-0.8"

1 x Adjustable Tape Binding Presser Foot

Sewing both sides of the same effect with a special presser foot after curling can be placed in a cloth and keep edging.

1. Fit the presser bar into the slit and firmly tighten the presser foot screw.

2. Turn the guide adjustment screw away from the user in a direction to increase the guide width.

3. Insert the tape from the corner and turn it in a direction to place it in position.

4. Turn the guide adjustment screw toward the user in a direction to narrow the tape.

5. Loosen the stitch position adjustment screw and adjust the position of the tape guide to place the cloth in position for being stitched.

--After the tape guide is in position, tighten the stitch position adjustment screw.

6. Hold the tape and the cloth by both hands, and start stitching slowly at the beginning.

Our presser foot is not fit for the slant shank machine and the high shank machine.

Details information, you can refer to the picture, it will helps you to determine what is your machine shank size.