MADE IN THE USA
The "HOW TO" process is so simple... virtually anyone can do it!
It's like making a cake! But no oven is needed!
HERE'S HOW...
1. Lubricate the molds... a light vegetable oil will do if you don't have mold release.
2. Mix a bag of pre-mix concrete… get a shovel, water, and something to mix it in.
3. Add some concrete color, which is optional… unless you want just plain gray.
4. Pour mix into molds… vibrate a bit to compact concrete and release air bubbles.
5. Let the filled molds sit a day or so, undisturbed… over-night is fine.
6. Carefully flip the molds over the next day… and pop out what you’ve created from the mold!
That is obviously a simplified version of the process, but it is that easy. And FREE instructions and email support are included with each purchase.
THE BEAUTIFUL STONE SHOWN IN THE PHOTOS CAN BE DUPLICATED WITH STONE MADE BY YOU... IN ANY COLOR YOU WANT... EVEN IF YOU HAVE NO PREVIOUS EXPERIENCE MAKING STONE!
THIS LISTING IS FOR TWO SETS TOTALING 35 MOULDS...
OUR #ODF-02 AND #ODF-05 DRYSTACK STACKSTONE SET OF 35 MOLDS.
WE ALSO OFFER TWO DIFFERENT SHEETS WITH 12 MOLDS ON EACH SHEET, AND ANOTHER SHEET IN THIS STYLE WHICH ARE SIMILAR BUT CONTAINS 13 DIFFERENT SHAPES AND SIZES OF THIS STYLE OF STONES. EACH SHEET IN THE SET IS THE SAME PRICE. IF YOU HAVE A LARGER PROJECT, AND/OR WANT MORE MOLDS OF DIFFERENT SHAPES AND SIZES, VIEW OUR 72 MOLD EBAY LISTING IN OUR EBAY STORE... SAVE MONEY ON THE ENTIRE SET OF FIVE SHEETS OF 72 MOLDS. OUR DRYSTACK LEDGESTONE STYLE BLENDS VERY WELL WITH THESE SETS AS WELL.
EACH SHEET, OR SET OF MOLDS WILL COVER ABOUT 3 SQUARE FEET WITHOUT ANY DUPLICATION, DEPENDING ON SPACING. THE 72 MOLD SET COVERS ABOUT 15+ SQUARE FEET. EACH MOLD IS ABOUT 2" DEEP, WITH THE HEIGHTS AND WIDTHS VARYING DEPENDING ON THE ORIGINAL STONE THAT THE MOLD WAS MADE FROM. PHOTO #2 IS OF THE MASTER BOARD THAT THE MOLDS WERE ACTUALLY MADE FROM. THE PHOTO OF THE WALL HAS ADDITIONAL LARGER STONES AND SOME LEDGESTONE ADDED IN FOR INTEREST BY THE DESIGNER. THESE ARE NOT PART OF THE STONE SET YOU ARE PURCHASING. SIMILAR SQUARE AND RECTANGULAR STONES ARE AVAILABLE IN OUR CASTLESTONE, LEDGESTONE, AND LIMESTONE STYLES OF STONE MOLDS.
PLEASE NOTE: The stones in the photo of the solid Stackstone wall are very tight to each other due to slightly cutting or grinding down the sides to make them more flush with each other. The stones made with these molds will have a slightly larger spacing due to the side angle... as much as 1/4" between each stone. This is so the stones can be de-molded easier, and so they will blend with the Drystack Ledgestone sets of stones in a mixed wall. If you desire very tight layers of stone, you may want to grind the sides down a bit to achieve this. This can be done easily with a composite masonry blade in a circular saw, or trim them with a wet saw to get them to fit tighter. This should only take a minute to do on each stone.
These sets of molds include the following sizes of molds, most of which will be cut into smaller combinations to make pouring easier. Some of the molds have been pre-joined together to make it easier to pour and fit during installation. They are nominally sizes: 2.25x6.5, 2x7.25, 2x6, 4x22.5, 1.5x9, 2x11.75, 2.25x9, 1x13.5, 2.25x15, 3.5x8.5, 2x4.5, 1.5x10.75, 1.25x5.75, 2.5x7, 1.75x11, 3.5x9, 1.25x5.75, 3.5x7.5 in Set #05 and there are 15 more in Set #02.
SAVE BIG $$$$ - MAKE STONE VENEER FOR AS LITTLE AS $0.45 A SQUARE FOOT OR LESS!
AND YOU CAN START PRODUCING STONE NEXT WEEK!
WHETHER YOU WANT THE FREEDOM AND INDEPENDENCE OF YOUR OWN BUSINESS... OR JUST WANT TO MAKE TILE, PAVERS, AND STONE FOR YOUR OWN USE... WE ARE THE SOURCE!
YOU ARE PURCHASING A SET OF THIRTY-FIVE MOLD CAVITIES AS ILLUSTRATED, ALL DIFFERENT,
"OLDE DRYSTACK FLAT-FACED" STACKSTONE CONCRETE MOLDS.
YOU CAN MAKE CUSTOM-COLORED, HEAVY, MEDIUM, OR LIGHT-WEIGHT STONE WITH THEM.
REMINDER... PURCHASE THE ENTIRE SET OF FIVE SHEETS... 72 MOLDS FOR ONLY $499.00 AND SAVE.
These molds can be used hundreds of times if cared for properly.
They are made with .060, high-impact, industrial rubberized ABS plastic for strength, durability, and flexibility.
Interested in starting your own business? Become an "Olde World Stone & Tile" Producer!
Since 1992, we've trained hundreds of entrepreneurs worldwide to start and succeed in their own tile, paver, and stone manufacturing businesses! Our main business is mold design and manufacturing, so our success is truly dependent on your success!
SEE OUR OTHER LISTINGS, OR VISIT OUR NEW STORE, FOR MORE MOLD STYLES AND SIZES, AND FOR MORE INFORMATION ABOUT OUR BUSINESS OPPORTUNITY PACKAGES.
For additional product information, tile and stone installation photos, and more... visit our extensive Oldeworld and TheMoldStore websites or if you have questions, feel free to email or phone us.