Since most printer owners unable to determine when is time to replace drum,

manufacturer programmed printer to stop after drum made 45,000 rotations (approximately 12,000-15,000 pages)

Depending on many conditions, such as humidity, temperature, paper quality, character of the print job - drum may last approximately from 30,000 to 90,000 rotations. 

(if you mostly print one page at a time - drum will last even shorter because during warming up and color calibration the drum rotates many times!)

Green organic coating on the drum has a limited life of about 60,000 cycles print quality will gradually decrease: streaks, shaded or light print - it is time to replace or rebuild drum.

  You may use this kit to rebuild worn out drum if the old

drum was working before "ORDER X DRUM" or “X DRUM LIFE” ("replace drum") message appeared,

After rebuilding, put rebuilt drum back in the printer,

printer will recognize such drum as new, "replace drum" message will be cleared and you may get up to 15,000 more pages.

This kit include:

 a. New green cylinder,

b. new OEM FA fuse

c. photo illustrated instructions.

Installation of these kits require partial drum disassembly,  fine dexterity and mechanical skills are required.

Replacement of the green cylinder requires fine mechanical skills (detailed illustrated instructions included) and takes about 30 minutes.

If you don't feel comfortable taking drum apart, we have new OEM drums available in our eBay store

Developed for Oki ® C3200 and C5100, C5150, C5200, C5300, C5400, c5500, c5800, c6000, c6150 series printers, and extensively tested

This is for one kit, to rebuild any color drum: Yellow, Magenta, Cyan or Black. 

It is 100% compatible with any drum cartridge in your Okidata ® C3200, C3200n, C5100n, C5150n C5200n, C5300n, C5400n, C5400tn, C5400dtn C5500, C5800, C6000, C6100c, C6150 printer

 Please note: pictured drum body not included - rebuilding kit only: new Cylinder and Fuse (see picture 2) for drum as on picture 1!



Reduce waste! Works with any color Drum cartridge: Yellow, Magenta, Cyan or Black. This is high quality 100% compatible new cylinder to rebuild worn or damaged drum cartridge of your Okidata ® C3200, C3200n, C5100n, C5150n, C5200n, C5300n, C5400n, C5400tn, C5400dtn color printer. These new aluminum cylinders and OEM fuses will last as long as original in your cartridges, drum life will be set to 100%. It takes about 30 minutes to install and test this kit. You must have good mechanical skills to do this job.

  Spend 1/2 hr and get up to 100% more life out of used drum you already have ! 

Please contact seller if you should have any questions.

Free tech support by e-mail ! 

To install Phillips and small Flathead screwdrivers are required, color photo illustrated instructions included.

Please note: used drum you have must be in good mechanical working condition prior message "order drum" or "replace drum" appeared. 

What feedback my buyers posted?

"WOW this product works!! I'll keep buying from this ebayer!!!"

Worked BETTER than expected!! Will definitely use again! Thanks  A+++

I Thank You for saving me so much money, Will return!

Thanks! I'll be buying more in the future.

Thanks for reading!