eBay

Please select the type you want from the drop down list.

PLEASE READ THE BELOW BEFORE YOU ORDER ELSEWHERE!

I will post by 1st Class Royal Mail on the SAME DAY of your order if received before cut-off at 2pm.

IF YOU ARE NOT SEEING THE ITEM YOU WANT IN STOCK THEN PLEASE EMAIL ME - I CAN USUALLY MAKE THESE UP WITHIN A DAY.

Please note that the resistor and capacitor are soldered, not just twisted together. It's important to note that it is twisted and soldered, which means that the resistor won't fall off when the solder heats up when you solder the treble bleed to the volume pot.

All ceramic capacitor kits are made with 22AWG thick wire soldered to them. This makes the kit much more sturdy and easier to install. Ceramic capacitors are very delicate, and are otherwise very flimsy due to the very thin wires. We prefer to use Sprague or Mylar Poly Film capacitors where possible, but because some values are not available in these capacitor types, we need to use ceramic capacitors that we solder onto thick wires for this reason.

Universal All-Rounder (Mylar) 1nF/150KΩ

1nF 100V Mylar Polyester Film Capacitor ±5% (1nF is the same as 0.001µF (Microfarad), and 1000pF (Picofarad))

150kΩ Metal Film 0.25W Resistor ±1% in parallel

Universal All-Rounder (Sprague Orange Drop) 1nF/150KΩ

1nF 600V Sprague Orange Drop ±10% (1nF is the same as 0.001µF (Microfarad), and 1000pF (Picofarad))

150kΩ Metal Film 0.25W Resistor ±1% in parallel

Bill Lawrence Type 330pF/82KΩ

Ceramic 330pF Capacitor

82kΩ Metal Film 0.25W Resistor ±1% in parallel (Bill Lawrence traditionally use an 80KΩ resistor, but these are very difficult to source - this is close enough!)

Mojo Tone Type 471pF/220KΩ

Ceramic 471pF Capacitor

220kΩ Metal Film 0.25W Resistor ±1% in parallel

DiMarzio Type 560pF/300KΩ

Ceramic 560pF Capacitor

300kΩ Metal Film 0.25W Resistor ±1% in parallel

Suhr Type 680pF/150KΩ

Ceramic 680pF Capacitor

150kΩ Metal Film 0.25W Resistor ±1% in parallel

(this is the same as the Cort spec below, but is listed separately for ease of ordering)

Cort Type 680pF/150KΩ

Ceramic 680pF Capacitor

150kΩ Metal Film 0.25W Resistor ±1% in parallel

(this is the same as the Suhr spec above, but is listed separately for ease of ordering)

TVJones Single Coil Type 1nF/150KΩ

1nF 100V Mylar Polyester Film Capacitor ±5% (1nF is the same as 0.001µF (Microfarad), and 1000pF (Picofarad))

150kΩ Metal Film 0.25W Resistor ±1% in parallel

(this is the same as the Universal All-Rounder (Mylar) 1nF/150KΩ spec above, but is listed separately for ease of ordering. You can also choose the Sprague Orange Drop version for TV Jones Single Coil)

TVJones Humbucker Type 2nF/150KΩ

Ceramic 2nF Capacitor

150kΩ Metal Film 0.25W Resistor ±1% in parallel

Fender Type 1.2nF/150kΩ/20KΩ

Ceramic 1.2nF Capacitor

150kΩ Metal Film 0.25W Resistor ±1% in parallel, PLUS a 20kΩ Metal Film 0.25W Resistor ±1% in series

Seymour Duncan Type 1nF/100kΩ

1nF 100V Mylar Polyester Film Capacitor ±5% (1nF is the same as 0.001µF (Microfarad), and 1000pF (Picofarad))

100kΩ Metal Film 0.25W Resistor ±1% in parallel

Kinman Type 1.2nF/130kΩ

Ceramic 1.2nF Capacitor

130kΩ Metal Film 0.25W Resistor ±1% in series

Lindy Fralin Type 2.5nF/200KΩ

Ceramic 2.5nF Capacitor

200kΩ Metal Film 0.25W Resistor ±1% in parallel

Octave Doctor 1nF/150KΩ

1nF 100V Mylar Polyester Film Capacitor ±5% (1nF is the same as 0.001µF (Microfarad), and 1000pF (Picofarad))

100kΩ Metal Film 0.25W Resistor ±1% in series

YOU CAN HAVE ANY VALUE OF CAPACITOR AND RESISTOR COMBINATION YOU LIKE. Please just email me and I will supply this to order. Any custom orders may be dispatched the next working day instead of the same day.

We can supply any type to suit your setup. If you need advice on the best values for your specific setup, please email me with your type of pickups and volume pot value.

If you have 2 volume controls on your guitar (e.g. Les Paul, SG, or similar) then you will need 2 kits, one for each volume pot.

The wiring is as per the picture in the listing. The kit is wired from the centre to the hot lug. This is for right-handed pots - for left handed pots it is the reverse.

Please note that you will need some soldering skills to install this.