Description |
This is useful set for HCS comaptible models. Ch1 Setting in the KR-415FHD is HCS mode.
The HCS mode shortens the communication time of the signal which has been compressed. KR-415FHD can change a mode to each channel 1-4 indiviually.
HCS is a communication method to largely improve linearity of the servo movement. When using HCS mode, correspondence servos(ex, RSx3/BSx3series)are required. The correspondence servo recognizes both modes automatically.
KR-415FHD achieves a highly precise receiving performance with the use of a dual circuit and an external and internal antenna.
This is 5.5 mm thiner than previous models. So, Car gravity is lower, and you can easy installation to the Radio box on the car.
Antenna normal length is 210mm.(Antenna socket to top of antenna.) And Short type is 90mm length. n the case of short antenna, Accesstable to install an antenna tube directly to the receiver case. It fits into the body of the electric touring car clearly.
1,Switch off the receiver and connect the mode selector to a channel that you would like changed. 2,While pushing the set button on the receiver, turn the power source ON. When the LED of the mode selector lights up, the change is completed?The correspondence servo recognizes both modes automatically. So you do not change mode operation to the servo.
Receiver with RS Set setting is HCS mode in the channel 1. You can use HCS compatible servo without setting.
"Torque" and "Speed" are usually considered important specs. The one 10 Grasper has been developed with the feature of "Holding Power" which provides the feeling of the Torque when driving a car. The “Holding Power” is to hold the position of servo. If this power is strong, a steering is stable. “Grasper” means “holding firmly”. The name of "Grasper” comes from the feature of grasping the road.
The aluminum top case support the stable ‘Holding Power’ The case is machined after anodizing, creating a sharp design and beautiful edge line of the case. By shaving off the inside of the case to extremity, while securing sufficient strength, the case is made lighter than the former aluminum case.The black wire servo leads with cool appearance provides suitable softness for installation, while securing necessary current capacity.
The following factory MODEL settings are pre-installed.
You can chenge setting by Servo Model Selector.
Model1: GRASPER POWER SETTING
Model2 to 5:GRASPER NORMAL SETTING(Slected)
*Model2 has been selected in factory setting.
The Servo Model Selector is a product that changes the model memory selection of KO PROPO RSx and BSx series servos easily.
RSx,RSx2,BSx2, RSx one10, Bsx2 one10. Thease servos can memorize settings of each parameter in a servo.
You can change models of servos.
Connect wire of Servo moel selector to Receiver.( or Battery) and connect servo to this Unit. You will know the model number memory by the number of flashes from the LED.
The number of flashes of the LED are changed by pushing the button of the unit.
Current model number is the pattern of flashes of the LED.
The HCS receiver can have each individual channel (1-4) mode changed. Connecting this product to each channel of the HCS receiver can change the configuration of the mode setting and can confirm the mode being used.
Payment |
Combined Shipping |
Shipping |
International Shipping |
Warranty |
Contact Us |