Sonic Electronix Ebay - Cerwin-Vega V468 + Sound Deadening and Roller
Cerwin-Vega V468 + Sound Deadening and Roller
800W Max (150W RMS) 6" x 8" Vega Series 2-Way Coaxial Car Speakers + NVX SDSK2
Cerwin-Vega V468, SDSK2, SDRLR1: alternate picture
Cerwin-Vega V468, SDSK2, SDRLR1: alternate picture
Cerwin-Vega V468, SDSK2, SDRLR1: alternate picture
Cerwin-Vega V468, SDSK2, SDRLR1: alternate picture
Cerwin-Vega V468, SDSK2, SDRLR1: alternate picture
Cerwin-Vega V468, SDSK2, SDRLR1: alternate picture
Cerwin-Vega V468, SDSK2, SDRLR1: alternate picture
Cerwin-Vega V468, SDSK2, SDRLR1: alternate picture
Cerwin-Vega V468, SDSK2, SDRLR1: alternate picture
Cerwin-Vega V468, SDSK2, SDRLR1: alternate picture
Cerwin-Vega V468, SDSK2, SDRLR1: alternate picture
Cerwin-Vega V468, SDSK2, SDRLR1: alternate picture
0
1
2
3
4
5
6
7
8
9
10
11
Cerwin-Vega V468 + Sound Deadening and Roller

Cerwin-Vega V468

800W Max (150W RMS) 6" x 8" Vega Series 2-Way Coaxial Car Speakers
Quantity: 1

Product Details:

  • 6" x 8" Vega Series 2-Way Car Speakers
  • Power Handling:
    • Peak: 800 watts per pair / 400 watts each
    • RMS: 150 watts per pair / 75 watts each
  • Mica fiber composite cone
  • Vega Red rubber surround
  • 1" Titanium dome tweeter
  • Top-mount Depth: 2.85"
  • Cutout Dimensions: 5.2" x 7.362"
  • 4 ohms impedance
  • Frequency Response: 55 - 20000 Hz
  • Sensitivity: 94dB
  • Also available in different sizes:
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

  • Priced Per Pair


NVX SDSK2 - 90mil 2.3mm THICK

Speaker Kit - 1.38 Square Feet of Sound Damping (Sound Deadening) Material (Two 10" x 10" Pieces)
Quantity: 1

Product Features

  • Two 10" x 10" Pieces of Sound Dampening Material
    • 90.55mil thick (2.3mm)! There are cheaper, inferior solutions at 50-80mil, but we do not recommend that thin of a solution as it will not perform as well.
  • Great sound damping for installing with car door speakers
  • 1.38 Square feet total
  • Made from 100% Butyl Rubber
  • Eliminates road noise
  • Quiets vibrations
  • Increases sound quality and output of car audio system
  • Stops rattles
  • Increases SPL
  • Reduces heat
  • Easy to form aluminum conforms to desired area of vehicle with ease
  • Four step peel and stick design for easy installation
  • Up to 30% thicker than the leading competitors
  • Dimensions (each piece): 10"L x 10"W
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty




How to Install Sound Damping Properly

Sound damping can be a very beneficial accessory to reduce noise and vibration. To take full advantage of this soundproofing, read these instructions carefully and follow them till the end. It’s important to familiarize yourself with all the details to install the sound damping correctly. Incorrect installation will result in less than desirable results.

Step #1

The first step is to decide which location in your car you want to insulate. These locations include the floorboards, roof, door panels, trunk or firewall. We recommend soundproofing all metal surfaces for maximum sound deadening performance. Next, refer to your vehicles service manual for information on how to dismantle the trimming panels. Be careful when removing the panels to avoid breaking the fixing clips.

Step #2

Once the trimming is dismantled, remove the remainder of the factory insulation if it is damaged. If it is still intact, there is no need to permanently remove it. Next, you need to properly clean, dry and degrease the prospective surface. Sound deadening won't adhere properly if applied to a wet or dirty surface. Use a metal surface cleaner or degreaser along with a dry, clean rag. Make sure to use gloves and apply the degreaser in a well-ventilated space.

Step #3

For this step, measure the prospective surface you are going to treat. To make things easier, make a template of the appropriate size on a large sheet of paper and then transfer it to the damping material. That will make it easier to install it more accurately and avoid wasting material. Use a utility knife to cut the desired shape and size. Be careful and use gloves to protect your hands.

Step #4

Place a sheet of sound damping to the surface without removing the protective film. If it covers the surface properly, you are ready to install it. Gradually remove the protective paper film as you apply it to the surface for better adhesion. Once on the surface, press it down firmly until it is set in place. Flatten it with your hands to avoid unnecessary air bubbles. Use a rolling tool like the NVX SDRLR1 to press the mat down to the metal surface. Go across the entire surface with the roller to ensure that the sheet is installed properly.

Step #5

Once all sound deadening is in place, simply reinstall all trim pieces and carpet back to its original placement. Now you are ready to enjoy higher sound quality with fewer vibrations.

NVX SDRLR1 Sound Dampening Rubber Roller

Universal, Professional Heavy Duty Roller for Sound Damping (Sound Deadening)
Quantity: 1

General Features

  • Universal - works with NVX and other brands
  • Professional, Heavy Duty Roller Tool (used at car stereo shops worldwide)
  • 2" Solid Rubber Roller
  • Contoured wood-grip handle for comfortable handling
  • Soft Urethane Rubber Won't Scratch Surfaces
  • Thick Plated Steel Frame
  • Sturdy wood and metal construction for durability
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty


International customers are responsible for any and all customs, import duties, brokerage fees, and taxes. They are not included in the item price or stated shipping charges.

Additional shipping fees are required for locations including, but not limited to: PO Boxes, APO/FPO locations, Alaska, Hawaii, Puerto Rico, Guam, Canada and other countries outside the USA.

Product Summary
Manufacturer:
Model number:
V468, SDSK2, SDRLR1
Weight:
8.30 lbs
Internal SKU:
v468_sdsk2
Internal Product ID:
181285
© 2000–2021 Sonic Electronix, Inc. - 10645 Freeport Drive, Louisville, KY 40258 USA
All manufacturer names, model numbers, pictures and product descriptions are for the sole use of describing the product(s) for sale.
All trademarks and trade names are the property of their respective trademark holders.
Prices, specifications, and images are subject to change without notice.