Item includes: (will come diagram/specs included with the packing slip)
1pcs – UV Lamp 254nm U-Shape 150mm x 10mm x 150mm w/attached harness & connector
1pcs – 12V DC Single Lamp Inverter
1pcs – Low Voltage wire 100mm length
Lamp Specifications (see pictures for complete specs):
Starting Voltage: 450V
Maintaining Voltage:300V
Lamp Current: approx 7.0mA
Typical Life Hours: min 5,000
Discharge stabilization time: 3 minutes
CAUTION!
SAFETY CONCERNS:
·
Although the
amount of UV and Ozone generation is very small, we recommend all suitable
precaution to avoid eyes or skin exposure to UV radiation. It can produce
serious damage to the eye, which may lead to temporary or permanent vision impairment.
For this reason, the light produced by a this lamp must be carefully
shielded against both direct viewing and reflections and dispersed light that
might be viewed.
·
Do not touch the
glass/quartz with the bare hands. Rubber gloves are recommended.
·
Use appropriate
protection, wires and insulated materials to avoid surge voltage from the lamp
leads. Do not touch plug with wet hands.
·
Discard the lamps
in accordance with safety code requirements for materials containing Mercury.
·
When Lamp in use we recommend an adequate ventilation.
·
Take also all
suitable requirements recommended by the government safety code to avoid a prolong
inhalation of Ozone generated by lamp.
·
The operation
risk is in Group 1 per ANSI / ESNA PR27.3-96.
·
This lamp should
not be used for cosmetic treatments, therapeutic or diagnostic purpose.
·
This product is
not a toy. Use and store out of reach of children
·
Intended for
indoor use only. Do not use the ballast and lamp in wet or dump conditions.
·
Do not expose lamp and ballast to weather
elements.