![](https://images.imagesamzfu.com/q6e/xz/58/ALB2Nl2tMY4WFdSlZcy8yMi8wNi92LzI0MDIwNTM3LzE0LmpwZw.jpg)
Description:
It is easy to use, what you have to do is to plug our OBD2 scanner into your vehicle's OBD2 port, connect to your mobile device through Bluetooth-compatible created by OBD reader.
What this diagnostic tool can offer you is that it can display current sensor data, including: engine rpm, calculated load value, coolant temperature, fuel system status, vehicle speed, short term fuel trim, long term fuel trim, intake manifold pressure, timing advance, intake air temperature, air flow rate, absolute throttle position, oxygen sensor voltages/associated short term fuel trims, fuel system status, fuel pressure and so on.
Made of high quality ABS material, this product is lightweight and durable to use.
The length of the product is 7.5cm, the width is 4.5cm, and the height is 2.5cm.
Bluetooth-compatible elm327 supports android system only, does not support IOS system. ELM327 interface is able to detect and interpret obd2/eobd protocols automatically. It also provides support for high speed communications and a low power sleep mode. It use AT commands to communicate with a host device (PC, notebook, for iOS). Some of them have pretty useful features, such as engine running parameters monitoring, DTC reading and clearing, MPG meter, etc. You can even write your own software on a specified hardware platform if you want, because the AT commands are fully documented and very well explained. This tool is only 2.7 x 1.25x 0.9 inches, and it comes with a 6 ft OBDII cable for easy installation. It also includes a power switch built-in to prevent the need for having to constantly disconnect your unit from the OBDII port. It is compatible with 1996 and later vehicles which are obd2 or eobd compliant.
Item Name: OBD2 Scanner
Firmware Version V1.5 (Supports more protocols SAE J1850 than V2.1). With Chip: PIC18F25K80, Supports All ELM327 Fucntions, In Program ELM327 Identifier, It Shows Full Functions. It Understand Commands Such As ATPPS And Other. The Frequency of the Crystal Oscillator Is 4mHz. Main Functions: With Proper Software Installed In The Host Device, You May Have Following Parameters Read Out From Your Vehicle: Vehicle Speed RPM Fuel Consumption Engine Coolant Temp Fuel Pressure Calculated Engine Load Throttle Position Intake Manifold Pressure Air Intake Temp Timing Advance Mass Air Flow Fuel Level Barometric Pressure EVAP System Pressure Fuel Trim Note: Your Vehicle May Not Support All Above Parameters. How Many Parameters You Can Get Is Depended On The Vehicle Manufacturer Implementation. Support Protocols: 1.SAE J1850 PWM(41.6Kbaud) 2.SAE J1850 VPW(10.4Kbaud) 3.ISO9141-2(5 baud init,10.4Kbaud) 4.ISO14230-4 KWP(5 baud init,10.4 Kbaud) 5.ISO14230-4 KWP(fast init,10.4 Kbaud) 6.ISO15765-4 CAN(11bit ID,500 Kbaud) 7.ISO15765-4 CAN(29bit ID,500 Kbaud) 8.ISO15765-4 CAN(11bit ID,250 Kbaud) 9.ISO15765-4 CAN(29bit ID,250 Kbaud) Supported Cars: If Your Vehicle Does Not Fall Into Any Of The Above Categories, Look Under The Hood And Try To Locate A Label That Explicitly States That The Vehicle Was Designed To Comply With OBD-2 Legislation. This ELM327 Usually Can Work On Most New Car With OBD 16Pin Adapter And 12V Engine: For USA Car Brand, After 1996 For Europe Car Brand(Petrol), After 2001 For Europe Car Brand(Diesel), After 2004 For Japan Car Brand, After 2002 For Korea Car Brand, After 2010 For Chinese Car Brand, After 2009 For Indian Car Brand, After 2010 For Russian Car Brand, After 2012
Notes:
Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.
1 x OBD2 Scanner
It is easy to use, what you have to do is to plug our OBD2 scanner into your vehicle's OBD2 port, connect to your mobile device through Bluetooth-compatible created by OBD reader.
What this diagnostic tool can offer you is that it can display current sensor data, including: engine rpm, calculated load value, coolant temperature, fuel system status, vehicle speed, short term fuel trim, long term fuel trim, intake manifold pressure, timing advance, intake air temperature, air flow rate, absolute throttle position, oxygen sensor voltages/associated short term fuel trims, fuel system status, fuel pressure and so on.
Made of high quality ABS material, this product is lightweight and durable to use.
The length of the product is 7.5cm, the width is 4.5cm, and the height is 2.5cm.
Bluetooth-compatible elm327 supports android system only, does not support IOS system. ELM327 interface is able to detect and interpret obd2/eobd protocols automatically. It also provides support for high speed communications and a low power sleep mode. It use AT commands to communicate with a host device (PC, notebook, for iOS). Some of them have pretty useful features, such as engine running parameters monitoring, DTC reading and clearing, MPG meter, etc. You can even write your own software on a specified hardware platform if you want, because the AT commands are fully documented and very well explained. This tool is only 2.7 x 1.25x 0.9 inches, and it comes with a 6 ft OBDII cable for easy installation. It also includes a power switch built-in to prevent the need for having to constantly disconnect your unit from the OBDII port. It is compatible with 1996 and later vehicles which are obd2 or eobd compliant.
Item Name: OBD2 Scanner
Firmware Version V1.5 (Supports more protocols SAE J1850 than V2.1). With Chip: PIC18F25K80, Supports All ELM327 Fucntions, In Program ELM327 Identifier, It Shows Full Functions. It Understand Commands Such As ATPPS And Other. The Frequency of the Crystal Oscillator Is 4mHz. Main Functions: With Proper Software Installed In The Host Device, You May Have Following Parameters Read Out From Your Vehicle: Vehicle Speed RPM Fuel Consumption Engine Coolant Temp Fuel Pressure Calculated Engine Load Throttle Position Intake Manifold Pressure Air Intake Temp Timing Advance Mass Air Flow Fuel Level Barometric Pressure EVAP System Pressure Fuel Trim Note: Your Vehicle May Not Support All Above Parameters. How Many Parameters You Can Get Is Depended On The Vehicle Manufacturer Implementation. Support Protocols: 1.SAE J1850 PWM(41.6Kbaud) 2.SAE J1850 VPW(10.4Kbaud) 3.ISO9141-2(5 baud init,10.4Kbaud) 4.ISO14230-4 KWP(5 baud init,10.4 Kbaud) 5.ISO14230-4 KWP(fast init,10.4 Kbaud) 6.ISO15765-4 CAN(11bit ID,500 Kbaud) 7.ISO15765-4 CAN(29bit ID,500 Kbaud) 8.ISO15765-4 CAN(11bit ID,250 Kbaud) 9.ISO15765-4 CAN(29bit ID,250 Kbaud) Supported Cars: If Your Vehicle Does Not Fall Into Any Of The Above Categories, Look Under The Hood And Try To Locate A Label That Explicitly States That The Vehicle Was Designed To Comply With OBD-2 Legislation. This ELM327 Usually Can Work On Most New Car With OBD 16Pin Adapter And 12V Engine: For USA Car Brand, After 1996 For Europe Car Brand(Petrol), After 2001 For Europe Car Brand(Diesel), After 2004 For Japan Car Brand, After 2002 For Korea Car Brand, After 2010 For Chinese Car Brand, After 2009 For Indian Car Brand, After 2010 For Russian Car Brand, After 2012
Notes:
Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.
1 x OBD2 Scanner
1. We acceptPayPal,Credit card,Debit card,Apple Pay,Google Pay ect as payment.
2. Please be sure your shipping address is correct before make a payment.
2. Please be sure your shipping address is correct before make a payment.
1. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. Items will be shipped within 1-7 business days when we received payment.
3. Delivery time depends on destination and other factors.
4. International buyers please note:
2. Items will be shipped within 1-7 business days when we received payment.
3. Delivery time depends on destination and other factors.
4. International buyers please note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer's responsibility. We will try our best to reduce the risk of the custom duties.
b. Please check with your country's customs office to determine what these additional costs will be prior to buying.
30 DAY RETURN POLICY
Customer Satisfaction is our main goal, all items are quality checked prior to being listed and sent out. Please contact us prior to leaving any Negative Feedback and allow us to make things right!
If you not satisfied with it please include the original packaging and return form & tracking number otherwise the return may take longer to process the refund. Once we have received the item and inspected it we will issue the refund or resend within 1-7 business days.
Customer Satisfaction is our main goal, all items are quality checked prior to being listed and sent out. Please contact us prior to leaving any Negative Feedback and allow us to make things right!
If you not satisfied with it please include the original packaging and return form & tracking number otherwise the return may take longer to process the refund. Once we have received the item and inspected it we will issue the refund or resend within 1-7 business days.
Please contact us in time if any enquriy under any circumstances. We greatly appreciate your positive feedback and we'll do the same to you. We care about our valued customers, and will always try our best to help you, if you have any problems. Working time: GMT+8 / 9:00-18:30 in normal we will reply you in one working day.