eBay

Cisco UCS 6248UP 48-Port SFP+ Fabric Interconnect Switch UCS E16UP Module

Includes Rack Mount Rails

In Good Condition And Full Working Order

Includes:

1 x Cisco UCS 6248UP 32 Port 1RU Fabric Interconnect/No PSU/32 UP
1 x Cisco 16 Port UCS-FI-E16UP UCS 6200 16-port Expansion module/16 UP
2 x Cisco UCS-PSU-6248UP-AC V02 100-240 VAC Power Supply
2 x Cisco UCS-FAN-6248UP V03 Fan
1 x Cisco Rack Mount Rail Kit

Product Overview

The Cisco UCS 6200 Series Fabric Interconnects are a core part of the Cisco Unified Computing System, providing both network connectivity and management capabilities for the system (Figure 2). The Cisco UCS 6200 Series offers line-rate, low-latency, lossless 10 Gigabit Ethernet, Fibre Channel over Ethernet (FCoE), and Fibre Channel functions.

The Cisco UCS 6200 Series provides the management and communication backbone for the Cisco UCS B-Series Blade Servers and 5100 Series Blade Server Chassis. All chassis, and therefore all blades, attached to the Cisco UCS 6200 Series Fabric Interconnects become part of a single, highly available management domain. In addition, by supporting unified fabric, the Cisco UCS 6200 Series provides both LAN and SAN connectivity for all blades within its domain.

The Cisco UCS 6200 Series uses a cut-through networking architecture, supporting deterministic, low-latency, line‑rate 10 Gigabit Ethernet on all ports, switching capacity of 2 terabits (Tb), and bandwidth of 320 Gbps per chassis, independent of packet size and enabled services. The product family supports Cisco® low-latency, lossless 10 Gigabit Ethernet[1] unified network fabric capabilities, which increase the reliability, efficiency, and scalability of Ethernet networks. The fabric interconnect supports multiple traffic classes over a lossless Ethernet fabric from the blade through the interconnect. Significant TCO savings come from an FCoE‑optimized server design in which network interface cards (NICs), host bus adapters (HBAs), cables, and switches can be consolidated.

Boot Log:

N5000 BIOS v.3.6.0, Wed 05/09/2012, 03:15 PM

Booting kickstart image: bootflash:/installables/switch/ucs-6100-k9-kickstart.5

.2.3.N2.2.26e.bin....

...............................................................................

.................................................Image verification OK

ÿUsage: init 0123456SsQqAaBbCcUu

INIT: [ 10.735576] I2C - Mezz absent

Starting system POST.....

Executing Mod 1 1 SEEPROM Test:...done (0 seconds)

Executing Mod 1 1 GigE Port Test:....done (32 seconds)

Executing Mod 1 1 PCIE Test:.................done (0 seconds)

Mod 1 1 Post Completed Successfully

POST is completed

can't create lock file /var/lock/mtab~207: No such file or directory (use -n flag to override)

S10mount-ramfs.supnuovaca Mounting /isan 3000m

Mounted /isan

Creating /callhome..

Mounting /callhome..

Creating /callhome done.

Callhome spool file system init done.

nohup: redirecting stderr to stdout

autoneg unmodified, ignoring

Checking all filesystems....r.rr done.

Checking NVRAM block device ... done

The startup-config won't be used until the next reboot.

Loading system software

Uncompressing system image: bootflash:/installables/switch/ucs-6100-k9-system.5.2.3.N2.2.26e.bin

Loading plugin 0: core_plugin...

Loading plugin 1: eth_plugin...

Loading plugin 2: fc_plugin...

13+1 records in

13+1 records out

10240 bytes (10 kB) copied, 5.5461e-05 s, 185 MB/s

ethernet end-host mode on CA

FC end-host mode on CA

n_port virtualizer mode.

---------------------------------------------------------------

INIT: Entering runlevel: 3

touch: cannot touch `/var/lock/s

/isan/bin/muxif_config: fex vlan id: -f,4042

Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config

Added VLAN with VID == 4042 to IF -:muxif:-

cp: cannot stat `/isan/plugin_img/fex.bin': No such file or directory

---------------------

enabled fc feature

---------------------

2022 Feb 3 16:29:57 %$ VDC-1 %$ %USER-2-SYSTEM_MSG: CLIS: loading cmd files begin - clis

2022 Feb 3 16:30:01 %$ VDC-1 %$ Feb 3 16:30:00 %KERN-0-SYSTEM_MSG: [ 10.735576] I2C - Mezz absent - kernel

2022 Feb 3 16:30:07 %$ VDC-1 %$ %USER-2-SYSTEM_MSG: CLIS: loading cmd files end - clis

2022 Feb 3 16:30:07 %$ VDC-1 %$ %USER-2-SYSTEM_MSG: CLIS: init begin - clis

System is coming up ... Please wait ...

2022 Feb 3 16:31:10 %$ VDC-1 %$ %VDC_MGR-2-VDC_ONLINE: vdc 1 has come online

System is coming up ... Please wait ...

nohup: appending output to `nohup.out'

2022 Feb 3 16:31:14 switch %$ VDC-1 %$ %USER-2-SYSTEM_MSG: Running in PIO stats mode - carmelusd

Cisco UCS 6200 Series Fabric Interconnect

switch-A login: admin

Password:

Cisco Nexus Operating System (NX-OS) Software

switch-A /license # show feature

License feature:

Name Vendor Version Type Grace Period

------------------------- ------ ------- ------------------ ------------

ETH_PORT_ACTIVATION_PKG cisco 1.0 Counted 120

ETH_PORT_C_ACTIVATION_PKG cisco 1.0 Counted 120

switch-A /license # show usage

Feat Name Scope Default Total Quant Used Quant Subordinate

Quant State Peer Count Comparison Grace Used

------------------------------ ----- ------- ----------- ---------- ------------

-------- -------------------- ----------------------- ----------

ETH_PORT_ACTIVATION_PKG A 20 32 0

0 Not Applicable No Peer 0

ETH_PORT_C_ACTIVATION_PKG A 0 0 0

0 Not Applicable No Peer 0

switch-A# show system firmware

UCSM:

Running-Vers: 2.2(6e)

Package-Vers: 2.2(6e)A

Activate-Status: Ready

VAT @ 20% INCLUDED IN PRICE - VAT INVOICE PROVIDED

£200 excluding VAT

VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UK

SL 259058

SL 259059

SL 259060

SL 259061

SL 259062

SL 259063

SL 259064

SL 259065

SL 259066

SL 259067

SL 259068

SL 259069