Features: 1. Atomized water quality and adaptable, the same nebulizer use pure water or tap water can work. 2. The power for a wide range of products to ensure that the changes in the city still under normal use larger occasions. 3. With power supply polarity protection circuit prevents damage to the product user interface instead (reverse does not work). 4. There boot delay circuit, to avoid a power surge current excessive damage to the line. 5. A single sprinkler line using an independent design, and the use of over-current protection circuit, avoiding the burning of a nozzle damaged power lines, and does not affect the normal operation of other jets. 6. The machine current voltage and temperature by less influence, because each nozzle current electronic automatic adjustment, the current increasing temperature will decrease (does not affect the amount of fog), to avoid serious power tube heat current increasing the vicious cycle and damage the atomizer. 7. This product uses high thermal conductivity, high corrosion resistance, good mechanical strength of the metal shell, reducing the temperature difference between the water inside the host, thereby prolonging the life of the product
Specification: 1.Power supply: National standard three flat plug, 220V 2.Working Voltage: DC48V 3.Working Current: 4.8A-5A 4.Power: 360W 5.Output power: 250W 6.Spray volume: 3500- 5000ML / H 7.Cooling model: Air-cooled 8.Shell Material: 304 stainless steel shell, shell polished surface treatment
Note: 1. When the atomizer work, please do not put your hand over the top of the atomizer spray chamber to prevent ultrasonic wounded. 2. Nebulizer must be working in the water in order, before using the water and then put it in its power, and to ensure that there is water in a spray film surface state, in order to avoid damage to the nebulizer. 3. When you stop using the nebulizer before disconnect the power, then remove from the water atomizer. 4. When using the nebulizer, please use the output power of more than 250W, the output voltage is DC45 �� 5V supply. 5. When generating a plurality of atomizer is set using the same container, each with a separate power supply need not connect a plurality of the nebulizer for use with a single power supply, and note the respective atomizer are mutually conductive housing, in order to prevent the work galvanic corrosion. 6. Mist generated by the nebulizer must use fan forced discharge, and each group of nebulizer reserved 350CM2 of flat space, the water temperature is too high to avoid shortening the life of the nebulizer. 7. Nebulizer not suitable for corrosive liquid atomization, to avoid damage to the atomizer and atomized metal sheet. 8. Do not damaged during installation level sensor switch, switch failure caused the water level to prevent runaway nebulizer. Level switch should stop after the damage, otherwise there will be further damaged dry atomized piece atomizer. At this point in order to use the required repairs by qualified service personnel after a good.
Package Included: 1 x 10 head Ultrasonic mist maker
If any question, please feel free to click via "Ask seller a question"
,We try our best to reply to your emails as soon as possible, due to
high volume of daily incoming emails and time zone difference, we may
not be able to reply your emails immediately.Please allow 1-2 business
days for us to response.
1. All payments must be prepaid. 2. Payment must be received within 7 business days of auction closing. 3. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
PLEASE NOTE:Price does NOT INCLUDE DUTIES, LOCAL TAXES OR ANY OTHER IMPORTATION FEES. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding / buying.
1. We are not responsible for
undeliverable address. We reserve the right to charge the shipping fee again for
returned items due to wrong address.
2. We Will ship your orders within 1-10
business days after the payment received. 3. Item shipped via standard logistics methods, It takes about 7-14 business days (USA, CA, AU, UK). Others country 10-20 business days (Brazil, India, RU), Exact delivery time depends on postal process. 4. If you do not receive your item by 30 business days, Please feel free to contact us via eBay mail system , we will try our very best to resolve any problems with you.
NOTE:If you have any questions about the product, please contact us in the first time through eBay message before you open a return request. We will provide you with a good solution and try our best to solve the problem.
1. We have always been trying to provide the best service and
reliable products for every customer, however,accident may happen sometimes
please contact us to resolve any issue before leaving a negative feedback.
2. For all returned products, buyers MUST contact us for the returning address. 3. We offer 30 days money back guarantee return policy. 4. Our warranty does not extended to any products that are physically damaged or
that are not under normal operating conditions as a result of misuse or improper
installation on the buyer/user's part.
Am 22.04.2022 hat der Verkäufer die folgenden Angaben hinzugefügt:
