Double Flash Light Switch Special Hazard Warning Light Lossless Wire Harness

▶Product name:
Modified double flasher [front rear 4 turn lights can flash at the same time]
Turning lights are preferred, no need to replace the original car switch, in-line installation.
Installation: Find the original turn signal switch plug, separate the original plug, and then connect the plug of the product with the original plug.
Easy to install without modification. Connect directly to the plug. No wiring required.

▶Fitment:
For KAWASAKI Z400 Z250

▶Features:
Double flashes refer to the front and rear direction lights flashing at the same time, playing a warning role. It is a necessary product for night driving, formation travel, rain and fog driving.

Double flash: Four turning lights are flashing at the same time. Use in the evening, rainy day, wind dust, wind and snow, foggy day, group riding or parking to improve safety.

▶5 flash switching methods:
Turn on the unilateral steering switch and then turn off the switch, recorded as 1 time;
Repeat four times quickly to switch 1 double flash mode
After switching the double flash mode, it comes with a memory function

▶Note:
In any mode, turn on the turn signal, turn signal priority

▶The sequence of the 5 double flash modes is as follows:
1. Left flash followed by right flash
2. Flash together left and right
3. Alternate left and right flashes
4. The breathing light flashes
5. Ordinary double flash

▶How to turn on or off the double flash mode:
1. Turn on the double-flash mode: quickly turn on the turn signal switch (turn left or right switch is acceptable), and then turn off the turn signal switch immediately, the faster the better (Note: no more than 2 seconds. If it exceeds 2 seconds, it will be invalid ).
2. Turn off the double flash mode: quickly turn on the turn signal switch, and then immediately turn off he turn signal light switch. (Note: The operation of opening and closing is the same).
3. Normal steering will not turn on or off the double flash mode (Note: It must take more than 2 seconds to turn a normal turn, so it will not interfere with each other)
If you don't need to turn on the double flash, just turn the light for 3 seconds and then press to turn off the turn light to turn off normally, and the double flash will not turn on. Double flashing on the instrument light will also flash.

If you have any questions, please contact us, we will try our best to solve it for you, thank you.