Chevrolet Avalanche 1500 2002-2006 Chevrolet Avalanche 2007-2013 Chevrolet C2500 1988-2000 Chevrolet Express 1500 1997-2014 Chevrolet K1500 1988-1999 Chevrolet K1500 Suburban 1992-1999 Chevrolet K2500 1988-2000 Chevrolet Silverado 1500 1999-2018 Chevrolet Suburban 1500 2000-2014 Chevrolet Tahoe 1995-2014
STEP. Check 3 specifications The following is the easy and simple way to check the bolt pattern/PCD, center/hub bore and thread pitch. If you donot sure, please just message us with the year, make and model of vehicle.
1). Check Vehicle Bolt Pattern/PCD For 4-lug, 6-lug, 8-lug, measure the segment from the CENTER of a bolt hole TO the CENTER of another hole. 5 lug is different, you need to measure the back of the hole to the center of the second bolt hole (not center point).(See Bolt Pattern Diagram below)
2). Check Vehicle Hub/Center Bore Size Measure the diam of the center bore on hub, make sure the spacer's diam is equal to or bigger than the axle diameter.
3). Check Vehicle Thread Pitch There are different types of studs, such as M12x1.25, M14x1.5, M12x1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.
How to install the wheel spacers:
1). IMPORTANT - ADAPTER OR SPACER MUST SIT FLUSH AGAINST VEHICLE HUB, AND WHEEL MUST SIT FLUSH AGAINST ADAPTER OR SPACER! Stock studs must be trimmed down (shortened) if they protrude past the surface of the adapter or spacer. If not, vibration or other problems can occur. Some wheels have pockets that may allow for no stud trimming. If not, studs MUST be trimmed.
2). Make sure the mounting surface (vehicle hub) is clean and flat, and remove all retaining clips.
3). Install the adapter to the vehicle, with the proper lug nuts, and torque to manufacturer’s wheel torque specs.
4). Install the wheel to the adapter by torquing to the vehicle manufacturer’s wheel torque specifications (again, max 140 ft-lbs). Please assure the proper thread engagement (6 to 8 full turns) on lug nuts or bolts.
5). Drive the vehicle. If no problems (noise, vibration, anything out of the ordinary), drive about 5 miles, then re-torque the lug nuts attaching the spacer or adapter to the hub.
Item Specifics
Universal Fitment
No
Items Included
4pcs-6x5.5-wheel spacer
Hub Bore
108mm
OE/OEM Part Number
2-6x5.5-14x1.5-108 -wheel spacer
Type
Wheel Spacer
Finish
CNC Machined Polished Aluminum Finish
Thickness
2'', 2 Inch, 50mm
Wheel Bolt Pattern
6x5.5/ 6x139.7mm
Vehicle Bolt Pattern
6x5.5/ 6x139.7mm
Surface Finish
High-Strength 6061-T6 Billet Aluminum
Manufacturer Part Number
Does Not Apply
Adapter Stud Size
14x1.5
Placement on Vehicle
Left,Right,Front,Rear
Stud Grade
10.9
Color
Black
Brand
KYX
Manufacturer Warranty
5 year
Lug Patterns
6 Lugs
Features
Easy Installation
Interchange Part Number
2000 2002 2005 2006 2008 2015 Chevrolet Silverado 1500
Payment
1. We accept payment via PAYPAL only.
2. eCHECK from PayPal will only be processed once the payment clears.
3. Payment must be made within 4 days of auction closing.
4. Total amount due includes the final auction price plus Shipping & Handling.
5. Shipping & Handling will be determined based upon the SHIP TO address.
Shipping
1. Order will be usually shipped out the same or next business days once the payment is made and cleared.
2. Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
3.If you have not received your shipment within 30 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
4.Shipping charges do not include custom & brokerage fees, buyers responsible for all custom and brokerage fees.
Returns
1. We only accept refund request for un-opened or un-used item, buyer has to return item in original condition and retail package within 30 day for refund(item price minus 20% restock fee). The shipping charge is not refundable. Refund will be processed after we received return.
2. You have 7 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
3.All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and your eBay ID.
Contact Us
If you have any question or concern about your order, please feel free to contact us.
We will strive to providing the greatest service and bringing the highest satisfaction to all of our customers.
Feeback
1.We appreciate your business and strived to improve our customer service and our commitment to quality.
2.We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do.
3.If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, and we will be glad to work with you to have it resolved.
STEP. Check 3 specifications The following is the easy and simple way to check the bolt pattern/PCD, center/hub bore and thread pitch. If you donot sure, please just message us with the year, make and model of vehicle.
1). Check Vehicle Bolt Pattern/PCD For 4-lug, 6-lug, 8-lug, measure the segment from the CENTER of a bolt hole TO the CENTER of another hole. 5 lug is different, you need to measure the back of the hole to the center of the second bolt hole (not center point).(See Bolt Pattern Diagram below)
2). Check Vehicle Hub/Center Bore Size Measure the diam of the center bore on hub, make sure the spacer's diam is equal to or bigger than the axle diameter.
3). Check Vehicle Thread Pitch There are different types of studs, such as M12x1.25, M14x1.5, M12x1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.
How to install the wheel spacers:
1). IMPORTANT - ADAPTER OR SPACER MUST SIT FLUSH AGAINST VEHICLE HUB, AND WHEEL MUST SIT FLUSH AGAINST ADAPTER OR SPACER! Stock studs must be trimmed down (shortened) if they protrude past the surface of the adapter or spacer. If not, vibration or other problems can occur. Some wheels have pockets that may allow for no stud trimming. If not, studs MUST be trimmed.
2). Make sure the mounting surface (vehicle hub) is clean and For flat, and remove all retaining clips.
3). Install the adapter to the vehicle, with the proper lug nuts, and torque to manufacturer’s wheel torque specs.
4). Install the wheel to the adapter by torquing to the vehicle manufacturer’s wheel torque specifications (again, max 140 ft-lbs). Please assure the proper thread engagement (6 to 8 full turns) on lug nuts or bolts.
5). Drive the vehicle. If no problems (noise, vibration, anything out of the ordinary), drive about 5 miles, then re-torque the lug nuts attaching the spacer or adapter to the hub.
Important Notes: Please make sure that these are the correct application for your vehicle. And confirm the PCD parameters of wheel spacers are consistent with the item parameters.We do not guarantee any fitment onto any vehicle,we only guarantee that you will receive the item described as the above. Returns are only accepted if unused and not installed.(Returns ARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)
Installation by a trained professional is highly recommended. Please verify this is the correct application for your vehicle before ordering, we only guarantee you receive what is described above. Some vehicles may require modifications to make this type of adapter work properly. Be aware that the studs on the vehicle cannot stick out past the face of the back adapter plate, you may need to modify them by grinding/cutting/trimming.
We make no promise or guarantee that this item is compatible with your vehicle and/or wheels. Vehicle compatibility, if listed, is used to match the vehicle bolt pattern with the adapter only. The adapters must be installed correctly, Lug Nut Guys or the manufacturer cannot be held responsible for improper installation causing failure. Please ask if you have any questions, we're here to help!
1. We accept payment via PAYPAL only.
2. eCHECK from PayPal will only be processed once the payment clears.
3. Payment must be made within 4 days of auction closing.
4. Total amount due includes the final auction price plus Shipping & Handling.
5. Shipping & Handling will be determined based upon the SHIP TO address.
1. Order will be usually shipped out the same or next business days once the payment is made and cleared.
2. Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
3.If you have not received your shipment within 30 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
4.Shipping charges do not include custom & brokerage fees, buyers responsible for all custom and brokerage fees.
1: Contact seller first by email
2: Send images : including outer package & scan label & item itself & with complete accessories etc necessary condition: one : Items have not been used. two : Outer package without any damage.
3: For returns, please contact customer service for a return shipping label.
4: Item delivered -payment repay
1. Returns or exchanges will be subject to a 15% restocking fee on the original purchase.
2. Returns or exchanges due to shipping issues will be borne by the seller
Priority: In the following cases, the shipping cost will be undertake by buyers 1: Order accidently 2: Find better price 3: Change mind
Notice: Accessory missing/ quality issue/ shipping damage.etc Please contact us for good solution first instead of opening return dispute. Our professional customer service team can give you a satisfactory solution!
If you have any question or concern about your order, please feel free to contact us.
We will strive to providing the greatest service and bringing the highest satisfaction to all of our customers.
1.We appreciate your business and strived to improve our customer service and our commitment to quality.
2.We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do.
3.If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, and we will be glad to work with you to have it resolved.