This is the upgrade version of HoldPeak BT-570C-APP, this upgraded chipset making DC current testing more accurate. 6000Counts display, with Fahrenheit Temperature Testing and True RMS, NCV function.
【Wide Range Clamp Meter】With 6000 counts display, the clamp meter can measure DC/AC voltage;AC/DC current,Resistance,Capacitance,Temperature ,Frequency,Diode Test. The clamp meter has manual/automatic ranging which can adjust the operation method according to your usage habits.The jaw size up to 1.77in/45mm to measure a cable which is thick enough.
【Multi-Function Multimeter】With Data hold, LCD Backlight, Relative value, Continuity buzzer,Connect to Phone by APP. Through the Backlight function, you can measure in the darkness and read the data clearly by the large LCD screen.
【Auto Connect To Your Phone Via Bluetooth】HP-570S-APP clamp multimeter come with APP Supported, you can connect to your smart phone via Bluetooth to monitor clamp meter measurement in real time. With this APP-Multimeter, you can transfer the data and analysis it in real time on your phone. The mobile APP can be installed on iPhone 4S iOS or Android 4.30 or higher.
【Safety & Over Load Protection】HP-570S-APP Clamp Meter is up to the standards of IEC1010 Double Insulation, Pollution Degree 2, Over voltage Category Ⅲ and overload protection. It will show "OL" on the LCD if over range.
- Phone/Tablet APP "AiLink" available on App Store, Google Play.
- Average sensing, calibrated to rms of sine wave on AC Volt, AC Amperage test.
- This AC/DC clamp-on ammeter with app is ideal for remotely troubleshoot electrical problems
- Sync measurement to your phone via Bluetooth APP, display all measurement and generates analog waveform graph on APP
- Default setting to stays on to support continuous measuring, data logging, transfer the data in excel/txt.
- DC current: 600A/1000A±(3.0% +10 digits)
- AC current:600A/1000A±(3.0% +10 digits)
- AC Voltage:6V/60V/600V/1000V ±(1.5% +3 digits)
- DC Voltage: 600mV/6V/60V/1000V( +/- 0.8% + 2 digits)
- Resistance: 600Ω/6000Ω/60KΩ/600KΩ/6MΩ/60MΩ
- Capacitance: 6nF/60nF/600nF/6uF/60uF/600uF/6mF/60mF
- Frequency: 9.999Hz/99.99Hz/999.9Hz/9.999kHz/999.9kHz/9.999mHz
- Temperature Test: -4~1832℉ (-20~1000℃ ), Thermocouple Included
- Data Hold Button
- Duty Cycle
- Diode Test
- Low battery indicator
- Max/Min Valued Mode
- Backlight Display
- Non Contact AC Volt Detector
- 5999 Display Multimeter
BTMETER BT-570S-APP Connect Instructions
1. Scan the QR code or Search “AiLink” on Google Play/ APP Store for download
2. Turn on the Bluetooth on your mobile phone→ Open the APP→ Register the app
3. On the page of "Devices" → press " + " on the top right corner → select "Devices nearby" → "Clamp Meter 27:A5"
4. Press "Start" → Enjoy your measurement.
Tips:
a) To ensure continuous data logging, the Clamp Multimeter won't be auto shutdown, unless the battery is dead
b) You can set the sampling rate from 1 time/minute to 120 times/minute.
c) Make sure press "STOP" on APP after measurement, otherwise the data won't be stored.
| Function | BT-570C-APP | BT-570S-APP |
| Dispaly | 4000 | 6000 |
| APP | Standalone Version | Alink APP |
| DCA | 200A | 600A |
| AC Measurement | TRMS | |
| NCV | NO | YES |
| MAX/MIN | NO | YES |
| Resistance | 400Ω,4000Ω,40KΩ,400KΩ,4MΩ,40MΩ | 600Ω / 6kΩ / 60kΩ / 600kΩ / 6MΩ / 60MΩ |
| Frequency | 5.12Hz,51.2Hz,512Hz,5.12kHz,512kHz,5.12mHz | 9.999Hz/99.99Hz/999.9Hz/9.999kHz/99.99kHz/999.9kHz/9.999MHz |
| Capacitance | 51.2nF, 512nF,5.12uF,51.2uF,100uF | 6nF/60nF/600nF/6µF/60µF/600µF/6mF/60mF |
| DC Voltage | 400mV,4V,40V,400V,1KV | 600mV / 6V / 60V / 600V / 1000V |
| AC Voltage | 4V,40V,400V,750V | 6V / 60V / 600V / 750V |
| DC Current | 200A,1000A | 600A / 1000A |
| AC Current | 400A,1000A | 600A / 1000A |
Adopt Intelligent Bluetooth APP can autoautomatically find your clamp meter,or you can add BT-570S-APP manually in just few seconds.
The App can be used in IOS or Android mobile devices. The App can be used in IOS 7.0 or android 4.30 system and up on Smartphones or
Tablet.
Both AC/DC Volt Amps Clamp Meter
It can accurately measure DCV to 0.1m volt, ACV to 1m volt; DC/AC Current to 0.1 amp; Resistance to 0.1 ohm. Built with “REL” button to zeroing for magnetic environment to make sure you get accurate readings anytime,anywhere.
Remotely Monitor Logging
The app will synchronous display the readings, also with MAX/MIN/Average and measuring time,
it means you can remotely record the readings every 1-120 mins from different floor, ground to roof, within 49ft.
1 * BTMETER BT-570S-APP Clamp Meters
1 * Test Lead
1 * English Manual
1 * Storage Bag
