Special, acoustically transparent cloth for covers, masking frames, loudspeaker frames.
The cloth from this auction can be used in speakers of the leading European audio brands such as:
The products on our auctions will easily and quickly enable you to renew your favorite speaker system.
The loudspeaker grill is torn, riddled or simply faded over time? This solution is perfect for you!
Perfectly fits to:
• High stretch: Yes
• No sound attenuation: Yes
• UV resistance: Yes
• Colour: BLACK / WHITE / GRAY / GRAPHITE / BROWN
• Dimensions of one piece: 0.5 m x 2 m / 50 cm x 200 cm / 78,74" x 19,69" / 6.56 ft x 1.64 ft
We ship worldwide!
We ship parcels every day from Monday to Friday.
Express delivery.
Note1: Glue is not part of the sale of this auction. A set of cloth with glue is available at our other auction.
Note2: The width of a piece of speaker grill cloth is 2 m. If you want to buy eg. A piece of 3m x 2m, you need to buy 6 pieces, and of course, we send the whole in one piece.
1. Take off the old grill cloth.
2. After removing the old cloth completely, measure the size of the speaker grill.
3. Cut the cloth for the intended size of the speaker grill. Our cloth is very flexible and forgives mistakes in accidental bad measuring (tolerance up to a dozen or so centimeters depending on the length).
4. To improve the quality of combining, first apply the first layer of glue around the edge with the brush and wait until it dries completely (the glue is quickly drying).
5. Put the cloth on a flat surface, and then put on it a frame of the speaker grill.
6. Start gluing from the shortest sides. Spread the glue evenly with a brush on one of the edges.
7. Put the cloth on half-dried glue, so that the cloth does not wrinkle.
8. Press the edge with your fingers for 30 seconds. (points 7 and 8 apply to gluing each side).
9. Lubricate the glue on the edge which is opposite the first glued side, pull the cloth and stick it to the edge.
10. Proceed adequately with the other long sides.
11. After gluing all sides, excess material will be formed.
12. Cut the fabric at the very edge.
13. After a few minutes of work, you can enjoy the refreshed look of your speakers.