No. |
Item |
Value |
NO. |
Item |
Value |
1 |
Type |
Awl |
6 |
Charging time | 3 hours |
2 |
Speed |
0-15000rpm |
7 |
Input voltage | 110-240V 50-60HZ |
3 |
Noise |
≤75dB |
8 |
Power Source |
Electricity |
4 |
Operation(V) voltage |
14.4V |
9 | Swing | 4.5 |
5 |
Sterilization temperature |
135℃ |
10 |
Battery capacity |
1600mAh |
No. |
Accessory list |
Quantity/pcs |
1 |
Handpiece |
1 |
2 |
Battery |
2 |
3 |
Charger |
1 |
4 |
The blades |
2 |
5 |
The key |
1 |
6 |
Sterilizing channel |
1 |
7 |
Aluminum alloy case |
1 |
8 | Operating manual |
1 |
1. Sterilize temperature ≤ 135 °C (Improved type ≤155 °C), if the temperature is over 135 °C, the motor will be damaged.
2. Normal bone drill can only hold drill bits less than 6mm,acetabulum reaming drill with big torque, rpm is around 300, canulate drill is used with nail or K wire, rpm is around 600.
3. The battery need to be get out of the power tool after surgery. Otherwise the small automatic discharge of the electric will make the life of the battery short.
4. The battery cannot be sterilized, it is not autoclavable.
5. The cranial bur must be washed right after the surgery by purger in order to avoid the blood stick in the bur, then we should make it dry.
6. The battery space in the handpiece of the tool should not have any water after sterilization.
7. The cranial bur blade is made of medical stainless steel,in order to avoid broken,so it is flexible and not very hard, it is easy to be attrite,we suggest each blade only use for 1 surgery.