We found this AMAZING product for your VNA, VLA VOLVO Diesel truck engine and would like to share it with you!
No matter how well you maintain your truck, high heat and friction causes scratches, gouges, and wear to form on metal surfaces. Until now there was no way to reverse or prevent this inevitable metal wear. Adding 950 ml bottle of AMC MAXIMUM to your oil will restore the geometry of the moving parts of your Volvo truck engine, fill up any scratches and imperfections. This layer of ceramic lasts for up to 62,000 . The great thing about this additive is that it is activated by friction and heat - so it does not clog up oil passages or work where it is not needed.
Restores worn parts’ surfaces and compensates current wear
Levels and increases compression in cylinders
Reduces fuel consumption
Enhances engine service life
Increases pressure in oil system up to the nominal level
Creates active protection system against overloading and overheating
Reduces noise and vibration
Improves oil lubricating properties and tribological characteristics of engine parts
Increases engine power and acceleration capability
One treatment lasts for 60,000 miles - See more at: https://xado.us/revitalizants/3d-generation/maximum/amc-maximum-diesel-truck-diesel-engine#sthash.E8apuYQW.dpuf1 bottle of this product is enough for the engine with an oil capacity system with 30-45qt volume.
· Restores worn parts’ surfaces and compensates
current wear
· Levels and increases compression in cylinders
· Reduces fuel consumption
· Enhances engine service life
· Increases pressure in oil system up to the
nominal level
· Creates active protection system against
overloading and overheating
· Reduces noise and vibration
· Improves oil lubricating properties and
tribological characteristics of engine parts
· Increases engine power and acceleration
capability
· One treatment lasts for up to 62,000
1
bottle (950 ml) is enough for the engine with an oil capacity system
with 30-45 qt volume. Oil level should not exceed the maximal level of
oil gage. Avoid overdosage. -
1
bottle (950 ml) is enough for the engine with an oil capacity system
with 30-45 qt volume. Oil level should not exceed the maximal level of
oil gage. Avoid overdosage. - See more at:
https://xado.us/revitalizants/3d-generation/maximum/amc-maximum-diesel-truck-diesel-engine#sthash.E8apuYQW.dpuf GUARANTEED to provide
complete restoration of worn metal surfaces in the high-friction zones and coat the restored surface with metal -ceramic- to protect it from future wear.
Installation instructions are included, but all you have to do is pour the contents into your crank-case (oil filler) and drive your car. This product will fill in any scratches, gouges, wear, and it will form a ceramic coating wherever there is enough friction to do so.
picture below show how the revitalizing process works
No matter how well any mechanism is maintained, through its normal life over time the high heat and friction
causes metal surfaces to become worn, scratched, and deformed. This destruction occurs in high-friction areas, where
entire groups of atoms – clusters - may tear off under extreme loads.
this picture represents the condition described above
Revitalizant will act immediately as a
catalyst for rebuilding and repairing scratched up and worn out
metal after it is introduced to the area of excessive
thermal energy of a friction zone (in a simple words- it repairs the area where there is a friction heat generated)
Revitalization activates the absorption process of carbon through the surface layer which results in the formation of metal carbides.
the picture below represents the condition that we just described
A new durable protective coating is formed with the help of carbides
and metal particles. Maximum thickness of the restored area would not exceed the size of the original part because the Revitalizant would not build up in the normal contact areas, where is no excessive heat. Through its self-regulating heat activated feature, it does not layer up. Diffusion of the protective layer into the metal substrate
results in an extra strong durable gradient coating forming along the entire treated surface in the final stage of Revitalization.
pretty green surface below
It is highly recommended to change your oil before treating your engine with this product, since it has to work in the same oil for about 1500 miles!!!!
This beautiful stuff is made in the Netherlands. The compound has a self-regulating maximum thickness of around 30 microns, so it does not cake. Because this product rebuilds metal atom-by-atom, it does not flake off. The best part about this product is one treatment lasts for 100,000 miles!
You can learn more about this and other products of XADO Chemical group
all the product certificates , test reports and automobile manufacturers approvals can be found
by visiting the xado dot us
if you can not figure out what we just wrote above, please disregard the entire listing
SHIPPING OPTIONS
PLEASE MAKE SURE YOUR ADDRESS IS CORRECT AND COMPLETE BEFORE YOU HIT "PAY"!
First Class mail DOES take longer than Priority Mail, so, if you have time constraints, please choose your ship method accordingly:
Parcel Post can take up to 30 days; First Class ≈ 3-14 days; Priority Mail ≈ 1-5 days; UPS ≈ 1-5 days depending on destination.
INTERNATIONAL BUYERS
YOU are responsible for any duties or taxes that your country charges. First class is the slowest method of shipment.
If you need your item quickly, please choose PRIORITY MAIL.
NEED TO CONTACT US?
If you need to contact us for ANY customer service reason, please ONLY use the EBAY MESSAGING SYSTEM.
We will NOT see emails sent to our PayPal email account.
NEED TO CANCEL?
Contact us immediately through the EBAY MESSAGING SYSTEM.
However, because we usually ship orders same day or within 16 business hours, we CANNOT guarantee
your message will stop a shipment from leaving.
Refusing delivery is not the same as cancelling, and will incur shipping charges. So, to avoid fees,
please be sure you need the item that you are purchasing.
We found this AMAZING product for your VNA, VLA VOLVO Diesel truck engine and would like to share it with you!
No matter how well you maintain your truck, high heat and friction causes scratches, gouges, and wear to form on metal surfaces. Until now there was no way to reverse or prevent this inevitable metal wear. Adding 950 ml bottle of AMC MAXIMUM to your oil will restore the geometry of the moving parts of your Volvo truck engine, fill up any scratches and imperfections. This layer of ceramic lasts for up to 62,000 . The great thing about this additive is that it is activated by friction and heat - so it does not clog up oil passages or work where it is not needed.
· Restores worn parts’ surfaces and compensates current wear
· Levels and increases compression in cylinders
· Reduces fuel consumption
· Enhances engine service life
· Increases pressure in oil system up to the nominal level
· Creates active protection system against overloading and overheating
· Reduces noise and vibration
· Improves oil lubricating properties and tribological characteristics of engine parts
· Increases engine power and acceleration capability
· One treatment lasts for up to 62,000
1 bottle (950 ml) is enough for the engine with an oil capacity system with 30-45 qt volume. Oil level should not exceed the maximal level of oil gage. Avoid overdosage. -
Installation instructions are included, but all you have to do is pour the contents into your crank-case (oil filler) and drive your car. This product will fill in any scratches, gouges, wear, and it will form a ceramic coating wherever there is enough friction to do so.
picture below show how the revitalizing process works
No matter how well any mechanism is maintained, through its normal life over time the high heat and friction causes metal surfaces to become worn, scratched, and deformed. This destruction occurs in high-friction areas, where entire groups of atoms – clusters - may tear off under extreme loads.
this picture represents the condition described above
Revitalizant will act immediately as a catalyst for rebuilding and repairing scratched up and worn out metal after it is introduced to the area of excessive thermal energy of a friction zone (in a simple words- it repairs the area where there is a friction heat generated)
Revitalization activates the absorption process of carbon through the surface layer which results in the formation of metal carbides.
the picture below represents the condition that we just described
A new durable protective coating is formed with the help of carbides and metal particles. Maximum thickness of the restored area would not exceed the size of the original part because the Revitalizant would not build up in the normal contact areas, where is no excessive heat. Through its self-regulating heat activated feature, it does not layer up. Diffusion of the protective layer into the metal substrate results in an extra strong durable gradient coating forming along the entire treated surface in the final stage of Revitalization.
pretty green surface below
This beautiful stuff is made in the Netherlands. The compound has a self-regulating maximum thickness of around 30 microns, so it does not cake. Because this product rebuilds metal atom-by-atom, it does not flake off. The best part about this product is one treatment lasts for 100,000 miles!
You can learn more about this and other products of XADO Chemical group
all the product certificates , test reports and automobile manufacturers approvals can be found
by visiting the xado dot us
if you can not figure out what we just wrote above, please disregard the entire listing
SHIPPING OPTIONS
PLEASE MAKE SURE YOUR ADDRESS IS CORRECT AND COMPLETE BEFORE YOU HIT "PAY"!
First Class mail DOES take longer than Priority Mail, so, if you have time constraints, please choose your ship method accordingly:
Parcel Post can take up to 30 days; First Class ≈ 3-14 days; Priority Mail ≈ 1-5 days; UPS ≈ 1-5 days depending on destination.
INTERNATIONAL BUYERS
YOU are responsible for any duties or taxes that your country charges. First class is the slowest method of shipment.
If you need your item quickly, please choose PRIORITY MAIL.
NEED TO CONTACT US?
If you need to contact us for ANY customer service reason, please ONLY use the EBAY MESSAGING SYSTEM.
We will NOT see emails sent to our PayPal email account.
NEED TO CANCEL?
Contact us immediately through the EBAY MESSAGING SYSTEM.
However, because we usually ship orders same day or within 16 business hours, we CANNOT guarantee
your message will stop a shipment from leaving.
Refusing delivery is not the same as cancelling, and will incur shipping charges. So, to avoid fees,
please be sure you need the item that you are purchasing.