MBD-H8SMi-2-O |
- H8SMi-2 (Standard Retail Pack)
|
MBD-H8SMi-2-B |
|
|
![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) |
Form Factor |
|
Dimensions |
- 12" x 9.6 " (30.5cm x 24.4cm)
- 6 layers
|
|
![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) |
CPU |
- Single 940-pin AM2 Socket
- Supports one Quad-Core AMD Opteron™ 1000 Series
(Socket AM2) processor NOTE: Motherboard PCB revision 2.xx is needed to support quad-core processor
|
System Bus |
|
Chipset |
|
|
![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) |
Memory Capacity |
- Four 240-pin DIMM sockets
- Supports up to 8 GB DDR2 800/667/533 MHz memory
- Single or Dual (recommended) channel memory
|
Memory Type |
- DDR2 800/667/533MHz un-buffered ECC / non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
|
Memory Voltage |
|
|
![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) |
SATA |
- nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5, JBOD Support
|
IDE |
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA/100/133
|
IPMI |
|
Network Controllers |
- nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
VGA |
- ATI ES1000 Graphics Controller
16MB Graphics & VGA port
|
Super I/O |
|
|
![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) |
SATA |
|
IDE |
- Single ATA 133/100 EIDE channels support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports ATA133/100
|
Floppy |
|
LAN |
|
USB |
- 2 USB Rear Ports
- 4 USB Internal Headers
- 6 Total USB 2.0 Compliant, 1.1 Compatible
|
VGA |
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
Serial Ports |
- 1 Fast UART 16550 serial ports
- 1 Header
|
Parallel Port |
- 1 ECP / EPP parallel port
|
Others |
- 1 SATA DOM power connector
|
|
![](https://www.supermicro.com/a_images/pixel.gif) |
![](https://www.supermicro.com/a_images/pixel.gif) |
![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) |
Important Chassis Notes |
- To ensure system stability, a 300W (minimum) ATX power supply
[4-pin (+12V) and 24-pin are required]
|
|
![](https://www.supermicro.com/a_images/pixel.gif) |
![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) |
Model(s) |
|
|
![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) |
PCI-Express |
- 1 x16 PCI-e slot
(nVidia SLI Technology Supported) - 1 x8 PCI-e using x16 slot
- 1 x4 PCI-e using x8 slot
|
PCI |
- 3 PCI 32-bit, 33MHz slots
|
|
![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) |
BIOS Type |
- 4Mb Flash EEPROM with AMI® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- BIOS Rescue Hot Keys
- SMBIOS 2.3
- USB Keyboard support
- Hardware BIOS Virus Protection
|
|
![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) |
Software |
|
Power Configurations |
- ACPI Power Management
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Main Switch Override Mechanism
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
|
|
![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) |
CPU |
- Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
- Monitor for HyperTransport voltage 1.2V, DDR termination 1.25V
- CPU switching voltage regulator
|
FAN |
- Total up to five 3-pin fan headers
- 5 Fan Status Tachometer monitoring
- Status Monitor for Speed Control
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- I2C temperature sensing logic
|
LED |
- CPU / Overheat LED
- Suspend-state indicator LED
- +5V Standby Alert LED
|
Other Features |
- Chassis Intrusion Header
- Chassis Intrusion Detection
- Chipkill Support
|
|
RoHS
|
|
Environmental Spec. |
- Operating Temperature: 10°C to 35°C (50°F to 95°F)
- Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) |
FCC |
- Passed to meet FCC standard requirement
|
|