KYORITSU Digital Multimeter KEWMATE 2001A New reinforced protective bush Japan

Pattern (type): Single item product introduction Pocket size DMM with clamp

・ With new reinforced protective bush

・ Open core type clamp sensor can measure AC / DC current up to 100A

・ Covered Measurable conductor diameter approx. Φ10mm

・ Display with 3400 count bar graph

・ Pocket size for convenient storage

・ Impact-resistant holster case

・ Minimum resolution AC / DC 0.1A

・ Tip pin length 18mm



◆ Measurement range ・ Accuracy ・ General specifications

[DC voltage] 340.0mV / 3.400 / 34.00 / 340.0 / 600V (input impedance: 10MΩ) ± 1.5% rdg ± 4dgt

[AC voltage] 3.400 / 34.00 / 340.0 / 600V (input impedance: 10MΩ) ± 1.5% rdg ± 5dgt (50 ~ 400Hz)

[DC current] 100.0A ± 2% rdg ± 5dgt

[Direct current] 100.0A ± 2% rdg ± 5dgt (50 / 60Hz)

[Competition] 340.0Ω / 3.400 / 34.00 / 340.0kΩ / 3.400 / 34.00MΩ

_____ ± 1% rdg ± 3dgt (0 ~ 340.0kΩ)

_____ ± 5% rdg ± 5dgt (3.400MΩ)

_____ ± 15% rdg ± 5dgt (34.00MΩ)

[Induction ] Buzzer sounds at 30 ± 10Ω or less

[Frequency] (Current) 3.400 / 10.00kHz ± 0.1% rdg ± 1dgt

_____ (Voltage) 3.400 / 34.00 / 300.0kHz ± 0.1% rdg ± 1dgt

_____ (Input sensitivity current: 25A / voltage: 30V or more)

[Conductor diameter to be measured] Maximum φ10mm

[Compliant standard] IEC 61010-1 (JIS C 1010-1) CAT III 300V, CAT II 600V Contamination degree 2

______ IEC 61010-031 (JIS C 1010-31)

______ IEC 61010-2-032 (JIS C 1010-2-32)

______ IEC 61326-1 (EMC) )

[Battery used] AAA dry battery R03 (1.5V) x 2 * Continuous use time approx. 45 hours (auto power save approx. 10 minutes)

[ External dimensions] 128 (L) x 91 (W) x 27 (D) mm

[Quality] Approx. 220 g (including batteries)

[Accessories] AAA batteries R03 (1.5V) x 2, Instruction Manual

Condition:New