0.49 inch I2C White
Features:
This is a 0.49 inches OLED display module of 64x32resolution in which the emissive electroluminescent layer is a film of organic compound that emits light in response to an electric current.
Working without backlight, the OLED display module could give out light by itself.
In low ambient light conditions such as a dark room, an OLED screen can achieve a higher contrast ratio than an LCD.
OLED display module also has a much faster response time than an LCD.
The display with small dimension is suitable for MP3, function cellphone, smart health device, etc.
Specifications:
Display Size: 0.49in
Resolution: 64*32
Text Color: White
Driver IC: SSD1306
Interface Type: IIC
Pin Quantity: 14Pin
Pixel Size: 0.155*0.155mm
Operating Temperature: -40~85℃
Working Voltage: 3.3V
Package Includes:
1 x OLED Display Module
Note: This kit requires certain professional knowledge and ability, please make sure you know how to wire and use it.
0.69 inch I2C White/Blue
Description:
OLED display, no need backlight, self-illumination, the display performance is better than the traditional LCD display, also lower consumption.
Size: 0.69 inch OLED
Resolution: 128 x64
Display Color: White/Blue（Optional）
Package Includes:
1 x 0.69”OLED Display Module
0.91 inch I2C White/Blue
Description:
OLED display, no need backlight, self-illumination, the display performance is better than the traditional LCD display, also lower consumption.
Driver IC: SSD1306
Size: 0.91 inch OLED
Resolution: 128 x 32
IIC interface
Display Color: White/Blue（Optional）
Pin Description:
GND: Power Ground
VCC: Power + (DC 3.3 ~5v)
SCL: Clock Line
SDA: Data Line
0.91 inch SPI White/Blue
Features:
Driver IC: SSD1306
Size: 0.91 inch OLED
Resolution: 128 x 32
Font Color: White/Blue（Optional）
Voltage: DC 3.3-5V
PIN Interface: SPI
OLED display, no need backlight, self-illumination, the display performance is better than the traditional LCD display, also lower consumption.
SPI Pin definition:
GND: Power ground
VCC: Power
CLK: Clock line
MOSI: Data cable
RES: Reset line
DC: Data/commands
CS: Chip select (when not use can be grounded directly)
0.96 inch I2C White/Blue/Yellow and Blue
Features：
No backlight, the display unit can be self-luminous
High resolution: 128 * 64
Viewing angle:> 160 °
Supports many control chip: Fully compatible with Arduino, 51 series, MSP430 series, STM32 / 2, CSR chip, etc.
Ultra-low power consumption: full screen lit 0.08W, 0.06W normal full-screen display of Chinese characters
Wide voltage support: without any modification, directly supports 3V ~ 5V DC
Working temperature: -30 ℃ ~ 70 ℃
Module volume (generous): 27.0MM * 27.0MM * 4.1MM
Color:White/Blue/Yellow and Blue（Optional）
Driver IC: SSD1306
No font: take the word with modulo software
0.96 inch SPI White/Blue/Yellow and Blue
Features：
Needn't backlight, the display unit can self-luminous
High resolution: 128 * 64
Viewing angle:> 160 °
Supports many control chip: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
Ultra-low power consumption: full screen lit 0.08W
Voltage: 3V ~ 5V DC
Working Temperature: -30 c ~ 70 c
Module Size: 27.3MM *27.8MM
Color:White/Blue/Yellow and Blue（Optional）
I2C/IIC Interface, need 2 IO only.
Driver IC: SSD1306
Package Included:
1 x 3-5V 0.96" SPI Serial 128X64 OLED LCD LED Display Module Blue Yellow Arduino
1.3 inch I2C White/Blue
Needn't backlight, the display unit can self-luminous
High resolution: 128 * 64
Viewing angle:> 160°
Supports many control chip: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
Ultra-low power consumption: full screen lit 0.08W
Voltage: 3V ~ 5V DC
Working Temperature: -30 ℃ ~ 70 ℃
Color:White/Blue（Optional）
Module Size: 32.0MM*35.50MM*4.1MM
I2C/IIC Interface, need 2 IO only.
Driver IC: SSD1306(https://dl.vmall.com/c0a5f0ybmb) or SH1106(https://dl.vmall.com/c00sl1fyzc)
1.3 inch SPI White/Blue
Needn't backlight, the display unit can self-luminous
High resolution: 128 * 64
Viewing angle:> 160 °
Supports many control chip: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
Ultra-low power consumption: full screen lit 0.08W
Voltage: 3V ~ 5V DC
Working Temperature: -30 ℃ ~ 70 ℃
Module Size: 32.0MM*35.50MM*4.1MM
Color:White/Blue（Optional）
SPI Interface, need 4 IO only.
Driver IC: SH1106
2.23 inch SPI White/Blue
Product Introduction:
1.Size:2.23 inches
2.Resolution:128*32
3.Color:White/Blue（Optional）
4.Interface:68XX,80XX,SPI,IIC
24Pin FPC connection!!!
What is OLED?
OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays.
The use of OLED technology offers the following advantages for flat-panel displays?
- A simplified manufacturing process compared to TFT-LCD (See comparison of Picture 1 and Picture 2 below)
- Self-emitting light, in contrast to the required backlight for TFT-LCD
- High luminosity
- Lightweight and thin (less than 2 mm)
- Capable of wide viewing angles?~180??
- Low operating voltage and power consumption
- Quick response (~ ? second level)
- Wide range of operating temperatures (-40c to 85c)
A Comparison of OLED and TFT-LCD Display Technologies
How Does OLED Emit Light?
OLED"s basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electroluminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components.
Note: If you decide to buy OLED display, you must confirm that you can make it work by yourself, we'll haven't any technology support except all the datasheet. Thanks for your understanding and support