Messen- und Steuern per USB, Komplettset

  

Ein universelles Komplettset zum Messen, Steuern und Regeln mit dem PC. Die bewährte ProfiLab Expert-Software und ein das USB-Interface mit zwölf IO-Kanälen bilden eine solide Ausgangsbasis für den Einstieg in die PC-basierte Automatisierung.

  ... zum Kennenlernpreis... 

 

 

 (Anwendungsdemonstration)

 

  

ProfiLab Expert 4.0 /CD-ROM)

Mit der ProfiLab-Expert-Software entwickeln Sie umwerfend einfach Ihre eigenen digitalen oder analogen messtechnischen Projekte. Egal ob analoge Messungen, digitale Steuerungen oder eine Kombination aus alledem - alles was elektrisch zu regeln ist können Sie hiermit realisieren. Und das Beste: Sie brauchen keine einzige Zeile zu programmieren! Sie entwickeln Ihre Schaltung direkt am PC, fügen Schalter, Taster, Displays, etc. hinzu, und bauen sich so Schritt für Schritt Ihr eigenes Projekt auf.

 

 
 
 
Das μPIO / TEMP12 ist für den Betrieb von bis zu zwölf digitalen Temperatursensoren vom Typ Dallas DS18B20 ausgelegt. Die Werte der zwölf Kanäle werden per USB zum PC übertragen. Der Anschluss der Sensoren erfolgt über die Anschlussklemmen B0…B5 und C0…C5. An jeden dieser Kanäle kann EIN Temperatursensor angeschlossen werden. Freie Kanäle, die nicht für Temperatursensoren verwendet werden, können für alternative Aufgaben konfiguriert werden:
  • DS18B20 Temperatursensor
  • Digitaleingang
  • Digitalausgang
  • Alarmausgang
  • Sensoreingang (ADC) (nur C0…C5)
Die Konfiguration des Gerätes erfolgt mit Hilfe der mitgelieferten Software. Diese ermöglicht die Einstellung der Kanäle. Die Kanaleinstellungen werden mit Hilfe der Konfigurationssoftware zum Gerät übertragen und dort temporär oder dauerhaft abgelegt. Somit ist das μPIO / Temp12 als PC-Interface geeignet, kann aber auch für den Betrieb ohne PC (Stand-Alone) verwendet werden. Für jeden analogen Kanal (Temperatur- und Sensoreingänge) können zwei Grenzwerte definiert werden, die den Eingangswert als „HOCH“ und „TIEF“ einstufen. Diese Einstufung dient zur Ansteuerung von Kanälen, die als Alarmausgang konfiguriert sind. So kann ein Alarmausgang z.B. ein Steuersignal ausgeben, welches etwa einen Lüfter einschaltet, sobald eine Temperatur den Grenzwert „HOCH“ überschreitet. Ausserdem erscheint die Anzeige „HOCH“ bzw. „TIEF“ ggf. auch auf einem optionalen LCD-Display. Der Port D des μPIO /TEMP12 erlaubt den Anschluss eines Standard-LCDTextdisplays (HD44780) mit 4x20 Zeichen. Andere Displayformate werden NICHT unterstützt. Auf dem Display werden die Werte und Zustände der Datenkanäle automatisch angezeigt. Weitergehende Informationen finden Sie im Datenblatt.
 

 

  (2 Stück)
 

DS18B20 1-Wire Temperatursensor mit programmierbarer Auflösung

Messbereich -55°C bis +125°C (–67°F to +257°F)

  • 0,5°C Genauigkeit (-10°C bis +85°C)
  • Wandlungsdauer 750ms (max. bei 12 Bit)
  • TO-92 Gehäuse

 

 

Kleines Modulgehäuse mit Deckel. Verwendbar z.B. für den Einbau von kleinen Messmodulen, als Verteilergehäuse, etc.
  • Schraubenlose Klemmbefestigung des Deckels.
  • Kabeldurchbrüche (5 mm) an vier Seiten vorbereitet.
  • Aussen: 75 x 50 x 19 mm
  • Innen: 71 x 46 x 15 mm
  • Kunstoff ABS
  • Weiss
  

USB-Kabel
1,8m, schwarz

_________________________________________________________________________________________________________

   

 A multipurpose bundle for PC based control and data acquisition applications. The well-known ProfiLab Expert software and the USB with twelwe channels are a solid basis for a successful start of your automation projects.

 

 

 (application example)

 

  

ProfiLab Expert 4.0 /CD-ROM)

The ProfiLab-Expert software allows you to develop your own digital or analogue measuring technology projects. It doesn’t matter if you want to create analogue measurements or digital controls - you can realize it all. And for all this you don’t have to write a single program-line. You create your projects just like drawing a wiring diagram. Simply add buttons, displays, etc. to your diagram and build your project step by step.

  

 

The μPIO / TEMP12 allows you to connect up to twelve digital temperature sensors (type Dallas DS18B20). Data from twelve channels is transferred to your PC via USB. ONE temperature sensor can be connected to each of the screw terminals B0…B5 and C0…C5. Channels that are not occupied by temperature sensors, can take over alternative functions:

  • DS18B20 temperature sensor
  • Digital input
  • Digital output
  • Alarm output
  • Sensor input (ADC) (channels C0…C5 only)


The device is delivered with a configuration software, which allows you to setup each channel. The configuration is transferred to the device and stored temporarily or permanently. So the device can work as PC interface as well as in a stand-alone application.A “HIGH” sense limit and a “LOW” sense limit can be configured for each analogue channel (temperature or sensor). If a channel value gets classified as HIGH or LOW, this can trigger an depending alarm output. For example a cooler could be activated if a temperature channel indicates “HIGH”. Channels that exceed its limits are also indicated on an optional LCD display. A standard LCD text display (HD44780) with 4x20 characters can be connected on Port D. Other display formats are NOT supported. The display will show value and status of all channels automatically. See datasheet for further information.

 

  (2 pcs.)
DS18B20 Programmable Resolution 1-Wire Digital Thermometer
 

  • Measures temperatures from –55°C to +125°C (–67°F to +257°F)
  • ±0.5°C accuracy from –10°C to +85°C
  • Converts temperature to 12-bit digital word in 750ms (max.)
  • TO-92 package

 

  

Tiny module enclosure

Outside: 75 x 50 x 19 mm

Inside: 71 x 46 x 15 mm

Material ABS

White

 

USB cable
1.8 m, black
 

 

HTTPS://stores.ebay.de/ABACOM-Ingenieurgesellschaft