Specifications
Main material: ABS
Color: Black + Orange
Size: about 230x140x120mm/9.06x5.51x4.72in
Net weight: 1200g
Maximum inflation pressure: 16psi
Voltage: 12V
Inflatable hose length: about 110cm/43.31in
Power cord length: about 300cm/118.11in
Air flow: 70L/min
Power supply type: Car DC power supply
Application: Inflatable products such as inflatable beds, inflatable boats, swimming rings, inflatable paddles, inflatable pools, etc.
Product Description
12V Car Electric Air Pump 16psi Outdoor Kayak Paddle Board Airbed Boat Swimming Pool High Pressure LCD Digital Display Inflator
Feature:
1. 6 replaceable gas nozzles, suitable for filling most surfboards, rubber boats, inflatable boats, inflatable beds, inflatable pools and other inflatable products used on water.
2. Segmented inflation: the first stage is inflated quickly, and when it is full, it automatically switches to the second stage of high-pressure inflation until a certain PSI is sufficient.
3. The inflation pressure value can be preset: a safe and intelligent pressure system. When the pressure reaches the preset pressure value, the inflation pump will automatically stop inflation.
4. High-definition digital LCD display: accurate display of air pressure value, real-time understanding of air pressure.
5. Split design: Removable inflatable/pumping tube, easy to store, easy to assemble and easy to carry.
Specification:
Main material: ABS
Color: Black + Orange
Size: about 230x140x120mm/9.06x5.51x4.72in
Net weight: 1200g
Maximum inflation pressure: 16psi
Voltage: 12V
Inflatable hose length: about 110cm/43.31in
Power cord length: about 300cm/118.11in
Air flow: 70L/min
Power supply type: Car DC power supply
Application: Inflatable products such as inflatable beds, inflatable boats, swimming rings, inflatable paddles, inflatable pools, etc.
Precautions for use:
1. The power supply used must be a 12V DC power supply.
2. Do not block the air inlet at the bottom of the air pump to ensure that the air inlet is kept smooth at all times.
3. When the hose is damaged, do not operate this product, please replace the hose immediately.
4. Please do not pull out the hose when inflating, high air pressure may hurt the body.
5. Do not allow the air pump to work continuously for more than 15 minutes. Overheating of the motor may cause internal damage. After the air pump has been continuously working for 15 minutes, fully cool for 30 minutes. It is forbidden to use under high temperature exposure!
6. If any parts are damaged, please do not use this air pump, please contact a professional for repair.
7. This product should not be exposed to rain or immersion in water.
8. In order to avoid danger, the air pump should not be aimed at the face or body when working.
9. Please do not leave when inflating.
10. Please start the car when using the product to avoid unnecessary damage.
Note:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3cm measuring deviation due to manual measurement.
Feature:
1. 6 replaceable gas nozzles, suitable for filling most surfboards, rubber boats, inflatable boats, inflatable beds, inflatable pools and other inflatable products used on water.
2. Segmented inflation: the first stage is inflated quickly, and when it is full, it automatically switches to the second stage of high-pressure inflation until a certain PSI is sufficient.
3. The inflation pressure value can be preset: a safe and intelligent pressure system. When the pressure reaches the preset pressure value, the inflation pump will automatically stop inflation.
4. High-definition digital LCD display: accurate display of air pressure value, real-time understanding of air pressure.
5. Split design: Removable inflatable/pumping tube, easy to store, easy to assemble and easy to carry.
Specification:
Main material: ABS
Color: Black + Orange
Size: about 230x140x120mm/9.06x5.51x4.72in
Net weight: 1200g
Maximum inflation pressure: 16psi
Voltage: 12V
Inflatable hose length: about 110cm/43.31in
Power cord length: about 300cm/118.11in
Air flow: 70L/min
Power supply type: Car DC power supply
Application: Inflatable products such as inflatable beds, inflatable boats, swimming rings, inflatable paddles, inflatable pools, etc.
Precautions for use:
1. The power supply used must be a 12V DC power supply.
2. Do not block the air inlet at the bottom of the air pump to ensure that the air inlet is kept smooth at all times.
3. When the hose is damaged, do not operate this product, please replace the hose immediately.
4. Please do not pull out the hose when inflating, high air pressure may hurt the body.
5. Do not allow the air pump to work continuously for more than 15 minutes. Overheating of the motor may cause internal damage. After the air pump has been continuously working for 15 minutes, fully cool for 30 minutes. It is forbidden to use under high temperature exposure!
6. If any parts are damaged, please do not use this air pump, please contact a professional for repair.
7. This product should not be exposed to rain or immersion in water.
8. In order to avoid danger, the air pump should not be aimed at the face or body when working.
9. Please do not leave when inflating.
10. Please start the car when using the product to avoid unnecessary damage.
Note:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3cm measuring deviation due to manual measurement.
Included
1 X Electric Air Pump
1 X Multi-nozzle Conversion Head
1 X Multi-nozzle Conversion Head
Pictures