• Features:
  •  
  • 1. Application: Fit for Trim Caps on ALL SHOWA manufactured Trim/Tilt Units, All Suzuki, Honda, Johnson, Evinrude, ALL Yamaha I4 2.8L (F175-F200), ALL Yamaha VMAX, Yamaha F115-F150, Yamaha 2-Strokes (115-225hp)  
  • 2. Function: To rebuild a leaked device on outboard engine, hydraulic trim and tilt unit. Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder.  
  • 3. A Must Have: Usually, you will put a little drift into one of those holes in the trim and tilt caps with a hammer. Then, you destroy these cap, you will thrown them away, which cost a about hundred bucks. So, you really need the pin wrench to help you finish that case with ease.  
  • VISA-POWER

    Trim Tilt Pin Wrench AMT0006 - 32mmx4mm for Yamaha Suzuki Johnson Evinrude

    Features:

     

    1. Application: Fit for Trim Caps on ALL SHOWA manufactured Trim/Tilt Units, All Suzuki, Honda, Johnson, Evinrude, ALL Yamaha I4 2.8L (F175-F200), ALL Yamaha VMAX, Yamaha F115-F150, Yamaha 2-Strokes (115-225hp)
     

    2. Function: To rebuild a leaked device on outboard engine, hydraulic trim and tilt unit. Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder.
     

    3. A Must Have: Usually, you will put a little drift into one of those holes in the trim and tilt caps with a hammer. Then, you destroy these cap, you will thrown them away, which cost a about hundred bucks. So, you really need the pin wrench to help you finish that case with ease.
     

    4. High Quality Material: Made of high hardened 4140 impact grade steel, with silver oxide coating which is rust-resistance and durable to use. Better than OEM.
     

    5. Satisfaction Guarantee: If you're not 100% satisfied with this pin wrench MT0006, simply return it for a full refund in 30 days, guarantee with 12 month's warranty.

     

    Descriptions:

     

    Outboard Trim/Tilt Pin Wrench MT0006-32mm x 4mm

     

    FITS:
    -Fits Trim Caps on ALL SHOWA manufactured Trim/Tilt Units
    -Trim Caps on Yamaha F115-F150
    -Trim caps on ALL Yamaha I4 2.8L (F175-F200)
    -Trim Caps Yamaha 2-Strokes (115-225hp)
    -Trim Caps on ALL Yamaha VMAX
    -Trim Caps All Suzuki, Honda, Johnson, Evinrude

     

    Function:
    Rebuild the trim seal on the trim and tilt unit. Used to remove and install the trim caps without damage.

     

    Yamaha Factory Tool: YB-06175-1A, YB-06548
    -1/2" Socket Drive
    -180 ft-lb MIN Pin Strength
    -Same as Yamaha Factory Tool: 
    -Replaceable Pins (AMT0005 - S-4mm)
    -Fits Trim Seals on Yamaha, Suzuki, Johnson, Evinrude, Honda Outboards

     

    Package Included:

     

    1 x Trim Pin Wrench AMT0006-32mm x 4mm



    Payment

    1. Payment methods accepted: Payoneer.  Our Payoneer account allows you to pay by credit card, debit card and your paypal balance.

    2. All major credit cards are accepted through our secure payment processor Payoneer.

    3. We ship items to Your Ebay address.Please make sure your Ebay address is correct  before you pay, cause it cannot be changed once the order shipped out.

    Shipping

    1. Item will be shipped out within 1-2 business day after clear payment received.

     

    2. Please make sure shipping address on your Ebay account is correct & up-to-date.

     

    3. All of our items are shipped from our US warehouse.

     

    4. Please feel free to contact us by email if you cannot get your order in time.

     

     

    Please read the shipment and payment detail carefully before you bid.

     

    Returns

    1. Return to us within 30 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).


    2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all non seller mistake returns for refund are subject to 20% re-stocking fee.


    3. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.

     

    Contact Us

    Please contact us via ebay using"Contact member". 

    We will respond within 1 business day or less.Thank you for your understanding.

    Our office hours is as below :


    - 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday
    - 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday

     


    And our office is closed on Sunday and public holidays (Hong Kong)
    We apologize for the late reply during the holidays.Please contact us via ebay using"Contact member".

    We will respond within 1 business day or less. 

    Please include your ebay item number or order number in all communications.

    VISA-POWER

    High Recommended
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    Trim Tilt Pin Wrench AMT0006 - 32mmx4mm for Yamaha Suzuki Johnson Evinrude

    Features:

     

    1. Application: Fit for Trim Caps on ALL SHOWA manufactured Trim/Tilt Units, All Suzuki, Honda, Johnson, Evinrude, ALL Yamaha I4 2.8L (F175-F200), ALL Yamaha VMAX, Yamaha F115-F150, Yamaha 2-Strokes (115-225hp)
     

    2. Function: To rebuild a leaked device on outboard engine, hydraulic trim and tilt unit. Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder.
     

    3. A Must Have: Usually, you will put a little drift into one of those holes in the trim and tilt caps with a hammer. Then, you destroy these cap, you will thrown them away, which cost a about hundred bucks. So, you really need the pin wrench to help you finish that case with ease.
     

    4. High Quality Material: Made of high hardened 4140 impact grade steel, with silver oxide coating which is rust-resistance and durable to use. Better than OEM.
     

    5. Satisfaction Guarantee: If you're not 100% satisfied with this pin wrench MT0006, simply return it for a full refund in 30 days, guarantee with 12 month's warranty.

     

    Descriptions:

     

    Outboard Trim/Tilt Pin Wrench MT0006-32mm x 4mm

     

    FITS:
    -Fits Trim Caps on ALL SHOWA manufactured Trim/Tilt Units
    -Trim Caps on Yamaha F115-F150
    -Trim caps on ALL Yamaha I4 2.8L (F175-F200)
    -Trim Caps Yamaha 2-Strokes (115-225hp)
    -Trim Caps on ALL Yamaha VMAX
    -Trim Caps All Suzuki, Honda, Johnson, Evinrude

     

    Function:
    Rebuild the trim seal on the trim and tilt unit. Used to remove and install the trim caps without damage.

     

    Yamaha Factory Tool: YB-06175-1A, YB-06548
    -1/2" Socket Drive
    -180 ft-lb MIN Pin Strength
    -Same as Yamaha Factory Tool: 
    -Replaceable Pins (AMT0005 - S-4mm)
    -Fits Trim Seals on Yamaha, Suzuki, Johnson, Evinrude, Honda Outboards

     

    Package Included:

     

    1 x Trim Pin Wrench AMT0006-32mm x 4mm



    1. Payment methods accepted: Payoneer.  Our Payoneer account allows you to pay by credit card, debit card and your paypal balance.

    2. All major credit cards are accepted through our secure payment processor Payoneer.

    3. We ship items to Your Ebay address.Please make sure your Ebay address is correct  before you pay, cause it cannot be changed once the order shipped out.

    1. Item will be shipped out within 1-2 business day after clear payment received.

     

    2. Please make sure shipping address on your Ebay account is correct & up-to-date.

     

    3. All of our items are shipped from our US warehouse.

     

    4. Please feel free to contact us by email if you cannot get your order in time.

     

     

    Please read the shipment and payment detail carefully before you bid.

     

    1. Return to us within 30 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).


    2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all non seller mistake returns for refund are subject to 20% re-stocking fee.


    3. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.

     

    Please contact us via ebay using"Contact member". 

    We will respond within 1 business day or less.Thank you for your understanding.

    Our office hours is as below :


    - 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday
    - 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday

     


    And our office is closed on Sunday and public holidays (Hong Kong)
    We apologize for the late reply during the holidays.Please contact us via ebay using"Contact member".

    We will respond within 1 business day or less. 

    Please include your ebay item number or order number in all communications.


    All right reserved.