Fit All Jeep Grand Cherokee Models with Steel & Alloy Wheels in the following years : 1987 to 2010
This Ad is for a set of 20 wheel nuts
Technical Specification
Zinc Plated, 1/2" UNF Thread, 31mm Deep with closed end, Taper Seat & Uses a 21mm Socket/Wrench
Important Information
Always compare the seating and thread with the original equipment fitted, The Manufacturer Strongly recommends that each installation should be inspected during fitment and thoroughly checked after fitment (by spinning the wheel if necessary) after 200 miles or 300km use. Torque settings should be in accordance with vehicle manufacturers recommendations. If you are unsure about any aspect of fitting do not attempt to fit but contact your local dealer. Your wheel hubs or brakes may be adversely affected by wrongly fitted wheel nuts. Do not use air guns to fit.
Fitment: If no choices are shown in the compatibility "Notes" field then this product should be correct for the vehicle you have selected. If you need any help please contact us through the "contact seller" tab, please include your vehicle registration number and the parts you require, we can then send you links to the correct items for your vehicle.
Legal Information & Product
Fitment – All data in this ad is taken via third party databases, the company
makes every effort to ensure the listings are accurate but responsibility will
not be accepted for errors or omissions with-in the listings. You should always
check the product being fitted against the part being removed and check that
they are of the same specification, if you are unsure you should consult your
vehicle dealership for advice. “The Company” cannot be held responsible for any
consequential loss or damage caused by the incorrect fitting of a part or
fitting a part that is not suitable for the vehicle application – If you are
unsure you should always seek the advice and opinion of a qualified vehicle
mechanic. Any purchase made through this
ad constitutes the acceptance of these terms and conditions.