Supermicro CSE-825 X10DRC-LN4+ CTO Dual E5-2600v4 Family 8x DIMM 8-Bay 2U Server
Model: SuperChassis CSE-825
Motherboard P/N: X10DRC-LN4+ rev:1.01

CTO(Configure To Order) Server
No CPU, No Memory and No Drives included - we can quote for these if required

In Good Condition
In Full Working Order
Tested
Included
  • 1 x Supermicro CSE-825 X10DRC-LN4+ CTO Dual E5-2600v4 Family 8x DIMM 8-Bay 2U Server
  • 1 x DVD Drive Teac DV-28S-AZ3
  • 1 x 2-Port 10GbE SFP PCIe Card
  • 2 x Power Supplies  PWS-741-1R
Specification
  • Bays: 8 x 3.5” SAS Bays with 8 x 3.5" caddies
  • Backplane: 8-Bay SAS-825-TQ rev:2.0
  • DVD Drive Backplane: UL94V-0 Rev 3.03
  • Motherboard: X10DRC-LN4+ rev:1.01
  • 8 x DDR3 DIMM Slots
  • Power Supply: 2 x 720W PSU - PWS-721P-1R
  • 2-Port 10GbE SFP PCIe Card
Manufacturer's Motherboard Specification
Physical Stats
Form Factor
  • E.E. ATX
Dimensions
  • 13.68" x 13" (34.75cm x 33.02cm)
 
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 v3, Intel® Xeon® processor E5-2600 v4.
  • Dual Socket R3 (LGA 2011) supported, CPU TDP support Up to 145W
Cores / Cache
  • Up to 22 cores † / Up to 55MB† cache
Note
  • † BIOS version 2.0 or above is required
Note
  • ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
 
System Memory
Memory Capacity
  • Up to 768GB Registered ECC RDIMM, DDR4-2400MHz; Up to 3TB 3DS ECC LRDIMM, in 24 DIMM slots
Memory Type
  • 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 4GB, 8GB, 16GB, 32GB
  • LRDIMM: 32GB, 64GB
  • 3DS LRDIMM: 128GB
Memory Voltage
  • 1.2V
Error Detection
  • Corrects single-bit errors
 
On-Board Devices
Chipset
  • Intel® C612
SATA
  • Intel® C612 controller for 10 SATA3 (6 Gbps) ports; RAID 0,1,5,10
SAS
  • Broadcom 3108 SAS3 (12Gbps) controller; HW RAID 0, 1, 5, 6, 10, 50, 60
    2GB Cache with optional SuperCap backup module
    Supports up to 16 devices as default, more HDD devices support is also available as an option *
    For special SKU, please contact your Supermicro Sales.
AHCI SATA
  • SATA3 (6Gbps); RAID 0, 1, 5, 10
SCU SATA
  • SATA3 (6Gbps); RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Quad LAN with Intel® i350 Gigabit Ethernet Controller
    Single LAN with Virtual Machine Device Queues reduce I/O overhead
    Single LAN with Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output
    Single LAN with 1 Realtek RTL8211E PHY (dedicated IPMI)
Graphics
  • Aspeed AST2400 BMC
 
Input / Output
SATA
  • 10 SATA3 (6Gbps) port
LAN
  • 4 RJ45 Gigabit Ethernet LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 2 USB 2.0 ports (2 rear Type A))
  • 3 USB 3.0 ports (2 rear + 1 Type A)
Video Output
  • 1 VGA port
Serial Port / Header
  • 2 COM Ports (1 rear, 1 header)
    2 fast UART 16550 serial
TPM
  • 1 TPM Header
Expansion Slots
PCI-E
  • 2 PCI-E 3.0 x16,
  • 3 PCI-E 3.0 x8
  • 1 PCI-E 2.0 x4 (in x8 slot)
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
 
Management
Software
  • Intel® Node Manager, IPMI2.0, KVM with dedicated LAN, NMI, SuperDoctor® 5, Watchdog
Power Configurations
  • ACPI Power Management
  • Power-on mode for AC power recovery
 
PC Health Monitoring
Voltage
  • +1.8V, +12V, +3.3V, +5V, +5V standby, 3.3V standby, 6 Phase-switching voltage regulator, Chassis intrusion header, Memory Voltages
FAN
  • 7x 4-pin fan headers (up to 7 fans), 8x fans with tachometer monitoring, Pulse Width Modulated (PWM) fan connectors, Status monitoring for speed control
Temperature
  • Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Control for 8 Fan Connectors, Thermal Monitor 2 (TM2) support, PECI
LED
  • CPU / System Overheat LED, Suspend static indicator LED, UID/Remote UID
Other Features
  • Chassis intrusion detection, Chassis intrusion header, RoHS, SDDC
 
Operating Environment
Operating Temperature Range
  • 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)
























VAT @  20% INCLUDED IN PRICE - VAT INVOICE PROVIDED
£300 excluding VAT

VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UK
LJM 282153 282154 282156 282157 282158 282159 cto