Remote Keyless Car Alarms Central Locking Car Accessories      
   

ALL our products are BRAND NEW

2 wire/Slave  Central Locking Door Motor  (Solenoid/actuator)   MOT-S

This door lock motor comes complete with locking rod, mounting bar, and all screws/fixings to do an installation yourself!
The motor can be added to any door and linked up to car alarm, remote starter system, or keyless entry system.  Can be used for many purposes, its main design function is to convert a manual door lock to an electrically operated one. The motor has two connections, which simply drive the motor (Green & Blue), just by connecting the Blue and Green wires (12v Pulse for lock, 12v pulse for unlock). Actuator travel is approx. 22mm.  The hole centres for the (supplied) mounting screws are 57mm apart. Remote Central Lock upgrade available!


 Features:

  • Universal 2 Wire Motor for Central Locking
  • Silent operation - Rotatable actuator head
  • All fittings included. (Includes Rod, Clamp, Screws & Brackets)
  • High Torque 12 Volt Motor
  • Excellent durability, reliability water resistance.
  • Installation Manual.
  • Quality Products at fantastic prices!

 Package Contents:
  • 1x Slave Door Motor (2 wires)
  • All necessary wires and fixtures Includes Rod, Clamp, Screws & Brackets (see picture below)
  • Installation Manual
Looking for a boot release or a solenoid for de-handled doors?
Then you want our Boot Release kit instead

 

2 wire Central Locking Door Motor -Solenoid -Actuator



 
 


Notes *
Note 1. Cable operated door locks
For vehicles with cable operated door locks, such as Ford, Mercedes  Sprinter/Vito, and some newer cars, You need this additional item:  Allows aftermarket actuators to work with cable door lock systems  Cable door lock adaptor
 
Note 2. Total Closure / Window Closure
If your vehicle has total closure this kit will close the windows without any additional interfaces.
You can tell if your vehicle has total closure if the windows close when you hold the drivers door key in the locked position.
If you don’t have total closure and want to close the windows when the alarm is armed;
then you will need a  window closure module.

Note 3. Boot Release Wire: Trunk  Release Output
Some cars have an electric boot release or one can be added. This can be  interfaced with this kit.
For cars with a built in boot release the wire is  found at the keyless entry module under the dash
or behind a kick panel. If  you want to Convert your manual boot release to electric release;
then you  will need a  Electric Boot Release Kit