A set of 4 high quality Locking Wheel Bolts manufactured by Evo -
Protect your investment by securing expensive wheels and tyres.
Please NOTE -
These are a replacement set of bolts and this locking key will not fit any
Locking Bolts already fitted to your vehicle.
Fit all the Following Peugeot Models With original OE Alloy Wheels Only
Peugeot 206 1999 on
Peugeot 207 2006 on
Peugeot 208 2013 on
Peugeot 308 2007 on
Peugeot 407 2004 on
Peugeot 508 2011 on
Peugeot 1007 2005 on
Peugeot 3008 2009 on
Peugeot 5008 2010 on
Evo locking wheel nuts and bolts are supplied with
a unique key number, a replacement key can be obtained direct from the
Manufacturer (Details Included in box)
They have a very strong
3 pin design. This makes them very secure and hard to remove.
Approved and used by
many major Car Companies
Each Bolt has a
stainless cap to cover the bolt head, this makes them look like a normal bolt
and matches your other wheel bolts.
The key uses a standard
17mm socket
Manufactured to ISO9001
QS9000 Standards.
Important Information
Always compare the
seating and thread with the original equipment fitted, The Manufacturer
Strongly recommends that each installation should be inspected during fitment
and thoroughly checked after fitment (by spinning the wheel if necessary) after
200 miles or 300km use. Torque settings should be in accordance with vehicle
manufacturers recommendations. If you are unsure about any aspect of fitting do
not attempt to fit but contact your local dealer. Your wheel hubs or brakes may
be adversely affected by wrongly fitted wheel nuts. Do not use air guns to fit.
Fitment: If no choices are
shown in the compatibility "Notes" field then this product should be
correct for the vehicle you have selected. If you need any help please
contact us through the "contact seller" tab, please include your
vehicle registration number and the parts you require, we can then send you
links to the correct items for your vehicle.
Fitment – All data in
this ad is taken via third party databases, the company makes every effort to
ensure the listings are accurate but responsibility will not be accepted for
errors or omissions with-in the listings. You should always check the product
being fitted against the part being removed and check that they are of the same
specification, if you are unsure you should consult your vehicle dealership for
advice. “The Business Seller” cannot be held responsible for any consequential
loss or damage caused by the incorrect fitting of a part or fitting a part that
is not suitable for the vehicle application
– If you are unsure you should always seek the advise and opinion of a
qualified vehicle mechanic. Any purchase
made through this ad constitutes the acceptance of these terms and conditions.