The RiT SMART Giga 24 line of data communications patch panels is the ultimate solution for cross-connect equipment in today's high performance computing environment. The panels are optimized for ease of assembly and installation, resulting in significantly lower labor costs. A unique assembly fixture is available for supporting the panel during assembly. Special provisions were made for simplifying termination of shielded cables and for completely sealing the metal casing in order to achieve superior EMI/RFI performance. SMART Giga 24 features a large variety of models which cover many different applications and customer requirements, including modern voice systems. With the ever increasing need for faster data transmission rates, these panels minimize cross-talk and insertion-loss.
SMART Giga 24 patch panels conform to ANSI/TIA/EIA-568-B.2, ISO/IEC 11801 2nd edition (2002) and CENELEC EN50173 (2002) for Category 5e/Class D, and are designed for high-speed protocols such as ATM 622 Mbps and Gigabit-Ethernet 1000 Mbps. SMART-Giga 24 and SMART 24 panels are available in shielded or unshielded models and in a variety of cable interconnection options.
Special SMART Giga 24 model, when used in conjunction with RiT's PatchView system, are able to perform remote or on-site scanning of the patching configuration. The entire wiring center's patching configuration is continuously monitored by a scanner which reports the data to a remote terminal. The network administrator uses this data as a vital part of his cabling management system. The data may be displayed on the panel itself by LED indicators. Servicing time is dramatically reduced as computerized LED displays guide the technician when performing Moves, Adds & Changes (MAC).
Specification
Interface
Front Interconnection (patch cords side)
- 24 eight or ten-position RJ-45 modular jacks, shielded or unshielded as specified by customer.
Back Interconnection (cabling side)
Two connector options as specified by customer:
- 24 eight-position 110 IDC blocks, accept 22 to 26 AWG wires, solid or stranded. Rated for up to a minimum of 200 re-termination cycles.
- 24 eight-position KRONE LSA-PLUSblocks, accept 22 to 26 AWG wires solid or stranded. Rated for up to a minimum of 200 re-termination cycles.
Ground Interconnection (in shielded models only)
- Grounding channels for clamping shielding braids of up to 24 cables, of 5 to 11 mm outer diameter. No special tools required.
Cable Routing and Clamping
- 24 T-shaped anchors for clamping cables with cable-ties. 4.8 mm wide ties, such as PANDUIT P/N PLT 2S are recommended. Cable-ties can be ordered from RIT.
Interconnection to RIT's PatchView system (in selected models)
- A 26-pin, 100 mil spacing header on the back of the panel is used for connection to PatchView Scanner. Select Scanner Attachment Cord according to the required length. The scanning signal is transmitted over pin 9 of the RJ-45. Pin 9 exists in special ten-position RJ-45 jack and plug designs used for these patch panel models. A special patch cord - SMART Jumper, including an extra wire and special RJ-45 plugs is needed.
VAT @ 20% INCLUDED IN PRICE - VAT INVOICE PROVIDED
£35 excluding VAT
VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UK
TH 186749