We Can Customize Your Unique Sword, Hamon Type / Blade Struture& Length / Sori / Fittings / Evgrave / Kissaki Type
Or You Want Replace This Sword Fitting, Please Click Here
Store Categories
Why Buy From Us
Tanto Sword Clay Tempered T10 Steel Real Hamon UNKUBI-ZUKURI Blade Razor Sharp

SWORD SPECIFICATION:

Condition: Brand New

Blade Material: Clay Tempered T10 Steel

Blade Shape:UNKUBI-ZUKURI

Handle Material:Genuine Ray Skin + Hardwooden

Saya Material: Hardwood，Lacquer Work Finished

Fitting Material :High Quality Alloy（Iron Tsuba）

Size：Overall Length: 21.5 inch/55cm，Nagasa Length: 13 inch/33 cm，Handle Length: 6.7 inch/17 cm，Blade Width(near Habaki)： 1.26 inch / 3.2cm

BLADE：

-The Blade Of The Sword Has Been Hand Forged Using The Ancient Method Of Sword Making . Full Hand Forged And Full Hand Polished，UNKUBI-ZUKURI structure blade.

-The Blade Was Made Of T-10 High Carbon Steel, And It Has Been Laminated In A Maru Configuration(Single Type Mono Steel). Differential Hardened And Clay Tempered, Water Quenched And Polished.

-The T-10 High Carbon Steel (The Steel Has A 0.1% Carbon Content And 0.4% Manganese.）Is Very Solid And Holds An Edge Well. This Blade Was Then Clay Tempered And Has More Than 14 Process Hand Sharpening Work. Which Made The Surface Of The Blade Like A Mirror.

-This Blade Has Been Tried And Tested To Cut Everything That Gets In Its Way. The Sori (Blade Curvature) Is Specially Crafted To Create Leverage In Order To Perform The Smoothest And Cleanest Cuts. That In Combination With The Choice Of Traditional And Our Top Selling Koshirae (Fittings), Assures That You Will Get The Best Of Both Appearance And Functionality.

-The Japanese Hamon Pattern Is Done In The Same Process As The Traditional Method. Harden The Edge Is By Using The Special Clay Wrapping The Blade Then Put In Water To Quench. It Requires A Lot Of Skills. The Fire Temperature Can Not Be Too High Or Too Low It Needs To Be Well Controlled By The Sword Smith. The Blade Is Then Put Into Water For Quenching. The Blade Shape Is Done This Process Creates Beautiful Hamon Hada And Martensite (Grains) On The Blade Surface. Clay To Protect The Edge And Quenched In Water To Temper The Mune Or Spine Of The Sword. The Hardness Of The Carbon Steel Measures At An Impressive HRC On The Rockwell Scale. The Perfect Combination Of The Hardness Of The Edge Steel, And The Increased Sori (Curvature Of The Blade), Enables This High Quality Blade To Easily Cut Through Tatami Straw Mats Or Bamboo For Tameshigiri.

FITTINGS:

-This Tsuka is wooden one wrapped with genuine ray skin, and with silk ITO in the traditional wrap.

-The Tsuba made of iron，The Fuchi and Kashira on the tsuka are made of alloy with matching Menuki on each side as an ornament, two Mekugi (peg) are nailed to secure the Tasng of the sword. (Sword can be disassembled by picking up the Mekugi (peg)

-This saya (sheath) of the sword is hard wooden, and lacquered superior paint to highly gloss the surface of it. The Sage-O is tied around the Kurikaka (knob) of the saya, the Koiguchi (scabbard mouth) and Kojiri (scabbard tip) has been hardened.

PACKAGE:

1 x Sword

1 x Sword Bag

NOTE:

1.The wooden stand in below item pictures is NOT included.

2.Please do not store in a humid environment. When the sword is not in use, please keep the blade clean to ensure that there is no water stains, then wipe a layer of maintenance oil to prevent rust. If there is no special oil, use gasoline engine oil.

3.Due to our swords are full hand made, each one is unique，so Specs will vary slightly from sword to sword， please refer to the actual received，please understand.

  • We will ship item by UPS/SF EXPRESS /CHINA POST EMS,Estimated arrival time of the item after it be shipped out;
    United States：7-15 business days
    Other countries：7-30 business days
  • Usually most of items are shipped within 2 days upon payment verification.
  • We will only ship your order to the address that we received from eBay. If you need to change the shipping address, please contact us before item shipped.
  • we will use thick Bubblepak to pack your item, so please do not worry about long-distance transport.
  • Import duties are not included in the item price or shipping charges. These charges are the buyer’s responsibility.
  • Customers from Germany and Italy may need pay Custom duties.
  • You must be over 18 years old to purchase our swords.
  • Please contact us to fix the problem before leaving a negative feedback (Negative feedback can't solve any problem). We will do whatever reasonable to resolve your problem as long as we are given the opportunity
  • Buyer can claim return items if our items are not as described after received items during 7 days.
  • We are one of the leading manufacturers in China, specializing in researching, producing and selling katana swords. High quality and low price let you spend the least money to buy the most favorite sword, We value every customer and strive to do a good job of every sword, welcome to order.
  • You can design your sword.All our sword can change Tsuba(handguard), Sageo/ito, Saya and other sword accessories. we also can customize the blades unsharpened if you don't want very sharp blade , in addition, in order to make your sword more unique, we can engrave your name, simple symbol or something else you like on the blade. one word, we can customize blade shape/blade material /blade sharpness/Length（shorten or longer blade/sword handle) and any you like.Welcome to you contact us by eBay message.
  • The best way to contact us is by eBay messages.
  • We always reply eBay messages that are sent to us with an inquiry, usually within 24 hours of receipt or sooner. We will answer all eBay messages during our business hours. (Monday - Sunday 9:00 am to 6:00 pm China except all Holidays)
  • Please do not leave any low detailed seller ratings, neutral or negative feedback before contacting us.
We commit you 100% satisfaction guarantee.