These blank keys (blade) is for Flip type OR fixed type remotes keys
Compatible with most remote keys transmitters
Package Contents:
1 x Blank key Blade - Please select your chosen blank key from options below
Remarks:
Simply take the blank to a Locksmith and have it cut. It can
be cut at any local hardware store, lock smith, or shop with key
cutting machine.
Please carefully check your original keys with the photos
shown.
These key blanks may be suitable for other car models, please
check the pictures below.
These keys without transponder.
IMPORTANT - You will need
to hold your existing key up the same way as our picture, and check to see
if your key has a the cut/groove on the same side as ours. Basically, if
your key looks the same as the key in our picture (regardless of which
number you have stamped on your existing key blade) it will be suitable
for your vehicle. We do not stamp these numbers on our key blades. The
same key maybe used for some other cars!. Note: The key
pattern shown "
" is the keyhole that the key goes into, not the
view from the tip of the key.
Please specify CODE BELOW at
the time of your order/payment
Note 1.
Cable operated door locks For vehicles with cable operated door locks, such as Ford, Mercedes
Sprinter/Vito, and some newer cars, You need this additional item: Allows aftermarket actuators to work with cable door lock systems
Cable door lock adaptor
Note 2. Total Closure / Window Closure If your vehicle has total closure this kit will close the windows without any additional interfaces.
You can tell if your vehicle has total closure if the windows close when you hold the drivers door key in the locked position.
If you don’t have total closure and want to close the windows when the alarm is armed; then you will need a
window closure module.
Note 3. Boot Release Wire: Trunk
Release Output Some cars have an electric boot release or one can be added. This can be
interfaced with this kit. For cars with a built in boot release the wire is
found at the keyless entry module under the dash or behind a kick panel. If
you want to Convert your manual boot release to electric release; then you
will need a
Electric Boot Release Kit