The Blue Yeti USB Microphone employs a unique, tri-capsule design and the ability to capture audio in up to 16-bit, 48 kHz resolution. This studio-quality microphone is highlighted by a mic with an integrated headphone amp that's backed by an independent gain control for latency-free monitoring. Other features include microphone gain control, an instant mute function and an included stand that allows for pivoting in a variety of angles for ideal placement.

A versatile microphone that's great for recording vocals, podcasts, music, interviews and even college lectures, depending on your sound source, this foldable microphone also allows the listener to select between stereo, cardioid, omnidirectional, or bi-directional polar patterns for optimal results. Additionally, the Yeti is Mac and Windows compatible and includes a USB cable which lets you plug it in and record.

Total Recording Control with Yeti

Yeti features studio controls for headphone volume, pattern selection, instant mute and microphone gain—putting you in charge of every level of the recording process. If you’re experiencing distortion or feedback while recording an especially loud source—like the deafening sound of an avalanche—simply adjust the microphone's sensitivity with the gain control. Or if you want to take a break in the middle of a podcast, use the instant mute button.

The microphone comes equipped with a 3.5-millimeter headphone jack that allows you to listen to what you're recording in real-time, without latency delays—that means no more hearing a note 3 seconds after you played it. You can adjust the volume of your headphones using the control on the front of the microphone.

Innovative Design Makes Recording Easy

Yeti doesn’t mind getting pushed around—it lets you adjust and pivot the microphone in relation to the sound source, which optimizes your sound quality. Once you’ve achieved the desired angle, simply hand-tighten the set knobs to secure it in place. Yeti is a side-address microphone, so you can capture the best sound by going face-to-face with it. The microphone can also be folded down for easy portability, or removed completely from its base for mounting directly on a mic stand or Radius II shockmount.

Hassle-Free Setup

Simply plug Yeti into your computer's USB port with the included USB cable, calibrate it with your operating system, and you're ready to record—rain, shine or snow. Yeti offers driver-free operation, while the Yeti Pro requires easy-to-install drivers, available from Blue.

Start Recording Quickly

Who needs a learning curve? Yeti was designed with a convenient, no-hassle workflow in mind. Set up in seconds with the included desktop stand or connect directly to a mic stand. Adjust microphone gain, pick up pattern, headphone volume, or mute/unmute with easy-to-reach controls. And record in comfort with Yeti’s side-address operation.

Four Different Pattern Modes for Versatile Recording

• Stereo Mode - The stereo mode uses both the left and right channels, and is ideal for capturing a realistic, general sound image.
• Cardioid Mode - Well-suited for podcasts, vocals, or game streaming, cardioid mode records sound sources that are directly in front of the microphone. It delivers a rich, full-bodied sound.
• Omnidirectional Mode - Omnidirectional mode picks up sound equally from all directions. It’s best used in situations when you want to capture the ambience of 'being there'—like a live recording of a band's performance.
• Bidirectional Mode - Bidirectional mode records from both the front and the rear of the microphone. It’s ideal for capturing the nuance of a musical instrument, or recording an interview between two people.

• The ultimate professional USB microphone
• Three condenser capsules can record almost any situation
• Gain control, mute button, zero-latency headphone output
• Unique positionable design
• Hassle-free setup and recording
• Cardioid, bidirectional, omnidirectional and stereo
• Perfect for vocals, instruments, Podcasting and more
• Plug 'n Play - Mac and PC compatible

• Blue Yeti USB Microphone (Satin Red)
• Adjustable Stand
• USB Cable
• User Manual

The Knox Gear Pop Filter for Yeti Microphones is a guard used by amateurs and professionals to achieve clearer audio recordings by eliminating 'popping' sounds from P's and B's. It also keeps saliva from hitting the microphone. The included gooseneck clamp enables the filter to be placed in a variety of positions.

An Inexpensive Way to Improve Audio Quality

Whether you're a professional or amateur, adding a pop screen to your recording set up is a cheap and easy way to improve the audio quality of your recordings immediately. Pop screens diffuse wind and gusts of air expelled from your mouth when you speak to help eliminate the loud thuds that can occur when air hits the microphone. Eliminating these noises makes your recorded audio sound clearer and more professional to listeners!

Designed Specifically for Yeti Microphones

This pop screen is specially designed for use with the Blue Microphones Yeti. The Yeti's base is a non-standard design so traditional pop guard clamps can be difficult to attach to it. The clamp for this pop guard is flat instead of curved so it will sit directly against the Yeti's stand. Padding on both surfaces of the clamp protects your microphone from scratches and damage.

Fully Adjustable Gooseneck Arm

The pop screen is mounted on a flexible gooseneck arm that allows you to position it however you want. For extra support and stability during recording, the arm can be bent around the stand and mic. The arm is roughly 14 inches long so you can position the screen as close or as far away from the mic's surface as you'd like.

Large Surface Area

The screen is 6 inches in diameter and will diffuse bursts of air even if the source isn't directly in front of the microphone. This means you can conduct interviews with people who are sitting next to you without worrying about either of you causing pops or thuds. The large screen will also protect your Yeti microphone from saliva that might be expelled from your mouth as you talk.

• Specifically designed for Blue Yeti microphone
• Also compatible with other desktop microphones
• Eliminates thuds and pops
• Clean sound every time
• Gooseneck for precise positioning

• Knox Gear Pop Filter for Yeti Microphones

Introduce your ears to a world of crystal-clear, expansive, high-fidelity audio with the TX-100 Closed-Back Studio Monitor Headphones from Knox Gear. These adjustable over-ear headphones are engineered for exceptional comfort, superior sound quality, and convenient portability anywhere you go. These headphones include a 1/4-inch adapter and feature an extra-long 10-foot cord for versatility.

Noise Blocking Closed-Back Design

Experience a crystal-clear high-fidelity audio soundscape with these closed-back headphones from Knox Gear. The TX-100s isolate your ears from unwanted external noise, preserving your bubble (and maybe your sanity) in loud environments. Closed-back headphones are the ideal listening companion when you want to isolate the most amount of external noise possible while keeping your focus dedicated solely to your audio of choice. The closed ear cups reduce the amount of outside sound that can seep in, making them the perfect choice for commuting and general noisy environments.

Powerful Bass with Clear Mids and Highs

Knox Gear headphones are engineered for maximum dynamic range and superior sound quality. 50 mm speaker unit drivers are coupled with neodymium magnets to deliver deep, rich bass, clear treble and vocals, and crisp high tones.

For Recording, Music Production, Gaming

No matter what your passion is, Knox Gear is the gear for your ears. Trusted by both audiophiles and professionals in the industry. The TX-100s are the perfect headphones for studio recording, production, gaming, and pure musical enjoyment.

Creating Better Soundscapes

Powerful 50mm drivers and neodymium magnets combine to enhance the full spectrum of your audio experience – from deep, lush basses and clear, wide mids to crisp, artifact-free high-ranges.

Comfort Makes the Difference

You won’t perform at your best or properly enjoy your music with hard, uncomfortable over-ears or earbuds. That’s why we’ve designed the TX-100 with super soft, ear-pampering ear pads and an elastic headband that adjusts to fit comfortably over any hairstyle, hat, or head shape. Whether you need headphones for all-day head-grooving, long hours in the studio, or a marathon gaming session, Knox Gear is here.

• Closed-back design
• 50mm speaker unit driver
• Comfortable ear pads
• Adjustable elastic headband
• Includes 1/4-inch adapter
• Extra long 10-foot cord

• Knox Gear TX-100 Closed-Back Studio Monitor Headphones
• 1/4-Inch Adapter
• Limited 1-Year Manufacturer's Warranty