Packing include：
21pcs Paintless Dent Repair RODS (5A+10B+6C)
1pc Paintless Dent Repair Light Board
1pc Dent Lifter
1pc 100W Glue Gun
1pc Metal Tap down with 9 heads
5pcs White Tap Down
40pcs Pro Glue Sticks
56pcs Pro Tabs
1pc T-bar Puller
1pc T-Slide Hamer
1pc Tap Down Hammer
1pc Rubber Hammer
1pc Slider Hammer Lifter
1pc Bridge Puller with 7 Pulling Tabs
1pc Tool bag
1pc Yellow shovel
1pc bottle
1pc blue clean cloth
2pcs Repair wedge
2pcs Pump wedge
Professional paintless dent repair tools hail damage repair kit,perfect for door dings and hail damage.
WHDZ Paintless Dent Repair Tools are made from several types of Stainless steel. Tempered high carbon Stainless steels and standard stainless steel are used depending on the design of a particular tool.
Easy To Control-DIY can removal the dent by yourself,Suitable for any person to operate,It has the advantages of simple operation, repair the dent for you directly.
Outstanding Design And Smooth Texture Feel-Our dent lifter is our PATENTED products,on the bottom of which is silicone, not ordinary rubber,
which is very soft and not harmful for oil paint and can be teared down.the product is very strong and durable.
Our Paintless Dent Repair Tool is suitable for the sheet metal processing of automobile,refrigerator,and washing machine.
Packing include: Paintless Dent Repair RODS, Paintless Dent Repair Light Board, Dent Lifter, 100W Glue Gun, Metal Tap down,
Glue Sticks. Glue Tabs, Dent Puller Slide Hamer, Rubber Hammer, Rubber Hammer, Dent Lifter, Shovel, Bottle, Clean cloth. Repair wedge.
1. Find the dent by the line board ( through the refraction of light )and clean it with rag and alcohol.
2. Then clean the glue stick with alcohol to remove the grease on its surface.
3. Insert the glue into the glue gun and connect the gun to the power supply , then heat it about 2-5 minutes until there is some hot glue spilling out from the gun.
4. Choose a tab whose shape is the most similar to the dent and pay attention to the hot glue which should begin from the centre of the tab ,
and with the circle action to smear it cover the tab, but should not overstep . ( The tab bigger the traction stronger , so if the dent is big , you should choose a big tab . )
5. You should quickly paste the tab to the dent and press it until the hot glue is firmed.
6. Fasten the Dent Lifter or T-shaped Repairer or Hammer or Bridge Puller and hold its two handles, up and down with power gradually ,
repeat your action until the dent is repaired or flatted , and don’t let the tab go off the car body. What’s more, you should pay attention to your power and not be rushed .
7. After repaired, spray the adhesive remover on the part where covers glue and remove it with a scraper .
8. Check the repair effect again, if not very well , please repeat the above steps until be repaired. Recommend these tools. DIY is much cheap than body shop.