Applications

High-pressure air pump is widely used in  car tire inflation, hovercraft inflation, air cushion toy inflation, balloon inflation, PCP airgun, rifle,paintball etc.

Features

1.2000W full copper core motor, strong power, stable and reliable. Equipped with overload protection, the machine will overheat, and the overloaded machine will automatically stop to prevent the machine from being damaged.

2.The cylinder body is integrally formed with carbon ceramic, which is sturdy and durable, and is matched with a ringless alloy piston. The cylinder has little wear and tear, good air tightness and long service life.

3.The high-pressure check valve adopts all-copper check valve, which has high temperature resistance and good air tightness. With the explosion-proof valve, the pressure in the machine exceeds 30MPA and the pressure will be automatically relieved, which makes the use of the machine safer.

4.Inflation speed of 0.13L / min (under 30MP pressure). It takes 8 minutes to fill 1L and 55 minutes to fill 6.8L.

5.Equipped with external oil-water separator. Digital display of working temperature makes it more convenient to use.

Note:Warranty policy: The whole machine is guaranteed for 2 years, excluding consumable parts and machine damage caused by improper operation

Technical Support

Notice:

1.Please and add lube oil into the compressor, and install(replace) tang breath plug before running the machine.

2.The machine is zero pressure start, before starting, please release the decompression screw. If there is pressure in your cylinder, do not open the valve until the pressure of the machine is equal to or greater than the pressure of the cylinder.

3.When the compressor working, the cooling system must be working at the same time.

4.During working, if the temperature of machine is too high, it will stop working until his temperature returns to normal level. If you want the machine to work long times, please prepare two barrels of 30KG cooling water. When the temperature of the machine reaches 60 degrees Celsius, replace it immediately

5.If the machine vibrates violently, please add pad or towel under the compressor

6.Please remember to pay attention to the level of oil every time before start.

7.The machine needs to be beside the machine when it is working, and the machine needs to be turned off when the inflation reaches the maximum pressure.

1PCS Inflatable high-pressure pump

1PCS Water pump

2PCS Pump hose

1PCS Water separator

1PCS Hose

2PCS Pressure relief valve screw

1PCS Fuel tank breathing filter

1PCS Power cable

2PCS O-ring (spare)