Document
    Shop Category
    New List Item

    50W 0.8 Ohm Aluminium Housing Chassis Mount Wirewound Power Resistor Green 2pcs

    50W 0.8 Ohm Aluminium Housing Chassis Mount Wirewound Power Resistor Green 2pcs

    • 50 Watt and 0.8 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
    • Aluminum Housed. An insulated cover would suppress the heat, which can bear the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
    • This 50W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
    • Board length 1.96 inches(49.8mm) with two 3.5mm mounting hole, and 2 terminals for a connection.
    • Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.

      • 50 Watt 0.8 Ohm Aluminum Case Resistor with 5% Tolerance

      Power: 50W

      Resistance: 0.8 ohm

      Tolerance: 5%

      Connection Type: Rods

      Board Length: 49.8mm

      Mounting Hole Diameter: 3.5mm

      Distance Between Mounting Hole: 41mm

      Materials: Nickel Alloys Wire Wound Resistor with Aluminum Case

      Color: Green

      Package Content: 2 pcs 50W 0.8 ohm Aluminum Resistor

      Suggestion:

      a. The load resistor will get huge hot, please don't touch it when the resistor is working.Because resistor is a braking device which transfers Electric energy to Thermal energy.This is a
      normal physical phenomenon.


      b. The load resistor should be mounted on metal board, not on flammable board such as plastic board,rubber,paper,wood and etc.

      c. We recommend a 30%-50% increase in rated power based on your actual load power and add a heat sink device when it is necessary.

      • If you choose a 30% increase in rated power, you must add a heat sink device.
      • If you choose a 50% increase in rated power, you can add a heat sink device for the best use of its performance.


      d. Not recommend to use it for Automotive repair or refit unless you have professional knowledge.

    Item Specifics
    MPNDoes Not Apply
    BrandUxcell
    upc714998091642
    TypeAluminum Resistor
    Manufacturer WarrantyNone
    Termination StyleThrough Hole
    Minimum Operating TemperatureDoes Not Apply
    Tolerance Rating±5 %
    Maximum Operating TemperatureDoes Not Apply
    Resistance Rating0.8Ω
    Hot Item
    • Our group comprises factories in Asia that manufacture OEM and home and garden products.
    • We believe in FACTORY DIRECT purchases.
    • Our mission is to deliver Lower Prices and Better Quality to consumers and distributors wherever, whenever.
    • We strive to ensure that our products are reliable, updated and that our transactions are smooth and speedy.
    • We are proud to have served over 500,000 ebay buyers worldwide.

    International Buyers - Please Note:

    • Import duties, taxes and charges are not included in the item price or shipping charges. Buyers are responsible for these charges.
    • Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
    • Note that delivery times may vary, particularly during peak periods or inclimate weather conditions.
    • We cannot ship on weekends and we do not offer Saturday, Sunday or holiday delivery.
    • All our items will be shipped to buyer's PayPal address, please confirm your address on PayPal before you bid. Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
    • Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
    • If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number.
    • Your returned product(s) will not be processed without a completed RMA.
    • We left positive feedback for you after receiving payment. Your feedback is very important for us, positive feedback and 5 Score DSR is highly appreciated.
    • Please let us know before leaving any negative feedback or 1 point, 2 point low DSR or open any disputes on Paypal and Ebay, please give us the opportunity to resolve any problems and we will try our best to satisfy your needs.
    • If any question, please feel free to contact us via 'Ask seller a question' ,We try our best to reply to your emails as soon as possible, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately.Please allow 1-2 business days for us to response.
    • Please email us to resolve any problem before you leave any feedback to us. We will reply you via email ASAP, if no response for you within 48 hours, please check the spam / junk folder in your mail box.

      50W 0.8 Ohm Aluminium Housing Chassis Mount Wirewound Power Resistor Green 2pcs

      50W 0.8 Ohm Aluminium Housing Chassis Mount Wirewound Power Resistor Green 2pcs

      • 50 Watt and 0.8 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
      • Aluminum Housed. An insulated cover would suppress the heat, which can bear the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
      • This 50W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
      • Board length 1.96 inches(49.8mm) with two 3.5mm mounting hole, and 2 terminals for a connection.
      • Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.

        • 50 Watt 0.8 Ohm Aluminum Case Resistor with 5% Tolerance

        Power: 50W

        Resistance: 0.8 ohm

        Tolerance: 5%

        Connection Type: Rods

        Board Length: 49.8mm

        Mounting Hole Diameter: 3.5mm

        Distance Between Mounting Hole: 41mm

        Materials: Nickel Alloys Wire Wound Resistor with Aluminum Case

        Color: Green

        Package Content: 2 pcs 50W 0.8 ohm Aluminum Resistor

        Suggestion:

        a. The load resistor will get huge hot, please don't touch it when the resistor is working.Because resistor is a braking device which transfers Electric energy to Thermal energy.This is a
        normal physical phenomenon.


        b. The load resistor should be mounted on metal board, not on flammable board such as plastic board,rubber,paper,wood and etc.

        c. We recommend a 30%-50% increase in rated power based on your actual load power and add a heat sink device when it is necessary.

        • If you choose a 30% increase in rated power, you must add a heat sink device.
        • If you choose a 50% increase in rated power, you can add a heat sink device for the best use of its performance.


        d. Not recommend to use it for Automotive repair or refit unless you have professional knowledge.

      Item Specifics
      MPNDoes Not Apply
      BrandUxcell
      upc714998091642
      TypeAluminum Resistor
      Manufacturer WarrantyNone
      Termination StyleThrough Hole
      Minimum Operating TemperatureDoes Not Apply
      Tolerance Rating±5 %
      Maximum Operating TemperatureDoes Not Apply
      Resistance Rating0.8Ω
      Hot Item
      • We accept eBay payment.
      • We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended..

      International Buyers - Please Note:

      • Import duties, taxes and charges are not included in the item price or shipping charges. Buyers are responsible for these charges.
      • Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
      • Note that delivery times may vary, particularly during peak periods or inclimate weather conditions.
      • All items will be dispatched from our warehouse in China or Hong Kong directly.
      • We will ship worldwide EXCEPT Italy, Nigeria, Vietnam, India, Indonesia, Malaysia, Philippines, Thailand, India, China, Hong Kong, Macau Due to Custom restrictions, we do not ship lighters to US We cannot ship on weekends and we do not offer Saturday, Sunday or holiday delivery.
      • All our items will be shipped to buyer's PayPal address, please confirm your address on PayPal before you bid.
      • Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
      • If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
      • Buyers are responsible for the return shipping costs under any circumstances.