• Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy.
• 4LB. Density polyurethane flotation Foam Quart Kit; Consists of 1 pint of Part A and 1 pint of Part B and produces 1/2 cubic foot.
• Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting.
• The 4LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications
• All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes

This 4LB density foam is suited well for most flotation applications that require more support than the 2LB offers.
This foam is recommended to be used when supporting gas tanks and some deck areas.
Choose this density if you feel that the foam will be required to withstand minor to moderate loads.
The 4LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications.

*Kit includes one (1) pint of Part A, one (1) pint of Part B