|
Features:
-
This time delay relay can be powered with low voltage, minimum to 3V.
-
Commonly-used 3.7V lithium batteries, 5V power banks, switching power supply can be used to power this board.
-
Widely used to control motors, light bulbs, LED belts, DC motor, small pumps, etc.
-
Output optical coupling isolation improves anti-interference ability.
-
The module uses industrial circuit board, and set parameters will be saved after power failure.
Specification:
Working current: DC 3V~7V
Voltage range with jumper: 3 V~5.5V Voltage range without jumper:
3.8V~7V
source: DC 3V~12V (commonly use power supply positive , button, PNP sensor, PLC , etc.)
Output capacity: Can control equipment within DC 30V3A or AC 220V3A
Quiescent current: 15mA Working current: 30mA
Service life: >100,000 times
Operating temperature: -40℃~85℃
Size: 64.2*34.8*15mm / 2.5*1.4*0.6in
Weight: 22g / 0.8oz (approx.)
Package list:
1 * Module
Function:
Delay time range:Minimum 0.1 seconds, maximum 999 minutes, .
P-1: relay is energized, and when time is over, relay is de-energized; during the period of delay:
A: again is invalid B: again can start a new timing C: again will cause relay to reset and end timing
P-2: starts timing for T1, when time is over, relay is energized for T2 then de-energized (reset)
P-3: Cycle:Energized for T1, de-energized for T2, infinite cycle.Time of T1 and T2 are both .
A: After powered on, relay is first energized then de-energized for a infinite cycle B:After powered on, relay is first de-energized then energized for a infinite cycle
P-4: When there is , relay is energized; when disappears, it start timing, and relay is de-energized when time is over. During the period of delay, if appears again, it cancels delay; and when disappears, it start timing again.
Mode selection: After powered on, press and hold K1 button for 2 seconds, then press K1 to enter select mode P1~4, K2 enter the model.
P-1: relay is energized, and when time is over, relay is de-energized; during the period of delay:
A: is invalid B: again can start a new timing C: again will cause relay to reset and end timing
P-2: starts timing for T1, when time is over, relay is energized for T2 then de-energized (reset)
P-3: Cycle: Energized for T1, de-energized for T2, infinite cycle.Time of T1 and T2 are both .
A: After powered on, relay is first energized then de-energized for a infinite cycle B:After powered on, relay is first de-energized then energized for a infinite cycle P-4:When there is , relay is energized; when disappears, it start timing, and relay is de-energized when time is over. During the period of delay, if appears again, it cancels delay; and when disappears, it start timing again.
After selection of work mode, press K1 to enter subtle adjustment setting of function, namely switch among A, B, C.
Setting time instructions:
K2: The button:Press to adjust the flashing position of the display, K3 will adjust whichever flashes.Until press K2, display stops flashing.
K3:When display flashes, K3 adjust digits, 0 to 9 in turns.
When display does not flash, K3 adjust decimal point position: the decimal point in the units position indicates 0 to 999 minutes;in the "tens" position indicates 0 to 99.9 seconds;no decimal point indicates 0 to 999 seconds.
Note:Function P-2 and P-3 have two groups of time that need adjustment; press K2 for six times is a cycle, first three times adjust a time, last three times adjust another time.(blue light on indicates setting the relay energized time, blue light off indicates setting the relay de-energized time.)
-
We accept .
-
We ship item to your
verified address.
-
Payment must be received within 3
days from the date of purchase.
-
All the items will be dispatched
within one business day by Airmail after the payment is clear.
-
Most times you will receive your
order within 10-30 business days after we transfer your package to
the delivery company. We cannot guarantee the delivery timeframe if
the post office has any unexpected delays due to holiday, weather,
customs, or other conditions. Some countries like Russia, Brazil, or
some European countries may take up to 50 days or longer for
delivery.
-
We appreciate your patience if you
haven't received items in 30 days(Russian customers may need more
patience by reason of the local delivery system and/or customs). If
you are concerned in any way, please feel to contact us via
ebay message instead of leaving
negative/neutral feedback or opening a dispute. We will
do our best to solve any problem(resend or refund any missing
item).
-
Customs duty is obligation and
liability of citizens in your country, so buyer should be
responsible for any tax and custom duty incurred. Generally, the
delay or failure delivery is sometimes caused by the policy of
different customs.
 
1. Our listing price includes the value of goods,packaging cost,and export taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3. The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase.
4. All disputes arising from the duties will be submitted to ebay for solution.
1. Any questions, pls. contact us via ebay message or email us.We
will reply your message within 48 hours. If you do not receive our
reply within 48 hours, pls. post a message again because sometimes our
message system may block some emails.
2. If you are satisfied with our service, pls. kindly leave us a
positive feedback and give us the Detailed Seller Rating with all "5 " in very area
3. Our aim is to provide Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy.
We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.
|
