Product SKUs SYS-2028GR-TR SuperServer 2028GR-TR (Black)   Motherboard Super X10DRG-H   Processor/Cache CPU Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) * Dual Socket R3 (LGA 2011) Cores / Cache Up to 22 Cores† / Up to 55MB† Cache System Bus QPI up to 9.6 GT/s Note † BIOS version 2.0 or above is required Note * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. GPU/Xeon Phi Support K1/K2/K10/K40/K80/M40/M60/Xeon Phi   System Memory Memory Capacity 16x 288-pin DDR4 DIMM slots Up to 2TB† ECC 3DS LRDIMM, 1TB ECC RDIMM Memory Type 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit DIMM Sizes RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB 3DS LRDIMM: 128GB Memory Voltage 1.2 V Error Detection Corrects single-bit errors   On-Board Devices Chipset Intel® C612 chipset SATA Intel C612 Controller SATA3 (6Gbps) with RAID 0, 1, 5, 10 IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC Network Controllers Intel® i350 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Graphics ASPEED AST2400 BMC   Input / Output SATA 10 SATA3 (6Gbps) ports LAN 2 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port USB 4 USB 3.0 ports (2 rear, 2 via header) 2 USB 2.0 ports (2 via headers) Video 1 VGA Connector Serial Port 1 Serial header   System BIOS BIOS Type 128Mb SPI Flash EEPROM with AMI® BIOS BIOS Features Plug and Play (PnP) APM 1.2 DMI 2.3 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support Hardware BIOS Virus protection SMBIOS 2.3 UEFI RTC (Real Time Clock) Wakeup Chassis Form Factor 2U Rackmount Model CSE-218GH-R2K03B   Dimensions and Weight Height 3.5" (89mm) Width 17.2" (437mm) Depth 31" (787mm) Package 26.5" (H) x 11" (W) x 44.5" (D) Weight Net Weight: 39.5 lbs (17.9 kg) Gross Weight: 54 lbs (24.5 kg) Available Color Black   Front Panel Buttons Power On/Off button System Reset button LEDs Power LED Hard drive activity LED 2 Network activity LEDs System Overheat LED / Fan fail LED / UID LED   Expansion Slots PCI-Express 4 PCI-E 3.0 x16 slots (support GPU/Xeon Phi cards, option) 1 PCI-E 3.0 x8 (in x16) low-profile slot   Drive Bays Hot-swap 10 Hot-swap 2.5" drive bays   System Cooling Fans 5 heavy duty 8cm fans with optimal fan speed control   Power Supply 2000W 1U Redundant Power Supplies with PMBus Total Output Power 1000W/1800W/1980W/2000W Dimension (W x H x L) 73.5 x 40 x 265 mm Input 100-120Vac / 12.5-10.5A / 50-60Hz 200-220Vac / 10-9.5A / 50-60Hz 220-230Vac / 10-9.8A / 50-60Hz 230-240Vac / 10-9.8A / 50-60Hz 200-240Vac / 10-9.8A (UL/cUL only) 200-240Vdc / 10-9.1A (CCC only) +12V Max: 83.3A / Min: 0.1A (100-120Vac) Max: 150A / Min: 0.1A (200-220Vac) Max: 165A / Min: 0.1A (220-230Vac) Max: 166.7A / Min: 0.1A (230-240Vac) Max: 166.7A / Min: 0.1A (200-240Vac) (UL/cUL only) 12V SB Max: 3.5A / Min: 0A Output Type 25 Pairs Gold Finger Connector Certification   PC Health Monitoring CPU Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. 5 Phase-switching voltage regulator FAN Total of five 4-pin PWM fans 5 fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control Temperature Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 10x Fan Connectors PSU I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI LED Power Fail / Overheat LED Suspend-state Indicator LED UID LED Other Features SDDC Support   Operating Environment / Compliance RoHS RoHS Compliant Environmental Spec. Operating Temperature:     10°C to 35°C (50°F to 95°F) Non-operating Temperature:     -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity:     8% to 90% (non-condensing) Non-operating Relative Humidity:     5% to 95% (non-condensing)

See Parts List Parts List - (Items Included)   Part Number Qty Description Motherboard / Chassis MBD-X10DRG-H  CSE-218GH-R2K03B 1 1 Super X10DRG-H Motherboard 2U Black SC218G Chassis Backplane BPN-SAS-218A 1 10-port 2U (GPU chassis) SAS 6Gbps direct-attached backplane, support up to 10x 2.5-inch SAS/SATA HDD/SSD Cable 1 CBL-0484L 2 SATA,INT,ROUND,ST-ST,55CM,30AWG Cable 2 CBL-0460L 1 8 Pin to Two 4 Pin Backplane Power Ext. 28/22cm. 18AWG Cable 3 CBL-0294L-02 2 MINI SAS-4 SATA,INT,58CM,58CM SB,REV,30AWG Cable 4 CBL-PWEX-0582 4 8 pin to two 6+2 pin 12V GPU power cable, 30 cm 16/20 AWG, 10A/pin(16AWG), 6A/pin(20AWG), -25~85C, RoHS/REACH Cable 5 CBL-0157L 1 CBL,SGPIO,2X4F TO 2X4F,P2.54,RIBBON IN RND TUBE,40CM,28AWG Label LBL-0108 1 CAUTION LABEL FOR REDUNDANT PWR SYSTEMS Manual MNL-1626-QRG 1 SYS-2028GR-TR(T)/TRH(T), QRG,HF,RoHS/REACH Riser Card RSC-G2FR-A66 1 RSC-G2FR-A66-O-P Riser Card RSC-G2F-A66 1 RSC-G2F-A66-O-P Riser Card RSC-R2UG-E16R-X9 1 RSC-R2UG-E16R-X9 Heatsink / Retention SNK-P0048PS 1 2U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Narrow ILM MB Heatsink / Retention SNK-P0047PS 1 1U Passive CPU Heat Sink for X9, X10 Systems Equipped w/ a Narrow ILM MB Power Supply PWS-2K03P-1R 2 1U 2000W Redundant Power Supply Platinum 73.5mm width.,RoHS/REACH Optional Parts List   Part Number Qty Description GPU Supporting Bracket MCP-240-00139-0N - NVIDIA-GPU + PCI Bracket for supporting APEX2800LP and AOC-S2308L-L8E on SC218GH GPU Supporting Bracket MCP-120-00070-0N - SC218G-4GPU INTEL-XEON-PHI GPU Supporting Bracket Set (SC218-INTEL-KNIGHTR-GPU-BKT) Cable CBL-PWEX-0665 - PCIe 8 pin female(black) to CPU 8 pin female(white), K80/M60/M40 GPU power for 300W card, 30cm, 18AWG Battery Backup Kit BTR-TFM8G-LSICVM02 MCP-240-00127-0N 1 1 Broadcom Supercap w/ 8GB CV + 24'' cable (whole kit) Broadcom SuperCap Bracket, Include Screw, Same Size as 2.5" HDD Global Services & Support OS4HR3/2/1 OSNBD3/2/1 - - 3/2/1-year onsite 24x7x4 service 3/2/1-year onsite NBD service Software SFT-OOB-LIC 1 OOB Management Package (per node license) Software SFT-DCMS-Single 1 DataCenter Management Package (per node license)

 

Terms and Conditions

Hours of Operation

Our business hours are 10am to 5pm PST Monday through Friday. All email requests will be addressed within 24 hours.

Returns or Exchanges

Returns postmarked within 30 days of the delivery of the original shipment will be accepted with 20% restocking fee, no returns allowed after 30 days. All returns must be approved by Customer Relations who will issue a Return Merchandise Authorization (RMA) number. If the item is defective and is under warranty, please contact us and we will assist you in pursuing a warranty claim with the manufacturer.

Payment

We proudly accept PayPal. If another form of payment needs to be used please contact us first. We can work with most payment methods. California residents will be charged sales tax.

Shipping Info

We ship items worldwide, including APO / AEO address, via Fedex or US Postal Service. Items will be shipped within 2 business days upon receiving payment although in most cases they are shipped same or next day. Feel free to email us to confirm product availability and shipping date.