Direct Replacement: This tire pressure monitoring system (TPMS) sensor is designed to match the fit and function of the original sensor on specified vehicles
Ideal Solution: This sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction
Durable Construction: This sensor is made from quality components to ensure reliable performance and a long service life
Trustworthy Quality: Backed by team of product experts and extensive automotive experience
Installation of TPMS is recommended to be performed only by trained professionals.
Specification:
Battery Life: ≥3 years(Normal Use)
Activation Type: Pressure Drop
Housing Material: Plastic
Mounting Location: Wheel Valve Stem Hole
Mounting Method: Clamp-In
Operating Temperature: -40°C ~ +120°C
Storage Temperature: -40°C ~ +120°C
Operating Humidity: ≤90%
Operating Frequency: 315 MHz
Pressure Monitoring Range: 100 – 900kPa
Pressure Reading Accuracy: ±10kPa
Temperature Reading Range: -40°C ~ +120°C
Temperature Reading Accuracy: ±5°C G
Sensor Reading Accuracy: ±15%
Transmission Power: 5 - 8dBm
Working Voltage: 2.6V - 3.6V
Function: Leakage Alarm; High / Low Tire Pressure Alarm; High Tire Temperature Alarm
Loosen the tire: Remove the valve cap and core and deflate the tire.
Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.