Clean 6.5" Woofer or Mid Range Driver
6 ohms, 125 Watts RMS

Note, this listing is for a two speaker buy.
If you buy 1, you will get two speakers, a pair.

Nothing much is known about this speaker yet, other than the specifications. It is a new item that just came in, the dealer we bought them from believed they were made for Altec. I don't know about Altec Lansing, but do know that it is a very nice 6.5" driver.
I carry a lot of Polk Audio speakers, and candidly it looks to be made by the same Chinese speaker company. I base this on the overall look, quality of workmanship and sound, lets put it this way. I would not be surprised if it was the same company who makes Polk speaker components.

In testing I threw together a quick and dirty ported cabinet of about .5 cf., in a 2 way design crossed over at about 3 kHz. Then I ran some basic listening tests by ear.
I was pleased with the sound and response, this is a good sounding 6 1/2" driver. The response was uncolored and clean, the bass was there, it wasn't boomy and a bit more than you would expect for a 6 1/2" driver.

I envision this as a good driver for a small book shelf kit or as a clean sounding 6.5" component system in your car. I was very surprised at the thickness of the cone, I have seen 12" drivers with a cone this thick, but never a 6.5" driver this thick. The cone doesn't want to flex, so I can understand the clean sound this driver provides.

This particular speaker has got me thinking about my next speaker project. What my minds eye sees at this second, is a 2 way or 3 way, 6 woofer design tower project.
6 of the woofers wired in series parallel would make for a nice 8 ohm, 250 watt tower project.
I'm thinking of calling it the "Mavin 6 Pack." Look for the kit to show up in the next couple of months.

Specifications


• 1" voice coil
• Power handling 125 watts RMS
• Rubber Surround
• Extra Thick Paper Cone
• Magnetically Shielded
• 6 ohms ( great for 4 or 8 ohm applications )
• Depth = 3.125" ( 3 1/8" ) (78 mm )
• Frame Dia. = 6.5" ( 6 1/2" ) ( 165 mm )
• Mounting Hole Opening Size 5.85" ( 5 9/16" ) ( 142 mm )
• Weight = 3 pounds ( raw weight of the speaker, not packaged )
• 30 oz. magnet structure
• 4 mounting screws, spaced 6.190" a part on the diagonal center to center ( 6 3/16" ) ( 157 mm )
  The four mounting screw holes are 90 degrees to each other and spaced 4.435" a part on center. ( 4 7/16" ) ( 112 mm )
  
  
  T/S Specs
  
  
• f(s) = 37.68 Hz.
• Q(ms) = 6.781
• V(as) = 23.68 liters ( 0.836 cf. )
• n(0) = 0.28%
• M(ms) = 35.20 grams
• R(e) = 3.09 ohms
• Q(es) = 0.436
• SPL = 91 dB @ 1W/1m
• C(ms) = 0.51 mm/N
• Z(max) = 51.19 ohms
• Q(ts) = 0.409
• L(e) = 0.53 mH
• BL = 7.69

Shipping weight is 7 pounds

12 pieces per master carton, case weight is 38 pounds.