7443 7440 T20 2800LM 50W CREE LED Backup Reverse Light Bulb Super White 6000K X2

Wedge bulb type: 580 (W21/5W)
Qty Included: 2 bulbs
Colour: White
Technology: Led
Wattage: 50W
Voltage: 12v
Guarantee: 12 months

-Good light type, Low power consumption and super bright lighting,the position of the light-emitting point is close to the original car halogen lamp

-No delay to light up, Faster on/off response time, low power consumption and high lighting,Good Quality And Durable,Easy to Install,Good Feel

-Lifespan: Up to 50,000 hours working hours ,Adopt imported chips emit 360 degree light can light up every corner, stable quality, long service life

-The model is as the same as factory light, no need to change car wire rute,just Plug and Play, NO modification required A direct replacement part that easy to install

-With High-purity brightness, strong penetrability and superior stability,Energy saving, environmental protection, through strict test, Use safer driving in the car,highly recommended.

Parameter:
Cross Reference: 7443 7440 7441 7444 W21W T20 etc.

Usage: Backup Reverse Light

LED Quantity：10PCS/per bulb, 20PCS/per bulb Set
Lumens：1400Lm/per bulb, 2800LM/per bulb Set

Power：50W/per bulb, 100W/per bulb Set
Color Temperature：6000K Xenon White
Waterproof Level：IP65 Waterproof & Shockproof

Beam Type：360°Beam Angle
Certified by：CE & ROHs

Work Voltage: DC 12V

Warranty：1 YEAR
Lifetime:More than 50000 hours
Suitable For Pickup, Wagon, UTB, Cab, ATV, SUV, Jeep, Truck, Bus etc.

Package：2x 7443 LED Backup Reverse Light Bulb

Attention:
1.CANBUS ERROR FREE: No. For most vehicles, just directly plug and play. Yet for some vehicles with CAN-BUS system, it may require install decoder or load resistor (NOT included) to avoid hyper flash or fast blinking.Those are NOT problems of LED bulb and NOT covered by warranty. (decoder must be purchased separately)
2.Please check your manual or original bulb to confirm the correct bulb size& length before purchasing to same your time.

Q1: Will this bulb fit my vehicle?
A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include partial vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.

Q2: My item has not arrived, what's taking so long?
A: Sometimes items take longer than expected, especially if it’s going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap.

Q3: Do I need to mention the Year, Make and Model in the notes when place order?
A: YES. Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit!

Q4: My bulbs won't fit, help!
A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know.
The bulb size may be wrong, double check the item you received with the item you ordered.
Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.

Q5: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.

Q6: WARNING ABOUT POLARITY
Unlike halogen bulbs, LED are polarity sensitive.
BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
- if your light turns on, please proceed to install both bulbs onto your vehicle.
- if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.