You are bidding on a New Pull (Pull from New System. Customer cancelled order)

Supermicro H8SMI-2-AS002 Rev 2.01 ATX motherboard and AMD Opteron 1385 2.7GHz CPU

Note: All motherboard comes with I/O shield in OEM/Bulk package. This listing comes with Motherboard, CPU and Heatsink Fan Only. Memory not included. Picture for reference only.

  Specification:

MBD-H8SMi-2-O H8SMi-2 (Standard Retail Pack) MBD-H8SMi-2-B H8SMi-2 (Bulk Pack)   Physical Stats Form Factor ATX Dimensions 12" x 9.6 " (30.5cm x 24.4cm) 6 layers   Processor/Chipset CPU Single 940-pin AM2 Socket Supports one Quad-Core AMD Opteron™ 1000 Series (Socket AM2) processor NOTE: Motherboard PCB revision 2.xx is needed to support quad-core processor System Bus 1000MHz HyperTransport Chipset nVidia MCP55 Pro   System Memory Memory Capacity Four 240-pin DIMM sockets Supports up to 8 GB DDR2 800/667/533 MHz memory Single or Dual (recommended) channel memory Memory Type DDR2 800/667/533MHz un-buffered ECC / non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs DIMM Sizes 256 MB, 512 MB, 1GB, 2GB Memory Voltage 1.8V only   On-Board Devices SATA nVidia MCP55 Pro SATA2 3.0Gbps Controller 6 SATA Ports nVidia RAID 2.0 SATA RAID 0, 1, 0+1, 5, JBOD Support IDE Supports UDMA Mode 5 Supports PIO Mode 4 Supports ATA/100/133 IPMI Support for Intelligent Platform Management Interface v.2.0 200-pin IPMI slot (Optional: AOC-SIMLP-B(+)  R 3.00) ** (Optional: AOC-SIMLP-3(+)  R 3.00) ** with 3rd LAN support (Optional: AOC-SIM1U(+)  R 3.00) ** for 1U RMM (Remote Management Module) (Card not included) Network Controllers nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output VGA ATI ES1000 Graphics Controller 16MB Graphics & VGA port Super I/O Winbond 83627HF   Input / Output SATA Up to six SATA2 devices IDE Single ATA 133/100 EIDE channels support up to two UDMA IDE devices Supports UDMA Mode 5 Supports ATA133/100 Floppy 1 Floppy port 1.44 MB LAN 2 RJ45 LAN ports USB 2 USB Rear Ports 4 USB Internal Headers 6 Total USB 2.0 Compliant, 1.1 Compatible VGA 1 VGA port Keyboard / Mouse PS/2 keyboard and mouse ports Serial Ports 1 Fast UART 16550 serial ports 1 Header Parallel Port 1 ECP / EPP parallel port Others 1 SATA DOM power connector

Chassis ( Optimized for H8SMi-2 ) Important Chassis Notes To ensure system stability, a 300W (minimum) ATX power supply [4-pin (+12V) and 24-pin are required]   Server(s) ( with H8SMi-2 ) Model(s) AS -1011M-T2   Expansion Slots PCI-Express 1 x16 PCI-e slot (nVidia SLI Technology Supported) 1 x8 PCI-e using x16 slot 1 x4 PCI-e using x8 slot PCI 3 PCI 32-bit, 33MHz slots   System BIOS BIOS Type 4Mb Flash EEPROM with AMI® BIOS BIOS Features Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 2.0 BIOS Rescue Hot Keys SMBIOS 2.3 USB Keyboard support Hardware BIOS Virus Protection   Management Software Optional IPMI (Intelligent Platform Management Interface) 2.0 Super Doctor III Power Configurations ACPI Power Management Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header Main Switch Override Mechanism Power-on mode control for AC power loss recovery Internal/External modem remote ring-on   PC Health Monitoring CPU Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT Monitor for HyperTransport voltage 1.2V, DDR termination 1.25V CPU switching voltage regulator FAN Total up to five 3-pin fan headers 5 Fan Status Tachometer monitoring Status Monitor for Speed Control Temperature Monitoring for CPU and chassis environment CPU Thermal Trip support I2C temperature sensing logic LED CPU / Overheat LED Suspend-state indicator LED +5V Standby Alert LED Other Features Chassis Intrusion Header Chassis Intrusion Detection Chipkill Support   Operating Environment / Compliance RoHS RoHS Compliant 6/6, Pb Free Environmental Spec. Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing)   OS Compatibility • Please see our OS Compatibility Chart   Regulatory FCC Passed to meet FCC standard requirement

Delivery time normally takes 2-7 business days in the USA depending what carrier you choose. International shipment will take upto 14 working days or longer. For international customer we do not cover any custom fees. It's your responsibilities for any fees associated with your purchase. We keep all the serial #s inhouse for verify returns. PLEASE READ CAREFULLY, DO NOT BID IF YOU DON'T AGREE WITH OUR TERMS! THANK YOU VERY MUCH!

We accept PayPal. PayPal is preferred. Please pay within 3 days of auction closed. We ship to PayPal confirmed address only or your payment may have refunded. All sales are final. For Shipment and tracking # will be send within 24 hours of payment received. Thanks!